BUKH Diesel Engine Parts are essential components for the efficient operation of marine diesel engines like the DV20, DV24, DV36, and DV48. These genuine spare parts, including fuel and oil filters, water pumps, and other engine spares, are designed to ensure optimal performance and reliability. BUKH engines are widely used in boats and maritime applications, offering high-quality solutions for maintenance, cooling, and power generation, supported by the manufacturer's technical data.
|
1-2 weeks delivery time The Bukh 000E8996 gasket is a sealing element for the BUKH DV32 air inlet and turbocharger assembly, helping maintain a tight joint where intake air components connect. It supports correct airflow routing and reduces the risk of leaks that can affect turbocharger response and overall engine performance in marine operation.
|
$ 70.74
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E9160 air inlet connection piece provides a secure inlet branch connection for the BUKH DV32 air intake and turbocharger assembly. Designed to route and join intake airflow where it enters the induction system, it supports stable engine breathing and dependable turbocharger feed under marine operating conditions.
|
$ 238.04
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E9164 banjo bolt is a secure fastening component used on the BUKH DV32 air inlet and turbocharger assembly. Designed for dependable clamping of a banjo-style connection, it helps maintain a tight, service-ready joint in a high-vibration marine engine environment.
|
$ 185.14
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E9395 oil trap return pipe is a dedicated return line for the air inlet and turbocharger system on BUKH DV32 marine diesel engines. It routes separated oil from the oil trap back through the intended return path, helping keep the intake side cleaner and supporting stable turbocharger and air inlet operation.
|
$ 238.04
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E9455 push rod is a complete valve-train control element used across multiple BUKH DV-series marine diesel engines, including DV29RME, DV32, DV36, and DV48, and is also suitable for DV10M-48 applications. Operating within the camshaft and lubricating-oil assembly or the crankshaft and piston group (depending on engine model), it transmits cam motion to support accurate valve actuation; it replaces earlier part number 000E4988.
|
$ 94.24
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E9513 hose is a cooling-system line for two-circuit and keel cooling installations on BUKH DV24 and DV32 marine diesel engines. Designed as a direct replacement for part number 530Q0008, it supports secure coolant routing within the cooling circuit to help maintain stable engine operating temperatures underway.
|
$ 105.34
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E9514 keel cooling hose is a replacement hose for the keel cooling system on BUKH DV24 and DV32 marine diesel engines. Designed to route coolant through the keel cooling circuit, it helps maintain stable engine temperature and dependable operation, and it replaces part number 530Q0009.
|
$ 209.53
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E9598 bushing spacer supports correct alignment and sealing in the air inlet and turbocharger assembly on BUKH DV32 and DV48 marine diesel engines. Used as a bushing on DV32 installations and as a spacer on DV48 setups, it helps maintain stable turbocharger mounting geometry for reliable air delivery and consistent boost performance.
|
$ 113.08
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E9643 fitting is a generator bracket mounting component used in the electric start and alternator assembly on BUKH EPA28 and EPA48 marine engines. It supports secure positioning of the bracket structure to help keep the generator and charging equipment properly aligned under vibration and continuous onboard operation.
|
$ 68.33
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E9644 spacing component is a distance piece used in the electric start and alternator assembly on BUKH EPA28 and EPA48 marine engines. It helps maintain correct alignment and positioning of mounted components, supporting smooth starter engagement and reliable alternator operation in marine service.
|
$ 7.48
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E9681 air inlet gasket provides a secure seal in the air inlet and turbocharger assembly on BUKH DV32 marine diesel engines. Designed to help prevent air leaks at the joint, it supports stable airflow to the engine for consistent running and dependable turbocharging performance.
|
$ 14.63
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E9706 spacer bushing is a precision spacing component for the air inlet filter assembly on BUKH EPA28 and EPA36 marine engines. It helps position and support the air filter hardware for correct alignment and secure mounting, contributing to a stable, leak-resistant air intake installation in marine service.
|
$ 87.56
-
+
| ||
|
1-2 weeks delivery time The Bukh 000E9765 turbocharger pipe supports clean, stable airflow routing in the air inlet and turbocharger assembly on BUKH DV32 marine diesel engines. Designed as a direct-fit replacement, it helps maintain a secure air path to the turbocharger for consistent boost response and dependable engine operation.
|
$ 853.46
-
+
| ||
|
1-2 weeks delivery time The Bukh 00100-1U122 rear heat exchanger cap secures the rear end of the heat exchanger assembly on BUKH R210J marine diesel engines. It helps maintain a sealed cooling circuit for dependable heat transfer and stable operating temperature in marine service.
|
$ 431.94
-
+
| ||
|
1-2 weeks delivery time The Bukh 00100-5S101 heat exchanger unit is built for the heat exchanger system on BUKH S270J marine diesel engines, helping control operating temperature by transferring heat from the engine’s coolant circuit to the seawater side. It’s a complete heat exchanger assembly intended for dependable cooling performance and a secure, OEM-style fit in marine service.
|
$ 13,070.18
-
+
| ||
|
1-2 weeks delivery time The Bukh 00100-5S102 heat exchanger housing secures and protects the heat exchanger assembly in the cooling system of BUKH S270J marine diesel engines. Built for an OEM-correct fit, this housing supports proper coolant and seawater circuit routing while helping maintain stable engine operating temperature in marine service.
|
$ 3,035.22
-
+
| ||
|
1-2 weeks delivery time The Bukh 00100-5S104 right-hand heat exchanger housing cap is a dedicated end-cap component for the heat exchanger assembly on BUKH S270J marine diesel engines. It closes and supports the heat exchanger housing on the right-hand side, helping maintain a secure, serviceable cooling-system layout for reliable onboard temperature control.
|
$ 1,821.16
-
+
| ||
|
1-2 weeks delivery time The Bukh 00100-5S105 heat exchanger tube bundle assembly is a core cooling element for the heat exchanger on BUKH R210J and S270J marine diesel engines. Designed to restore efficient heat transfer, it supports stable operating temperatures by carrying coolant through the heat exchanger tube stack while seawater removes heat from the outside of the tubes.
|
$ 8,182.09
-
+
| ||
|
1-2 weeks delivery time The Bukh 00100-5S106 sealing O-ring (AN357) is designed for the intercooler and heat exchanger assemblies on BUKH R210J and S270J marine engines. It helps maintain a tight seal in the cooling-related assemblies, supporting stable operation by reducing the risk of leakage at service joints during routine maintenance or overhaul work.
|
$ 8.37
-
+
| ||
|
1-2 weeks delivery time The Bukh 00100-5S109 engine coolant outlet hose is built for the heat exchanger cooling circuit on BUKH S270J marine diesel engines. It routes hot coolant from the engine outlet to support stable temperature control, helping maintain dependable cooling performance in continuous marine operation.
|
$ 49.21
-
+
| ||
What types of filters are included in the BUKH diesel engine parts range for marine applications?
The BUKH diesel engine parts range for marine applications includes both fuel and oil filters designed to maintain optimal performance and longevity. These filters are essential for protecting the engine from contaminants and ensuring smooth operation in various marine environments. Available for models such as the BUKH DV10, they meet high-quality standards to suit both small and large vessels worldwide.
How does the BUKH anode contribute to protecting marine diesel engines from corrosion?
The BUKH anode plays a crucial role in protecting marine diesel engines from corrosion by acting as a sacrificial component. It helps to prevent the buildup of harmful electrolysis that can damage key engine parts, such as the fuel pump and water pump. Regularly replacing the anode ensures the longevity and efficiency of the engine, maintaining optimal performance for both small and large marine applications.
What maintenance is required for the fuel pump in a BUKH engine?
Regular maintenance for the fuel pump in a BUKH marine engine includes checking and replacing fuel filters to ensure clean fuel flow. It's also important to inspect the pump for any signs of wear or damage, following the manufacturer's manual.