BUKH Diesel Engine Parts are essential components for the efficient operation of marine diesel engines like the DV20, DV24, DV36, and DV48. These genuine spare parts, including fuel and oil filters, water pumps, and other engine spares, are designed to ensure optimal performance and reliability. BUKH engines are widely used in boats and maritime applications, offering high-quality solutions for maintenance, cooling, and power generation, supported by the manufacturer's technical data.
|
1-2 weeks delivery time The Bukh 033E8659 header tank unit with cover supports stable coolant management in a marine engine cooling system by providing a fill and expansion point for the freshwater circuit. Supplied with its cover and referenced as a replacement for earlier part number 008E8659, it helps maintain proper coolant level control and tidy, secure system operation onboard.
|
$ 827.79
-
+
| ||
|
1-2 weeks delivery time The Bukh 033E9753 painted cover is a thermostat housing cover designed to close and protect the thermostat housing on BUKH marine diesel engines. It helps keep the thermostat assembly properly enclosed as part of the engine cooling system, supporting clean installation and dependable temperature control operation.
|
$ 215.97
-
+
| ||
|
1-2 weeks delivery time The Bukh leak oil connection is designed for DV48 marine diesel fuel return or leak-off system applications.
|
$ 1,134.77
-
+
| ||
|
1-2 weeks delivery time The Bukh 033T1710 turbocharger kit is a complete replacement kit for boosting performance on BUKH DV48 and DV32 marine diesel engines. Designed to restore proper forced-induction operation, it supports efficient air delivery to the engine for strong, consistent running; for DV32 installations, adapter kit 022T1709 must also be ordered to ensure correct fitment.
|
$ 5,807.43
-
+
| ||
|
1-2 weeks delivery time The Bukh complete gasket set is designed for DV48 marine diesel engine service and sealing applications.
|
$ 1,817.95
-
+
| ||
|
1-2 weeks delivery time The Bukh 033T4310 water-cooled exhaust manifold is a marine exhaust component for BUKH DV48 engines, designed to route exhaust gases while using engine cooling water to control surface and gas temperatures. As a direct replacement manifold, it supports safe, stable exhaust flow and helps protect nearby engine-room components from excess heat.
|
$ 714.22
-
+
| ||
|
1-2 weeks delivery time The Bukh 037D4202 cylinder head sealing set is built to restore a tight, dependable seal between the cylinder head and engine block on BUKH DV10LSME marine diesel engines. Designed for head service work, it helps maintain compression while keeping coolant and oil passages properly separated for stable, efficient running.
|
$ 342.86
-
+
| ||
|
1-2 weeks delivery time The Bukh flywheel with gear rim is intended for DV20, DV24, DV29, and DV32 marine diesel drivetrain applications.
|
$ 1,282.94
-
+
| ||
|
1-2 weeks delivery time The Bukh 038E9079 valve cover is a top-end engine cover designed for BUKH DV24 and DV32 marine diesel engines. Fitted over the valve train, it helps contain engine oil, protects internal components from contamination, and supports clean, service-friendly access during routine maintenance.
|
$ 919.42
-
+
| ||
|
1-2 weeks delivery time The Bukh auto drain hose is intended for marine engine drain system applications.
|
$ 5.62
-
+
| ||
|
1-2 weeks delivery time The Bukh camshaft oil seal installer is intended for marine diesel camshaft seal service operations.
|
$ 91.09
-
+
| ||
|
1-2 weeks delivery time The Bukh valve stem oil seal installer is intended for marine diesel valve seal service operations.
|
$ 37.07
-
+
| ||
|
1-2 weeks delivery time The Bukh valve spring compressor is intended for marine diesel cylinder head service and valve train maintenance applications.
|
$ 901.91
-
+
| ||
|
1-2 weeks delivery time The Bukh oil seal installer is intended for marine diesel crankshaft rear seal service operations.
|
$ 239.96
-
+
| ||
|
1-2 weeks delivery time The Bukh front oil seal installer is designed for marine diesel crankshaft seal service operations.
|
$ 111.41
-
+
| ||
|
1-2 weeks delivery time The Bukh oil filter wrench is intended for marine diesel oil filter service operations.
|
$ 43.08
-
+
| ||
|
1-2 weeks delivery time The Bukh injector oil seal installer is designed for marine diesel injector service operations.
|
$ 61.72
-
+
| ||
|
1-2 weeks delivery time The Bukh compression gauge adapter is intended for marine diesel engine diagnostic applications.
|
$ 144.62
-
+
| ||
|
1-2 weeks delivery time The Bukh oil pressure sensor gasket is intended for V8 marine diesel sensor sealing applications.
|
$ 45.97
-
+
| ||
|
1-2 weeks delivery time The Bukh TTM60A-A7 marine gearbox is designed for propulsion transmission system applications.
|
$ 17,514.64
-
+
| ||
What types of filters are included in the BUKH diesel engine parts range for marine applications?
The BUKH diesel engine parts range for marine applications includes both fuel and oil filters designed to maintain optimal performance and longevity. These filters are essential for protecting the engine from contaminants and ensuring smooth operation in various marine environments. Available for models such as the BUKH DV10, they meet high-quality standards to suit both small and large vessels worldwide.
How does the BUKH anode contribute to protecting marine diesel engines from corrosion?
The BUKH anode plays a crucial role in protecting marine diesel engines from corrosion by acting as a sacrificial component. It helps to prevent the buildup of harmful electrolysis that can damage key engine parts, such as the fuel pump and water pump. Regularly replacing the anode ensures the longevity and efficiency of the engine, maintaining optimal performance for both small and large marine applications.
What maintenance is required for the fuel pump in a BUKH engine?
Regular maintenance for the fuel pump in a BUKH marine engine includes checking and replacing fuel filters to ensure clean fuel flow. It's also important to inspect the pump for any signs of wear or damage, following the manufacturer's manual.