BUKH Diesel Engine Parts are essential components for the efficient operation of marine diesel engines like the DV20, DV24, DV36, and DV48. These genuine spare parts, including fuel and oil filters, water pumps, and other engine spares, are designed to ensure optimal performance and reliability. BUKH engines are widely used in boats and maritime applications, offering high-quality solutions for maintenance, cooling, and power generation, supported by the manufacturer's technical data.
|
1-2 weeks delivery time The Bukh throttle control cable holder is intended for marine engine control cable mounting applications.
|
$ 98.04
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E0699 valve train push rod is designed for BUKH DV10 and DV20 marine diesel engines, transmitting cam follower motion to the cylinder head valve gear for accurate valve timing. Built for dependable operation in the engine’s mechanical valve actuation system, it supports smooth running and consistent performance when replacing worn or damaged valve train components.
|
$ 161.63
-
+
| ||
|
1-2 weeks delivery time The Bukh axle is intended for marine engine mechanical support and rotating assembly applications.
|
$ 215.36
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E2018 valve cover is a protective top-end engine component that encloses the valve train area and helps keep lubricating oil contained where it belongs. Designed as a direct replacement valve cover, it supports a clean, well-sealed cylinder head area for dependable marine diesel operation.
|
$ 363.23
-
+
| ||
|
1-2 weeks delivery time The Bukh screw is intended for marine engine assembly and service fastening applications.
|
$ 123.74
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E2919 stop pin is a controller hardware component that helps secure and locate the stop mechanism within the control unit. Designed for dependable fit and function in marine control systems, it supports consistent shutdown operation and stable controller movement control during everyday vessel use.
|
$ 76.33
-
+
| ||
|
1-2 weeks delivery time The Bukh chain and gear wheel set is designed for marine diesel hand-start system applications.
|
$ 506.24
-
+
| ||
|
1-2 weeks delivery time The Bukh governor gear wheel is designed for marine diesel engine governor and speed control system applications.
|
$ 593.81
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E3432 spring washer is a locking-type fastener element designed to help maintain bolt tension in vibration-prone installations. Used wherever a spring washer is specified, it supports more secure joints by resisting loosening from engine and drivetrain movement in marine service.
|
$ 7.71
-
+
| ||
|
1-2 weeks delivery time The Bukh lock washer is intended for marine engine fastening and vibration-resistant assembly applications.
|
$ 14.29
-
+
| ||
|
1-2 weeks delivery time The Bukh blind flange is designed for marine engine pipe or system closure applications.
|
$ 47.40
-
+
| ||
|
1-2 weeks delivery time The Bukh freshwater cooler is designed for marine engine freshwater cooling system applications.
|
$ 1,867.37
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E4701 ignition lock cover is a protective cap designed to shield the ignition lock from spray, dirt, and general wear in marine operation. Installed over the ignition lock, it helps keep the starting control area cleaner and supports reliable key operation on Bukh systems.
|
$ 51.41
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E4724 cooling water hose is a dedicated line for the fresh water pump within the DV20 and DV24 dual-circuit cooling system. Designed to route coolant securely through the fresh-water side of the system, it helps maintain stable circulation and dependable temperature control in marine operating conditions.
|
$ 447.56
-
+
| ||
|
1-2 weeks delivery time The Bukh DV10 crankcase is designed for marine diesel engine rebuild and service applications.
|
$ 2,039.36
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E4790 guide bushing is a precision alignment component used to support and guide a moving part in its bore, helping maintain correct positioning and smooth operation in Bukh marine engine assemblies. By stabilizing motion and reducing unwanted play, it contributes to lower wear and more consistent mechanical performance over time.
|
$ 48.21
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E4943 thermostat housing is a cooling-system component for BUKH DV36 and DV48 marine diesel engines, providing a secure mounting point for the thermostat and directing coolant flow through the temperature-control circuit. It supports stable engine operating temperature by ensuring coolant is routed correctly as the thermostat opens and closes during warm-up and load changes.
|
$ 264.32
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E4950 heat exchanger hose is a dedicated hose for the heat exchanger circuit, supporting secure coolant or seawater flow through the heat exchanger assembly. Designed as an OEM replacement part, it helps maintain stable cooling performance by providing a reliable connection within the heat exchanger hose routing.
|
$ 194.55
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E5010 30 mm stuffing box is a shaft-sealing component designed to support dependable watertight operation around a 30 mm shaft. Used as part of the driveline sealing arrangement, it helps control water ingress at the shaft entry point while maintaining smooth, reliable propulsion service in marine conditions.
|
$ 538.38
-
+
| ||
|
1-2 weeks delivery time The Bukh plug is intended for marine engine fluid system sealing and service applications.
|
$ 26.62
-
+
| ||
What types of filters are included in the BUKH diesel engine parts range for marine applications?
The BUKH diesel engine parts range for marine applications includes both fuel and oil filters designed to maintain optimal performance and longevity. These filters are essential for protecting the engine from contaminants and ensuring smooth operation in various marine environments. Available for models such as the BUKH DV10, they meet high-quality standards to suit both small and large vessels worldwide.
How does the BUKH anode contribute to protecting marine diesel engines from corrosion?
The BUKH anode plays a crucial role in protecting marine diesel engines from corrosion by acting as a sacrificial component. It helps to prevent the buildup of harmful electrolysis that can damage key engine parts, such as the fuel pump and water pump. Regularly replacing the anode ensures the longevity and efficiency of the engine, maintaining optimal performance for both small and large marine applications.
What maintenance is required for the fuel pump in a BUKH engine?
Regular maintenance for the fuel pump in a BUKH marine engine includes checking and replacing fuel filters to ensure clean fuel flow. It's also important to inspect the pump for any signs of wear or damage, following the manufacturer's manual.