BUKH Diesel Engine Parts are essential components for the efficient operation of marine diesel engines like the DV20, DV24, DV36, and DV48. These genuine spare parts, including fuel and oil filters, water pumps, and other engine spares, are designed to ensure optimal performance and reliability. BUKH engines are widely used in boats and maritime applications, offering high-quality solutions for maintenance, cooling, and power generation, supported by the manufacturer's technical data.
|
1-2 weeks delivery time The Bukh 030D5021 transmission conversion kit upgrades 2-cylinder BUKH installations by converting from the older BW7 gearbox to the newer PRM125A with a 2.5:1 ratio. Designed to support a clean drivetrain modernization, it provides a practical path to a current gearbox setup while accounting for the changed installation position, including the requirement to mount the engine 10 mm higher as referenced in Bukh technical information si1703_2.
|
$ 6,839.98
-
+
| ||
|
1-2 weeks delivery time The Bukh 030D6508 keel cooling pipe is a 1574mm cooling line designed for marine keel cooling systems. Built for dependable coolant circulation through the keel cooler circuit, it supports stable engine operating temperatures and is well-suited for replacement during cooling-system service or refits.
|
$ 1,890.17
-
+
| ||
|
1-2 weeks delivery time The Bukh 030D6510 keel cooling pipe is a dedicated cooling-system line for BUKH EPA 28 marine diesel engines, used to route coolant through the keel-cooling circuit for steady temperature control under continuous load. Supplied in a 1270 mm length, this pipe supports a clean, engine-matched installation and is intended to be ordered together with a new engine.
|
$ 1,525.43
-
+
| ||
|
1-2 weeks delivery time The Bukh U-type keel cooling pipe is intended for marine engine keel cooling system applications.
|
$ 2,296.78
-
+
| ||
|
1-2 weeks delivery time The Bukh 030D6514 keel cooling pipe assembly (1150 mm) is designed for the keel-cooling circuit on BUKH EPA 28 and EPA 36 marine engines, providing a dedicated coolant flow path for stable temperature control during continuous operation. This item is supplied only when ordered with a new engine; for separate supply, use the spare parts price list selection.
|
$ 2,531.63
-
+
| ||
|
1-2 weeks delivery time The Bukh U-type keel cooling pipe is intended for marine engine keel cooling system applications.
|
$ 1,887.35
-
+
| ||
|
1-2 weeks delivery time The Bukh 030D6518 keel-cooling pipe assembly is a dedicated cooling-system line for BUKH EPA 28, EPA 36, and EPA 48 marine diesel engines. With a 955 mm length, it supports the keel-cooling circuit by routing coolant through the system for stable operating temperatures and dependable heat management on board.
|
$ 2,035.15
-
+
| ||
|
1-2 weeks delivery time The Bukh 030D6560 two-circuit circulation pump is a cooling-system pump designed for BUKH DV36 marine diesel engines, helping keep coolant moving through a dual-circuit setup for stable operating temperature control. Supplied as a direct replacement for the earlier part number 008E6560, it supports dependable cooling performance for marine duty.
|
$ 3,394.38
-
+
| ||
|
1-2 weeks delivery time The Bukh automatic stern tube lubrication system is intended for marine stern tube maintenance applications.
|
$ 137.99
-
+
| ||
|
1-2 weeks delivery time The Bukh cooling water pump is intended for marine diesel engine cooling system applications.
|
$ 1,315.10
-
+
| ||
|
1-2 weeks delivery time The Bukh painted double starter bracket is designed for marine engine starter mounting applications.
|
$ 3,581.59
-
+
| ||
|
1-2 weeks delivery time The Bukh 031D4202 cylinder head gasket set is designed for BUKH DV10ME marine diesel engines, supporting a secure seal between the cylinder head and engine block. Used during cylinder head service, this set helps maintain proper compression and keeps combustion gases, coolant, and lubricating oil separated for dependable engine operation.
|
$ 372.82
-
+
| ||
|
1-2 weeks delivery time The Bukh 032D1308 lubricating oil heater is a 42 V, 85 W heating element designed for the lubrication system on BUKH DV24 and DV29 marine diesel engines. By warming the lubricating oil, it supports smoother starts and more consistent oil flow during cold conditions, helping protect critical engine components from start-up wear.
|
$ 4,598.76
-
+
| ||
|
1-2 weeks delivery time The Bukh 032D1310 lubricating oil heater is a 42V, 85W heating element for BUKH DV32 marine diesel engines, designed to warm the lubrication oil for easier starting and smoother operation in cold conditions. Installed in the lubricating oil system, it helps reduce start-up wear by promoting faster oil flow and more consistent lubrication during preheat and initial running.
|
$ 4,790.41
-
+
| ||
|
1-2 weeks delivery time The Bukh 032D1402 complete return line kit restores a clean, leak-resistant return circuit on BUKH DV24, DV29, and DV32 marine diesel engines. Supplied as a complete set with the leak oil pipe, banjo bolts, hollow screw, nipple, and sealing gaskets, it supports correct routing and secure sealing of the return line connections during service or overhaul.
|
$ 366.29
-
+
| ||
|
1-2 weeks delivery time The Bukh 032D2213 start pilot unit is a dedicated starting-aid component for BUKH DV24 and DV32 marine diesel engines, supporting more confident cold starts and smoother engine pickup during cranking. This part replaces the earlier 022D2211 reference and is intended for installation in the engine starting system where a start pilot device is used.
|
$ 1,777.55
-
+
| ||
|
1-2 weeks delivery time The Bukh 032D2214 Start Pilot unit is a dedicated starting aid for BUKH DV29 marine diesel engines, supporting quicker, more reliable engine starts when conditions are difficult. Integrated into the engine starting system, it helps the engine light off smoothly and reduces strain on the starter and batteries during repeated start attempts.
|
$ 1,777.55
-
+
| ||
|
1-2 weeks delivery time The Bukh 032D4216 cylinder head gasket set is a sealing kit for the cylinder head joint on BUKH DV24 and DV32 marine diesel engines. Designed to restore a tight, reliable seal during service work, it helps maintain proper compression and keeps coolant and oil circuits separated for stable engine operation.
|
$ 531.28
-
+
| ||
|
1-2 weeks delivery time The Bukh front power take-off is intended for marine auxiliary drive and PTO applications.
|
$ 169.15
-
+
| ||
|
1-2 weeks delivery time The Bukh automatic Hydrostart system is designed for hydraulic starting of DV24, DV29, and DV32 marine diesel engines.
|
$ 57,668.42
-
+
| ||
What types of filters are included in the BUKH diesel engine parts range for marine applications?
The BUKH diesel engine parts range for marine applications includes both fuel and oil filters designed to maintain optimal performance and longevity. These filters are essential for protecting the engine from contaminants and ensuring smooth operation in various marine environments. Available for models such as the BUKH DV10, they meet high-quality standards to suit both small and large vessels worldwide.
How does the BUKH anode contribute to protecting marine diesel engines from corrosion?
The BUKH anode plays a crucial role in protecting marine diesel engines from corrosion by acting as a sacrificial component. It helps to prevent the buildup of harmful electrolysis that can damage key engine parts, such as the fuel pump and water pump. Regularly replacing the anode ensures the longevity and efficiency of the engine, maintaining optimal performance for both small and large marine applications.
What maintenance is required for the fuel pump in a BUKH engine?
Regular maintenance for the fuel pump in a BUKH marine engine includes checking and replacing fuel filters to ensure clean fuel flow. It's also important to inspect the pump for any signs of wear or damage, following the manufacturer's manual.