BUKH Diesel Engine Parts are essential components for the efficient operation of marine diesel engines like the DV20, DV24, DV36, and DV48. These genuine spare parts, including fuel and oil filters, water pumps, and other engine spares, are designed to ensure optimal performance and reliability. BUKH engines are widely used in boats and maritime applications, offering high-quality solutions for maintenance, cooling, and power generation, supported by the manufacturer's technical data.
|
1-2 weeks delivery time The Bukh intermediate pipe is designed for marine engine connection and service applications.
|
$ 30.56
-
+
| ||
|
1-2 weeks delivery time The Bukh alternator cover is designed for marine engine alternator protection applications.
|
$ 43.39
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E8777 Off/Run identification label provides clear operating-position marking for Bukh marine engine controls. Designed to help operators quickly confirm switch or control status, it supports safe, intuitive operation and a tidy, professional-looking control area.
|
$ 3.55
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E8778 start label is a clear identification sign for a control panel, helping operators quickly locate the START marking during engine start procedures. Built for marine control station use, it supports tidy, consistent panel layout and straightforward replacement of worn or missing signage on Bukh control panels.
|
$ 7.56
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E8779 stop sign label is a clear control-panel marking that helps operators quickly identify the STOP function on Bukh marine engine control panels. Designed as a direct replacement label, it supports safe, intuitive operation by keeping critical shutdown identification easy to see at a glance.
|
$ 7.32
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E8782 spacer ring is a precision spacing component for the keel cooling assembly on BUKH DV36 and DV48 marine diesel engines. It helps maintain correct alignment and fit within the keel cooling stack-up, supporting secure assembly and dependable cooling-system operation in marine service.
|
$ 167.98
-
+
| ||
|
1-2 weeks delivery time The Bukh rear end cover is intended for DV36 marine engine ventilation system service applications.
|
$ 195.55
-
+
| ||
|
1-2 weeks delivery time The Bukh fuel pump washer is intended for marine diesel fuel pump service applications.
|
$ 11.54
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E8869 cylinder head stud set secures the cylinder head to the engine structure, helping maintain correct clamping force across the head joint under thermal and vibration loads. These studs are intended for cylinder head fastening on Bukh marine engine applications where dependable, OEM-style fit and retention are essential.
|
$ 96.85
-
+
| ||
|
1-2 weeks delivery time The Bukh water tank is intended for marine engine cooling or onboard water system applications.
|
$ 773.87
-
+
| ||
|
1-2 weeks delivery time The Bukh spacer is intended for marine engine installation and component spacing applications.
|
$ 1,752.94
-
+
| ||
|
1-2 weeks delivery time The Bukh pipe is designed for marine engine cover or ventilation connection applications.
|
$ 121.04
-
+
| ||
|
1-2 weeks delivery time The Bukh stuffing box housing is intended for marine shaft sealing and drivetrain applications.
|
$ 135.84
-
+
| ||
|
1-2 weeks delivery time The Bukh bearing is intended for marine engine mechanical support and service applications.
|
$ 170.84
-
+
| ||
|
1-2 weeks delivery time The Bukh DESMI cover is intended for DV24 marine engine service and protection applications.
|
$ 243.34
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E9334 thrust washer (4.4 mm) is a precision spacing and load-support element used to control axial movement and protect mating surfaces in rotating assemblies. Referenced as ISA27057 and cross-listed as 620A1231, it helps maintain correct end-float and smooth operation where a dedicated thrust washer is required.
|
$ 365.47
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E9344 banjo bolt is a precision fastener used to secure banjo-style fluid connections on Bukh marine equipment. Designed for dependable sealing and secure line retention, it supports stable operation in demanding onboard environments where leak-free fuel, oil, or coolant routing is essential.
|
$ 142.84
-
+
| ||
|
1-2 weeks delivery time The Bukh hollow screw is designed for marine engine fluid line connection applications.
|
$ 38.49
-
+
| ||
|
1-2 weeks delivery time The Bukh exhaust shield fitting is intended for marine diesel exhaust protection installation applications.
|
$ 48.96
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E9368 drive shaft is a direct replacement shaft used to transmit rotational power within the drivetrain, helping maintain smooth and dependable power transfer in Bukh engine installations. It supersedes the earlier part number 000E4913, making it a practical service replacement when refurbishing or repairing shaft-driven assemblies.
|
$ 81.15
-
+
| ||
What types of filters are included in the BUKH diesel engine parts range for marine applications?
The BUKH diesel engine parts range for marine applications includes both fuel and oil filters designed to maintain optimal performance and longevity. These filters are essential for protecting the engine from contaminants and ensuring smooth operation in various marine environments. Available for models such as the BUKH DV10, they meet high-quality standards to suit both small and large vessels worldwide.
How does the BUKH anode contribute to protecting marine diesel engines from corrosion?
The BUKH anode plays a crucial role in protecting marine diesel engines from corrosion by acting as a sacrificial component. It helps to prevent the buildup of harmful electrolysis that can damage key engine parts, such as the fuel pump and water pump. Regularly replacing the anode ensures the longevity and efficiency of the engine, maintaining optimal performance for both small and large marine applications.
What maintenance is required for the fuel pump in a BUKH engine?
Regular maintenance for the fuel pump in a BUKH marine engine includes checking and replacing fuel filters to ensure clean fuel flow. It's also important to inspect the pump for any signs of wear or damage, following the manufacturer's manual.