BUKH Diesel Engine Parts are essential components for the efficient operation of marine diesel engines like the DV20, DV24, DV36, and DV48. These genuine spare parts, including fuel and oil filters, water pumps, and other engine spares, are designed to ensure optimal performance and reliability. BUKH engines are widely used in boats and maritime applications, offering high-quality solutions for maintenance, cooling, and power generation, supported by the manufacturer's technical data.
|
1-2 weeks delivery time The Bukh stern tube bearings are intended for marine shaft support and propulsion drivetrain applications.
|
$ 2,149.65
-
+
| ||
|
1-2 weeks delivery time The Bukh 032D9522 cylinder head assembly with integrated cast exhaust manifold is a complete top-end replacement for BUKH DV24, DV29, and DV32 marine diesel engines from engine number 119726. Supplied complete with valves, it restores proper combustion sealing and dependable exhaust gas routing, helping maintain efficient, reliable engine operation under marine duty.
|
$ 7,435.35
-
+
| ||
|
1-2 weeks delivery time The Bukh 032E9774 complete painted base cover is a ready-to-install cover assembly for BUKH DV24 and DV29 marine diesel engines. Supplied as a complete unit, it replaces the earlier 008E9774 version and provides a clean, protected engine base area for a tidy, durable installation.
|
$ 1,516.34
-
+
| ||
|
1-2 weeks delivery time The Bukh 032E9778 crankshaft spline is a crankshaft drive component for BUKH 2-cylinder marine diesel engines, designed to provide a secure, positive torque transfer at the crankshaft output interface. Used as a service replacement (replacing 008E9787), it helps maintain correct power transmission to downstream driveline components for dependable propulsion operation.
|
$ 3,877.34
-
+
| ||
|
1-2 weeks delivery time The Bukh complete gasket set is intended for marine diesel engine service and sealing applications.
|
$ 1,170.84
-
+
| ||
|
1-2 weeks delivery time The Bukh complete crankshaft is designed for DV36 marine diesel engine rebuilding and repair applications.
|
$ 7,919.96
-
+
| ||
|
1-2 weeks delivery time The Bukh 033D0405 cylinder head is a critical top-end engine component for BUKH DV36 and DV48 marine diesel engines, forming the upper sealing surface of the combustion chamber and supporting correct gas flow through the head. Built for OEM fit, it helps restore dependable compression, stable combustion, and reliable engine operation when renewing the cylinder head assembly.
|
$ 12,800.14
-
+
| ||
|
1-2 weeks delivery time The Bukh 033D1202 thermostat is a temperature-regulating component for the two-circuit cooling system on BUKH DV36 and DV48 marine diesel engines. It helps the engine reach operating temperature promptly and then maintains controlled coolant flow through the cooling circuit to support stable running temperature and dependable performance underway.
|
$ 714.50
-
+
| ||
|
1-2 weeks delivery time The Bukh 033D1801 circulation pump repair kit is designed to restore dependable coolant flow on BUKH DV36 and DV48 marine diesel engines. Built for service work on the engine’s circulation pump, this kit supports stable operating temperature by helping keep the closed-loop cooling system performing as intended.
|
$ 946.04
-
+
| ||
|
1-2 weeks delivery time The Bukh 033D1802 impeller pump repair kit is a service set for restoring reliable seawater circulation on BUKH DV36 and DV48 marine diesel engines. Designed for impeller pump maintenance, it supports dependable cooling-water flow and helps keep the engine’s raw-water cooling system performing as intended.
|
$ 510.73
-
+
| ||
|
1-2 weeks delivery time The Bukh start pilot is designed for DV36 and DV48 marine diesel engine starting support applications.
|
$ 1,993.66
-
+
| ||
|
1-2 weeks delivery time The Bukh spray pump is designed for marine auxiliary fluid circulation applications.
|
$ 9,967.56
-
+
| ||
|
1-2 weeks delivery time The Bukh spray pump is designed for marine engine auxiliary fluid system applications.
|
$ 11,436.97
-
+
| ||
|
1-2 weeks delivery time The Bukh SOLAS tools and spares kit is designed for DV36 and DV48 RME marine engine service applications.
|
$ 511.57
-
+
| ||
|
1-2 weeks delivery time The Bukh 033D4203 cylinder head gasket set is a complete sealing set for the cylinder head joint on BUKH DV36 and DV48 marine diesel engines. Designed for service and overhaul work, it helps restore a tight seal between the cylinder head and engine block to maintain proper compression and keep coolant and oil passages securely separated.
|
$ 713.97
-
+
| ||
|
1-2 weeks delivery time The Bukh 033D5009 gearbox conversion set upgrades the transmission installation on BUKH DV36 marine diesel engines as an alternative solution where a BW7 3:1 setup is defective. Supplied as a complete kit with a PRM150/3R gearbox including coupling, plus an adapter plate, oil cooler, and oil hoses, it streamlines repowering of the driveline for pleasure craft applications.
|
$ 9,224.53
-
+
| ||
|
1-2 weeks delivery time The Bukh 033D5014 PRM125A reduction gear kit with a 2.5:1 ratio is built to match Bukh 2-cylinder and 3-cylinder marine engine installations. Supplied as a complete kit, it supports correct propulsion gearing by reducing engine speed to the drivetrain for smooth, controlled power delivery.
|
$ 6,839.98
-
+
| ||
|
1-2 weeks delivery time The Bukh 033D7312 flywheel is a precision engine rotating-mass component for BUKH DV36 and DV48 marine diesel engines. Designed to smooth crankshaft speed fluctuations and provide stable inertia for starting and low-speed operation, it supports reliable power delivery and correct drivetrain engagement in the flywheel section of the engine.
|
$ 1,748.01
-
+
| ||
|
1-2 weeks delivery time The Bukh 033D8101 propeller shaft (30x1500mm) is a precision drive-line component used to transmit torque from the gearbox to the propeller in marine propulsion systems. Built for dependable power transfer and smooth running, it is a strong choice for refits and replacements where correct shaft sizing and reliable drivetrain alignment matter.
|
$ 1,475.10
-
+
| ||
|
1-2 weeks delivery time The Bukh 500 mm intermediate pipe is designed for marine engine installation and connection applications.
|
$ 865.71
-
+
| ||
What types of filters are included in the BUKH diesel engine parts range for marine applications?
The BUKH diesel engine parts range for marine applications includes both fuel and oil filters designed to maintain optimal performance and longevity. These filters are essential for protecting the engine from contaminants and ensuring smooth operation in various marine environments. Available for models such as the BUKH DV10, they meet high-quality standards to suit both small and large vessels worldwide.
How does the BUKH anode contribute to protecting marine diesel engines from corrosion?
The BUKH anode plays a crucial role in protecting marine diesel engines from corrosion by acting as a sacrificial component. It helps to prevent the buildup of harmful electrolysis that can damage key engine parts, such as the fuel pump and water pump. Regularly replacing the anode ensures the longevity and efficiency of the engine, maintaining optimal performance for both small and large marine applications.
What maintenance is required for the fuel pump in a BUKH engine?
Regular maintenance for the fuel pump in a BUKH marine engine includes checking and replacing fuel filters to ensure clean fuel flow. It's also important to inspect the pump for any signs of wear or damage, following the manufacturer's manual.