BUKH Diesel Engine Parts are essential components for the efficient operation of marine diesel engines like the DV20, DV24, DV36, and DV48. These genuine spare parts, including fuel and oil filters, water pumps, and other engine spares, are designed to ensure optimal performance and reliability. BUKH engines are widely used in boats and maritime applications, offering high-quality solutions for maintenance, cooling, and power generation, supported by the manufacturer's technical data.
|
1-2 weeks delivery time The Bukh 000E0974 front cover is a crankcase and front end cover component for BUKH DV-series marine diesel engines including DV20, DV24RME, DV29RME, and DV32. Designed to close and protect the front end of the engine assembly, it supports a secure, correctly enclosed crankcase area for dependable operation in marine service.
|
$ 785.28
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E0975 sealing gasket is designed for the crankcase and front end cover joint on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. It helps maintain a secure seal at the engine front end, supporting clean assembly and dependable operation by reducing the risk of leakage at this critical interface.
|
$ 73.10
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E1089 fastening nut is a secure, OEM-style hardware piece used within the fuel injection and valve assemblies on BUKH DV36 and DV48 marine diesel engines. It helps hold critical components in position, supporting stable operation, consistent adjustment, and dependable service in the engine’s fuel and valve train areas.
|
$ 4.18
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E1095 bearing bush is a precision bushing used in the rear end cover and rotating weights assembly on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. It supports controlled rotation and alignment of moving components, helping reduce wear and maintain smooth, reliable operation in demanding onboard service.
|
$ 31.60
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E1184 pressure pipe clamp bracket secures the fuel system pressure pipe on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. Used across the fuel filter, fuel injection pump, fuel lift pump, and fuel pipe assemblies, it supports stable routing and helps keep fuel lines properly retained under vibration and engine movement.
|
$ 17.67
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E1185 counter plate is a clamp support component used across the fuel system on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. Installed with a clamp in the fuel filter, fuel injection pump, fuel lift pump, and fuel pipe assemblies, it helps secure lines and components firmly to reduce movement and support tidy, reliable fuel-system routing.
|
$ 17.67
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E1206 rubber damper supports key fuel-system components on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. Installed within the fuel filter, fuel injection pump, fuel lift pump, and fuel pipe mounting locations, it helps cushion vibration and reduce transmitted noise to protect connections and maintain a secure, stable installation in marine service.
|
$ 12.08
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E1207 adjustment screw is a precision setting fastener used to fine-tune key control and timing-related components on BUKH marine diesel engines. Fitted in governor and regulating handle assemblies on DV24RME, DV29RME, and DV32 engines—and also used on DV24RME camshaft, lubricating oil pump, and lubricating oil filter assemblies—it helps maintain stable adjustment, smooth control response, and dependable engine operation.
|
$ 24.40
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E1385 shaft is a precision drive and linkage component used across multiple BUKH DV-series marine diesel assemblies, supporting correct mechanical actuation and timing where fitted. It is used on DV24RME engines in the governor and regulating handle system as well as within the camshaft, lubricating oil pump, and lubricating oil filter assembly, and it also fits DV29RME and DV32 engines in the governor and regulating handle mechanism for smooth, dependable control response.
|
$ 40.96
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E1540 valve cover sealing gasket is designed for the valve cover area on BUKH DV20 marine diesel engines, helping maintain a tight seal to reduce oil seepage and keep the top end of the engine clean and protected. It’s a practical OEM-fit replacement for service work where a secure valve cover seal is essential.
|
$ 97.22
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E1561 cylinder liner is a precision engine component used in the crankshaft, bearings, connecting rod, piston, and cylinder liner assembly on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. It provides a durable running surface for the piston, supporting proper compression control and stable engine performance in demanding marine operation.
|
$ 648.34
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E1758 rear gearwheel is a drivetrain timing and power-transfer component used within the crankshaft and rotating-assembly group on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. Designed for correct meshing and dependable operation, it supports smooth torque transmission and stable engine running in demanding marine service.
|
$ 642.82
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E1770 governor weight is a precision speed-governing component used in the governor system on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. Installed within the governor and regulating handle assembly (and also referenced within the DV24RME camshaft and lubrication group), it supports stable engine speed control by helping the governor respond smoothly to load changes.
|
$ 63.23
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E2118 center main bearing set in 0.6 mm undersize supports accurate crankshaft alignment and smooth rotation in the crankshaft and bearing assembly of BUKH DV24RME, DV29RME, and DV32 marine diesel engines. Designed to restore correct running clearance on an undersize crankshaft journal, it helps reduce wear, maintain stable oil film control, and protect the rotating assembly under continuous marine load.
|
$ 503.04
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E2365 starter mounting bracket supports secure installation of the starter motor on BUKH DV24RME, DV29RME, and DV32 marine diesel engines with electric start. Designed to hold the starter in correct alignment, it helps ensure consistent engagement and dependable cranking performance in the electric starting assembly.
|
$ 573.71
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E2368 adjusting lever clamp is a positioning and securing component used in the electric start assembly on BUKH DV24RME, DV29RME, and DV32 engines, and in the electric start and alternator assembly on BUKH EPA28 and EPA48 engines. It supports controlled adjustment and stable retention of the related mounted parts for reliable operation in marine service.
|
$ 77.96
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E2418 sprocket cover is a protective cover for the chain box on BUKH DV24RME, DV29RME, and DV32 hand-start marine diesel engines. It helps shield the sprocket and chain drive area from debris and accidental contact while supporting a clean, secure engine installation.
|
$ 129.16
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E2462 pump gasket is a sealing element for the keel cooling pump installation on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. It helps maintain a tight, leak-resistant joint at the pump interface, supporting stable coolant circulation and dependable temperature control in the keel cooling system.
|
$ 8.04
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E2487 adjustment shim plate (0.1 mm) is used within the fuel system assemblies of BUKH DV24RME and DV29RME marine diesel engines, including the fuel filter, fuel injection pump, fuel lift pump, and fuel pipe arrangement. It supports precise setup and alignment of fuel-system components to help maintain dependable fuel delivery and consistent engine operation.
|
$ 13.98
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E2488 adjusting plate is a 0.2 mm shim used in the fuel system assemblies on BUKH DV24RME and DV29RME marine diesel engines. Installed within fuel filter, fuel injection pump, fuel lift pump, and fuel pipe assemblies, it supports correct component spacing and alignment for dependable fuel system operation.
|
$ 18.66
-
+
| ||
What types of filters are included in the BUKH diesel engine parts range for marine applications?
The BUKH diesel engine parts range for marine applications includes both fuel and oil filters designed to maintain optimal performance and longevity. These filters are essential for protecting the engine from contaminants and ensuring smooth operation in various marine environments. Available for models such as the BUKH DV10, they meet high-quality standards to suit both small and large vessels worldwide.
How does the BUKH anode contribute to protecting marine diesel engines from corrosion?
The BUKH anode plays a crucial role in protecting marine diesel engines from corrosion by acting as a sacrificial component. It helps to prevent the buildup of harmful electrolysis that can damage key engine parts, such as the fuel pump and water pump. Regularly replacing the anode ensures the longevity and efficiency of the engine, maintaining optimal performance for both small and large marine applications.
What maintenance is required for the fuel pump in a BUKH engine?
Regular maintenance for the fuel pump in a BUKH marine engine includes checking and replacing fuel filters to ensure clean fuel flow. It's also important to inspect the pump for any signs of wear or damage, following the manufacturer's manual.