BUKH Diesel Engine Parts are essential components for the efficient operation of marine diesel engines like the DV20, DV24, DV36, and DV48. These genuine spare parts, including fuel and oil filters, water pumps, and other engine spares, are designed to ensure optimal performance and reliability. BUKH engines are widely used in boats and maritime applications, offering high-quality solutions for maintenance, cooling, and power generation, supported by the manufacturer's technical data.
|
1-2 weeks delivery time The Bukh cylinder head gasket is designed for marine diesel cylinder head sealing applications.
|
$ 279.56
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E7698 flange is a cooling-system connection component for the two-circuit cooling arrangement on BUKH DV20 marine diesel engines. It supports a secure joint within the cooling assembly, helping maintain dependable coolant flow routing and a tight, service-ready interface in the engine’s cooling circuit.
|
$ 237.87
-
+
| ||
|
1-2 weeks delivery time The Bukh marker arrow is intended for marine engine identification and service marking applications.
|
$ 40.18
-
+
| ||
|
1-2 weeks delivery time The Bukh marker arrow is intended for marine engine identification and service marking applications.
|
$ 32.72
-
+
| ||
|
1-2 weeks delivery time The Bukh oil cooler elbow is intended for marine diesel oil cooler line connection applications.
|
$ 59.53
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E7787 M10x1 banjo bolt is a hollow fastener designed to secure banjo-style line connections in BUKH marine systems. It provides a dependable, OEM-correct fit for service and repairs and is supplied as the current replacement for earlier part number 008E6748.
|
$ 54.16
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E7788 exhaust flange is a dedicated connection component for the exhaust system on BUKH DV36 marine diesel engines. It helps create a secure, aligned joint at the exhaust interface, supporting dependable routing of exhaust gases and stable installation under marine operating conditions.
|
$ 511.88
-
+
| ||
|
1-2 weeks delivery time The Bukh key is intended for marine engine shaft, gear, or mechanical locking applications.
|
$ 73.13
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E7886 preheating inlet hose connection provides a secure interface for routing a preheating line into the engine’s heating circuit. Designed with a 16 mm hose connection and an M14x1.5 thread, it supports clean, leak-resistant installation when servicing or renewing the preheating inlet connection on Bukh marine diesel systems.
|
$ 139.01
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E7887 preheating outlet hose connection provides a secure outlet point for the engine preheating circuit, making it easy to route a hose connection where auxiliary heating or warm-up is required. Sized for 16 mm (3/8 in) hose service, it is a practical replacement part for maintaining clean, leak-resistant plumbing in marine engine installations.
|
$ 184.01
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E7999 exhaust manifold sealing gasket is designed to secure a tight, reliable seal at the exhaust manifold joint in Bukh marine diesel installations. By helping contain exhaust gases and maintaining proper manifold sealing, it supports clean, efficient exhaust flow and dependable operation under marine heat and vibration.
|
$ 34.56
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E8056 banjo bolt is a hollow fastener designed to secure banjo-style connections in marine engine fluid lines. It supports a tight, reliable joint while allowing controlled flow through the bolt, making it a dependable replacement choice for service work where clean, leak-resistant connections matter.
|
$ 158.72
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E8081 intermediate flange gasket is a sealing element designed to close the joint at the intermediate flange connection. Installed in the flange interface, it helps maintain a tight seal to support clean, reliable operation and reduce the risk of leakage at the mating surfaces.
|
$ 50.61
-
+
| ||
|
1-2 weeks delivery time The Bukh hose nipple is designed for marine engine hose and fluid line connection applications.
|
$ 55.45
-
+
| ||
|
1-2 weeks delivery time The Bukh hose nipple with ball head is designed for marine engine hose connection applications.
|
$ 52.25
-
+
| ||
|
1-2 weeks delivery time The Bukh union screw is intended for marine engine fluid line connection applications.
|
$ 26.52
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E8203 intermediate flange is a precision-fit mounting component used to join and align mating assemblies in Bukh marine equipment. Designed to maintain correct positioning between connected parts, it supports stable installation, consistent alignment, and dependable operation in demanding onboard conditions.
|
$ 558.71
-
+
| ||
|
1-2 weeks delivery time The Bukh LDA spring is designed for marine diesel fuel control system service applications.
|
$ 28.28
-
+
| ||
|
1-2 weeks delivery time The Bukh spacer gasket is intended for marine engine spacing and sealing applications.
|
$ 37.95
-
+
| ||
|
1-2 weeks delivery time The Bukh charging alternator bracket is designed for marine engine alternator mounting applications.
|
$ 89.31
-
+
| ||
What types of filters are included in the BUKH diesel engine parts range for marine applications?
The BUKH diesel engine parts range for marine applications includes both fuel and oil filters designed to maintain optimal performance and longevity. These filters are essential for protecting the engine from contaminants and ensuring smooth operation in various marine environments. Available for models such as the BUKH DV10, they meet high-quality standards to suit both small and large vessels worldwide.
How does the BUKH anode contribute to protecting marine diesel engines from corrosion?
The BUKH anode plays a crucial role in protecting marine diesel engines from corrosion by acting as a sacrificial component. It helps to prevent the buildup of harmful electrolysis that can damage key engine parts, such as the fuel pump and water pump. Regularly replacing the anode ensures the longevity and efficiency of the engine, maintaining optimal performance for both small and large marine applications.
What maintenance is required for the fuel pump in a BUKH engine?
Regular maintenance for the fuel pump in a BUKH marine engine includes checking and replacing fuel filters to ensure clean fuel flow. It's also important to inspect the pump for any signs of wear or damage, following the manufacturer's manual.