BUKH Diesel Engine Parts are essential components for the efficient operation of marine diesel engines like the DV20, DV24, DV36, and DV48. These genuine spare parts, including fuel and oil filters, water pumps, and other engine spares, are designed to ensure optimal performance and reliability. BUKH engines are widely used in boats and maritime applications, offering high-quality solutions for maintenance, cooling, and power generation, supported by the manufacturer's technical data.
|
1-2 weeks delivery time The Bukh 000D9625 camshaft bearing bush supports smooth, accurate camshaft rotation in the crankcase and front end cover area on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. Installed as the camshaft’s bearing surface, it helps maintain stable valve timing operation, reduces friction at the camshaft journal, and promotes long service life in the engine front-end assembly.
|
$ 114.89
-
+
| ||
|
1-2 weeks delivery time The Bukh 000D9643 sealing gasket is designed to restore a tight, leak-resistant joint across key engine assemblies on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. Used on the governor and regulating handle area and also within the camshaft, lubricating oil pump, and lubricating oil filter assembly (DV24RME), it helps maintain proper oil control and dependable mechanical operation in marine service.
|
$ 18.48
-
+
| ||
|
1-2 weeks delivery time The Bukh 000D9734 oil pan sealing gasket is designed to restore a tight, reliable seal in the crankcase and front end cover area on BUKH DV-series marine diesel engines, including DV20, DV24RME, DV29RME, and DV32 applications. It helps maintain proper oil containment by sealing the joint surfaces, supporting clean engine operation and reducing the risk of oil seepage in demanding marine service.
|
$ 57.05
-
+
| ||
|
1-2 weeks delivery time The Bukh 000D9758 governor shaft is a precision drivetrain component used in the governor and regulating handle system on BUKH DV20, DV24RME, DV29RME, and DV32 marine diesel engines. It provides a dependable mechanical link for smooth control movement and is also applied within the camshaft and lubricating oil pump and oil filter assembly on DV24RME engines, supporting stable operation and consistent engine response.
|
$ 365.72
-
+
| ||
|
1-2 weeks delivery time The Bukh 000D9759 cotter bolt is a locking fastener used as a key bolt in critical control and timing-related assemblies on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. Installed in the governor and regulating handle area—and on DV24RME also used with the camshaft, lubricating oil pump, and lubricating oil filter—it helps secure components against loosening in vibration-prone engine environments.
|
$ 22.21
-
+
| ||
|
1-2 weeks delivery time The Bukh 000D9762 exhaust manifold gasket provides a secure seal in the exhaust system for BUKH DV24RME, DV29RME, and DV32 marine diesel engines. Used on water-cooled exhaust manifold installations and also specified for the DV32 air inlet and turbocharger assembly, it helps prevent exhaust gas leakage and supports reliable, clean mating between joined components during service and rebuild work.
|
$ 17.74
-
+
| ||
|
1-2 weeks delivery time The Bukh 000D9846 nipple fitting is a compact oil-system connector used across multiple BUKH marine diesel engine assemblies, including the camshaft lubrication circuit and the lubricating oil filter connections. Suitable for DV29RME and DV32 engines at the camshaft, lubricating oil pump, and lubricating oil filter, and for DV36 and DV48 engines at the lubricating oil filter connection within the injection pump and oil cooler area, it helps maintain secure oil line routing and dependable oil flow management.
|
$ 47.40
-
+
| ||
|
1-2 weeks delivery time The Bukh 000D9881 exhaust gasket is a sealing component for the exhaust joint on BUKH DV20, DV24, and DV29 marine diesel engines. It helps maintain a tight exhaust seal to reduce leakage at the mating surfaces, supporting clean exhaust routing and dependable operation in marine service.
|
$ 31.65
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E0403 regulating handle lever provides precise manual control within the governor and regulating handle system on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. Used as part of the engine’s regulation linkage, it supports smooth adjustment and dependable operation, and it is also applied within the camshaft, lubricating oil pump, and lubricating oil filter assembly on DV24RME installations.
|
$ 78.77
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E0450 zinc anode rod (40450) is an individually supplied sacrificial anode used in selected engine assemblies to help protect metal components from galvanic corrosion in a marine environment. It is applied in the crankcase and front end cover on BUKH DV24RME, DV29RME, and DV32 engines, and is also used in the injection pump and oil cooler area on BUKH DV36 and DV48 engines (specified as the version without plug for those applications).
|
$ 62.59
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E0453 front standard main bearing liner is a crankshaft support bearing component for BUKH DV24RME, DV29RME, and DV32 engines within the crankshaft and bearing assembly. It provides a smooth running surface for the crankshaft, helping maintain correct oil film control and reducing wear in the engine’s bottom end under continuous marine duty.
|
$ 225.36
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E0454 rear main bearing liner is a standard-size bearing insert designed to support the crankshaft bearing set in BUKH DV24RME, DV29RME, and DV32 marine diesel engines. Installed at the rear main bearing position, it helps maintain correct crankshaft support and smooth rotation within the crankshaft and bearing assembly for reliable engine operation.
|
$ 441.87
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E0563 standard connecting rod bearing set is a matched pair of identical, smooth bearing shells designed for the connecting rod big-end within the crankshaft and bearing assembly on BUKH DV24RME, DV29RME, DV32, DV36, and DV48 marine diesel engines. Supplied as a two-shell set, it supports stable oil-film operation and dependable crankshaft-to-connecting-rod bearing performance during overhaul or service replacement.
|
$ 155.85
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E0616 front gearwheel key is a precision wedge key used on the crankshaft gearwheel fitment for BUKH DV24RME, DV29RME, and DV32 marine diesel engines. Installed within the crankshaft assembly, it locks the front gearwheel to the shaft to maintain correct drive alignment and dependable power transfer to the engine’s timing and accessory gear train.
|
$ 14.47
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E0617 rear gearwheel key is a crankshaft locating and drive key used to secure the rear gearwheel in the crankshaft gear train on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. This wedge-style key helps maintain correct alignment and positive torque transmission between the crankshaft and the rear gearwheel for stable, dependable engine timing and drivetrain operation.
|
$ 5.84
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E0700 adjustment screw is a precision fastener used within the fuel injection and valve assemblies on BUKH DV36 and DV48 marine diesel engines. It supports accurate mechanical adjustment during service, helping maintain correct settings for stable operation and reliable performance under marine duty.
|
$ 34.74
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E0789 spacer ring is a distance ring used in the rear end cover and rotating weights assembly on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. It helps maintain correct spacing and alignment of rotating components, supporting smooth operation and consistent fit during service or rebuild work.
|
$ 47.40
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E0792 thrust washer is a precision-fit wear component used in the rear end cover and rotating weights assembly on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. It helps control axial movement and protects adjoining parts by providing a stable bearing surface where rotating components run under load.
|
$ 38.57
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E0890 half chain case is a chain box housing section used on the raised hand starting arrangement for BUKH DV24RME, DV29RME, and DV32 marine diesel engines. It encloses and protects the chain drive area, helping keep components aligned and shielded in harsh marine engine-room conditions while supporting a clean, serviceable installation.
|
$ 445.33
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E0894 spring guide plate is a spring locating component used in the raised hand starting assembly on BUKH DV24RME, DV29RME, and DV32 marine diesel engines. It helps keep the starter spring correctly guided and seated for smooth, predictable engagement during manual starting and reliable operation of the starting mechanism.
|
$ 42.57
-
+
| ||
What types of filters are included in the BUKH diesel engine parts range for marine applications?
The BUKH diesel engine parts range for marine applications includes both fuel and oil filters designed to maintain optimal performance and longevity. These filters are essential for protecting the engine from contaminants and ensuring smooth operation in various marine environments. Available for models such as the BUKH DV10, they meet high-quality standards to suit both small and large vessels worldwide.
How does the BUKH anode contribute to protecting marine diesel engines from corrosion?
The BUKH anode plays a crucial role in protecting marine diesel engines from corrosion by acting as a sacrificial component. It helps to prevent the buildup of harmful electrolysis that can damage key engine parts, such as the fuel pump and water pump. Regularly replacing the anode ensures the longevity and efficiency of the engine, maintaining optimal performance for both small and large marine applications.
What maintenance is required for the fuel pump in a BUKH engine?
Regular maintenance for the fuel pump in a BUKH marine engine includes checking and replacing fuel filters to ensure clean fuel flow. It's also important to inspect the pump for any signs of wear or damage, following the manufacturer's manual.