BUKH Diesel Engine Parts are essential components for the efficient operation of marine diesel engines like the DV20, DV24, DV36, and DV48. These genuine spare parts, including fuel and oil filters, water pumps, and other engine spares, are designed to ensure optimal performance and reliability. BUKH engines are widely used in boats and maritime applications, offering high-quality solutions for maintenance, cooling, and power generation, supported by the manufacturer's technical data.
|
1-2 weeks delivery time The Bukh 000E6358 oil gasket is a sealing element for the turbocharger oil system on BUKH DV48 marine diesel engines. Designed to help create a tight seal at the oil connection, it supports clean, leak-free operation and dependable lubrication flow to the turbocharger during continuous marine service.
|
$ 23.31
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E6543 locking screw is a secure closure fastener used on BUKH DV10LME marine engines to lock and seal a threaded port in its intended assembly. It helps maintain system integrity by keeping the connection tight under vibration, supporting clean, dependable engine operation in marine service.
|
$ 65.90
-
+
| ||
|
1-2 weeks delivery time The Bukh intermediate shaft is intended for marine drivetrain and transmission connection applications.
|
$ 943.36
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E6691 intermediate housing is a structural engine component designed to support and locate adjoining parts within a Bukh assembly. Built for dependable alignment and secure mounting, it helps maintain proper fit between connected sections, supporting smooth operation and serviceable installation in Bukh engine applications.
|
$ 1,672.26
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E6851 intermediate arm is a linkage component used on BUKH ADV10LME and DV10LME engines to transmit movement between connected parts in the related arm assembly. Built as a direct replacement part, it helps maintain precise, dependable mechanical operation where accurate motion transfer matters onboard.
|
$ 81.43
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E6907 charge controller holder provides a secure mounting point for the charge controller in a marine electrical installation. Designed as a dedicated bracket-style support, it helps keep the controller firmly positioned to reduce vibration-related stress and maintain a clean, service-friendly installation.
|
$ 148.27
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E7013 air filter bushing is a precision fit component for the air filter assembly on BUKH DV10LME marine diesel engines. It supports secure mounting and correct alignment of the air filter parts, helping maintain a stable, rattle-free installation and consistent airflow management in the engine’s intake system.
|
$ 50.56
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E7029 cover lid with an alarm hole is a practical replacement component designed to close and protect its housing while providing a dedicated pass-through for an alarm device or indicator. It supports clean installation and helps keep the alarm arrangement securely positioned in place.
|
$ 47.12
-
+
| ||
|
1-2 weeks delivery time The Bukh gear wheel is intended for marine engine gear train and drivetrain service applications.
|
$ 880.67
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E7075 insulated socket is an electrical insulating component used to separate and protect conductors and connection points in marine installations. It helps reduce the risk of unintended electrical contact by providing isolation where secure, vibration-resistant routing and protection are required.
|
$ 53.86
-
+
| ||
|
1-2 weeks delivery time The Bukh insulating washer is intended for marine electrical or mechanical isolation applications.
|
$ 19.27
-
+
| ||
|
1-2 weeks delivery time The Bukh intermediate piece is intended for marine engine installation and component connection applications.
|
$ 113.69
-
+
| ||
|
1-2 weeks delivery time The Bukh cover is designed for marine engine protection and service applications.
|
$ 92.55
-
+
| ||
|
1-2 weeks delivery time The Bukh distance piece is intended for marine engine installation and spacing applications.
|
$ 53.86
-
+
| ||
|
1-2 weeks delivery time The Bukh bracket is designed for marine engine installation and component support applications.
|
$ 198.49
-
+
| ||
|
1-2 weeks delivery time The Bukh DV36 inlet manifold is intended for marine diesel air intake distribution applications.
|
$ 658.91
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E7282 intermediate plate is a saildrive interface component for BUKH DV36 and DV48 marine diesel engines. Used within the saildrive assembly, it helps maintain correct alignment and secure mating between adjoining housings, supporting stable drivetrain installation and dependable propulsion operation.
|
$ 1,180.41
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E7382 rubber cap is a protective sealing component for the keel cooling system on BUKH DV36 marine diesel engines. It helps close off and safeguard a cooling-system connection point to support clean, controlled coolant flow and dependable temperature management in keel-cooled installations.
|
$ 135
-
+
| ||
|
1-2 weeks delivery time The Bukh suction pipe is intended for marine engine fluid intake or pump system applications.
|
$ 101.25
-
+
| ||
|
1-2 weeks delivery time The Bukh connection pipe is intended for marine engine fluid or exhaust system connection applications.
|
$ 128.55
-
+
| ||
What types of filters are included in the BUKH diesel engine parts range for marine applications?
The BUKH diesel engine parts range for marine applications includes both fuel and oil filters designed to maintain optimal performance and longevity. These filters are essential for protecting the engine from contaminants and ensuring smooth operation in various marine environments. Available for models such as the BUKH DV10, they meet high-quality standards to suit both small and large vessels worldwide.
How does the BUKH anode contribute to protecting marine diesel engines from corrosion?
The BUKH anode plays a crucial role in protecting marine diesel engines from corrosion by acting as a sacrificial component. It helps to prevent the buildup of harmful electrolysis that can damage key engine parts, such as the fuel pump and water pump. Regularly replacing the anode ensures the longevity and efficiency of the engine, maintaining optimal performance for both small and large marine applications.
What maintenance is required for the fuel pump in a BUKH engine?
Regular maintenance for the fuel pump in a BUKH marine engine includes checking and replacing fuel filters to ensure clean fuel flow. It's also important to inspect the pump for any signs of wear or damage, following the manufacturer's manual.