BUKH Diesel Engine Parts are essential components for the efficient operation of marine diesel engines like the DV20, DV24, DV36, and DV48. These genuine spare parts, including fuel and oil filters, water pumps, and other engine spares, are designed to ensure optimal performance and reliability. BUKH engines are widely used in boats and maritime applications, offering high-quality solutions for maintenance, cooling, and power generation, supported by the manufacturer's technical data.
|
1-2 weeks delivery time The Bukh 000E2584 thermostat rubber ring provides a tight seal at the thermostat housing in the keel cooling system for BUKH DV24RME, DV29RME, and DV32 marine diesel engines. This sealing ring helps prevent coolant leaks and supports stable temperature control by ensuring the thermostat assembly seats correctly during operation.
|
$ 50.32
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E2923 stop pin is a precision locating component used in the stop solenoid assembly on BUKH DV20 to DV32 marine diesel engines, including DV24RME, DV29RME, and DV32. It helps maintain correct alignment and secure operation of the solenoid stop mechanism for dependable engine shut-down control.
|
$ 76.33
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E3051 governor spring is a precision regulating component used in the engine speed control system on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. Fitted within the governor and regulating handle arrangement (and, on DV24RME, also referenced in the camshaft and lubrication system assembly group), it helps maintain stable, responsive engine rpm control under changing load conditions.
|
$ 23.31
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E3053 control spring is a precision spring element used in the engine control mechanism to support stable, predictable control response. Ideal for service replacement on BUKH marine diesel installations, it helps maintain consistent operation by providing the correct spring force within the control and regulating system.
|
$ 28.13
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E3124 shaft is a precision drive component used in the camshaft and lubricating oil system on BUKH DV29RME and DV32 marine diesel engines. Installed within the camshaft, lubricating oil pump, and lubricating oil filter assembly, it helps transmit motion where dependable oil circulation and consistent engine lubrication are essential.
|
$ 152.67
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E3223 front shaft for rotating weights supports smooth, controlled rotation of the balance-weight system in the end cover, rear and rotating weights assembly on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. Built for secure, accurate fit in the rotating-weight arrangement, it helps maintain stable engine operation by keeping key rotating components properly supported and aligned.
|
$ 291.70
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E3224 rear rotating-weights shaft is a precision engine component used in the rear end cover and rotating weights assembly on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. It supports stable rotation and correct alignment of the rotating weight mechanism, helping maintain smooth, reliable operation in demanding marine service.
|
$ 328.15
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E3225 nylon thrust collar ring is a durable thrust-wear component used in rotating weight and shaft-related assemblies on BUKH DV24RME, DV29RME, DV32, DV36, and DV48 marine diesel engines. Positioned in locations such as the rear end cover, flywheel/front end rotating weight area, and rear rotating weight and fuel lift pump assembly, it helps control axial movement and provides a low-friction bearing surface for smooth, stable operation.
|
$ 13.66
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E3226 intermediate disc and washer component supports accurate spacing and secure stack-up in rotating weight and end-cover assemblies across BUKH DV24RME, DV29RME, DV32, DV36, and DV48 marine diesel engines. Used in locations including the rear end cover rotating weights, flywheel and front-end rotating weight group, and the rear rotating weight area near the fuel lift pump, it helps maintain correct alignment for smooth, reliable operation.
|
$ 32.96
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E3397 piston element is built for the camshaft and lubricating-oil system group on BUKH DV29RME and DV32 marine diesel engines. Used within the camshaft, lubricating oil pump, and lubricating oil filter assembly, it supports dependable oil circulation and stable lubrication performance for smooth, protected engine operation.
|
$ 55.42
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E3555 seal is a dedicated sealing element for two-circuit water pump systems, helping maintain a tight, reliable interface within the pump assembly. Designed for marine-duty service, it supports stable coolant circulation by reducing the risk of leaks that can compromise cooling performance.
|
$ 22.49
-
+
| ||
|
1-2 weeks delivery time The Bukh thermostat housing is intended for DV20 marine engine two-circuit cooling system applications.
|
$ 180.38
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E3697 spacer plate is a precision spacing component used to set correct alignment and stand-off between mating parts in a Bukh marine engine assembly. By maintaining the intended gap and positioning, it supports proper fit-up during installation and helps keep connected components running true under vibration and load.
|
$ 9.62
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E3778 keel cooler nut is a securing fastener used in the keel cooling system, tightening the keel tube connection to help keep the cooler assembly firmly sealed and stable under marine operating conditions. It is specified for BUKH DV24RME, DV29RME, DV32, DV36, and DV48 engines using keel cooling.
|
$ 123.72
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E3959 threaded plug component also serves as a locking screw across multiple BUKH engine assemblies, supporting secure sealing and retention where service access points and locking locations are required. Used as a steel bottom plug in the cylinder head and valves assembly on DV24RME, DV29RME, and DV32 engines, and as a locking screw on DV36 and DV48 crankcase, cylinder head, and cover assemblies, it helps maintain reliable engine integrity in marine operation.
|
$ 29.73
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E4301 inlet valve seat is a precision engine component that supports correct inlet valve sealing in the cylinder head. Installed as part of the valve train, it provides a durable seating surface that helps maintain proper compression and efficient combustion performance in BUKH marine diesel engines.
|
$ 61.90
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E4302 exhaust valve seat is a precision valve-train component for the cylinder head exhaust-valve area. It provides a stable seating surface for the exhaust valve to close correctly, supporting strong sealing, efficient heat transfer from the valve to the cylinder head, and dependable operation under continuous marine engine loads.
|
$ 61.90
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E4303 adjusting shim plate (0.15 mm) is a precision spacer used in the fuel system on BUKH DV24RME and DV29RME marine diesel engines. Installed within fuel filter, fuel injection pump, fuel lift pump, and fuel pipe assemblies, it supports accurate component positioning to help maintain stable fuel delivery and dependable engine operation.
|
$ 17.11
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E4554 instrument panel blank disk is a clean, OEM-style cover piece for unused openings in the instrument panel on BUKH DV24RME, DV29RME, DV32, DV36, DV48, and EPA28 marine engines. It helps keep the panel layout tidy and protected while supporting a professional, service-ready helm installation.
|
$ 224.16
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E4557 washer is a precision fit spacing and load-distribution fastener used across multiple BUKH engine assemblies, including cylinder head and valve gear, crankshaft and connecting-rod groups, flywheel areas, fuel injection and valve components, and hand-start equipment. Designed for BUKH DV24RME, DV29RME, DV32, DV36, and DV48 marine diesel engines, it helps secure bolted joints, supports consistent clamping force, and protects mating surfaces during service.
|
$ 17.67
-
+
| ||
What types of filters are included in the BUKH diesel engine parts range for marine applications?
The BUKH diesel engine parts range for marine applications includes both fuel and oil filters designed to maintain optimal performance and longevity. These filters are essential for protecting the engine from contaminants and ensuring smooth operation in various marine environments. Available for models such as the BUKH DV10, they meet high-quality standards to suit both small and large vessels worldwide.
How does the BUKH anode contribute to protecting marine diesel engines from corrosion?
The BUKH anode plays a crucial role in protecting marine diesel engines from corrosion by acting as a sacrificial component. It helps to prevent the buildup of harmful electrolysis that can damage key engine parts, such as the fuel pump and water pump. Regularly replacing the anode ensures the longevity and efficiency of the engine, maintaining optimal performance for both small and large marine applications.
What maintenance is required for the fuel pump in a BUKH engine?
Regular maintenance for the fuel pump in a BUKH marine engine includes checking and replacing fuel filters to ensure clean fuel flow. It's also important to inspect the pump for any signs of wear or damage, following the manufacturer's manual.