-
Boat Exterior & Deck Equipment
-
Boat Mechanics & Marine Systems
-
Yacht & Boat Interior Accessories
-
Sailboat Hardware & Sailing Gear
-
Marine Comfort Systems
-
Boat Must-Haves Gear & Extras
-
Outboard Motor Accessories & Parts
-
Marine Parts & Technical Equipment
-
Boating & Yacht Equipment Brands
-
Marine Propulsion & Control Systems
-
Marine Pumps, Sanitation & Toilets
-
Marine Power & Electrical Systems
-
Marine Anchoring & Maneuvering
-
Marine Galley, Comfort & Utility Gear
-
Marine Lighting & Navigation Illumination
-
Industrial Pumps & Equipment
A boat propeller shaft, particularly for inboard systems, is a critical component designed to transmit power from the engine to the propeller, facilitating the propulsion of the boat. The propeller shaft passes through the hull via a stuffing box or seal, which prevents water entry while allowing the shaft to rotate freely. This setup is crucial for efficient boat operation, ensuring that the propeller receives the engine's power without any significant power loss, thus maintaining optimal performance and fuel efficiency in marine vessels.
1-2 weeks delivery time Price incl. 19% VAT The Hollex 1V propeller shaft seal is made of bronze.
|
€ 208,56
Type:
Diameter, mm:
|
1-2 weeks delivery time Price incl. 19% VAT Sealing of STB Seal stern pipe with water supply. It is used in water lubrication systems and has its own water source. The seal consists of a flexible bellows and a clamp. Supplied with lubrication tube. All dimensions in millimeters. The best products from Europe for your yacht, which will last a long time and ensure high-quality operation.
|
€ 114,64
Shaft diameter:
Shaft tube diameter:
|
1-2 weeks delivery time Price incl. 19% VAT This seal is used in water installations. Attachment consists of flexible bellows with clamp. Comes complete with a safety ring for the assembly and tube. The water supply is controlled on the bushing as the attachment is not powered. All dimensions in millimeters. Quality goods from Europe only for you.
|
€ 104,01
Shaft diameter:
Shaft tube diameter:
|
1-2 weeks delivery time Price incl. 19% VAT Vetus ZWBH self-aligning bearing/seal with triple seal is designed for use in shaft lines with water lubrication. It has a 10 mm water hose connector. Operating temperature from 15 ° S to + 85 ° S. It can be used with bronze, steel and GRP deadwood pipes.
|
€ 101,37
Diameter, mm:
|
1-2 weeks delivery time Price incl. 19% VAT G.R.P. deadwood pipes for shafts with diameters of 25, 30 and 35 mm. Plastic deadwood pipes are installed, formed directly into the body.
|
€ 79,29
Diameter, mm:
Length, mm:
|
1-2 weeks delivery time Price incl. 19% VAT The highest quality products for the hermetic operation of your system. A Goodrich bearing that will best serve your valolin, with which the rotation of the propeller will be the most reliable. For convenience, we have already converted the diameter to millimeters, which means that you have the choice. And also, our specialists will always tell you which one you need.
|
€ 69,44
Shaft diameter:
Shaft tube diameter:
Length, mm:
|
1-2 weeks delivery time Price incl. 19% VAT Gudrich phenol bearings from Vetus. With them, your valoline will always serve in the right way, and the propeller will always work well, ensuring its full power. We have already translated everything into millimeters for a more convenient diameter calculation. A choice with which our specialists can also help.
|
€ 68,07
Shaft diameter:
Shaft tube diameter:
|
1-2 weeks delivery time Price incl. 19% VAT Goodrich Exalto bronze bearings. A high-quality product for reliable operation of your propeller and correct design of the valolin. It will last for many years and never cause problems. We translated the diameter into millimeters for the most convenient calculation. However, our specialists are always ready to help you with your choice.
|
€ 68,53
Shaft diameter:
Shaft tube diameter:
Length, mm:
|
1-2 weeks delivery time Price incl. 19% VAT Goodrich bearing from Exalto. Bronze bushings for proper and high-quality operation of your propellers. We will always be happy to help with diameter determination. We have already translated the diameter from millimeters for your greater convenience.
|
€ 67,46
Shaft diameter:
Shaft tube diameter:
Length, mm:
|
1-2 weeks delivery time Price incl. 19% VAT Don't know how to get stuffed stuffing? Ramen makes a special device for this. Specified packing size in mm (length of square side).
|
€ 63,23
Size, mm:
|
1-2 weeks delivery time Price incl. 19% VAT Goodrich phenol bearings from Vetus, Rulag series. Rubber-metal bearing, which is used when operating mechanisms in an aqueous medium. Gudrich bushing ensures tightness and free rotation of propeller shaft. For the greatest convenience of determining the diameter, we have already translated everything into millimeters. Also, our specialists will always help with choosing the right option.
|
€ 60,51
Shaft diameter:
Shaft tube diameter:
|
1-2 weeks delivery time Price incl. 19% VAT The highest quality products for the hermetic operation of your system. A Goodrich bearing that will best serve your valolin, with which the rotation of the propeller will be the most reliable. For convenience, we have already converted the diameter to millimeters, which means that you have the choice. And also, our specialists will always tell you which one you need.
|
€ 58,84
Shaft diameter:
Shaft tube diameter:
Length, mm:
|
1-2 weeks delivery time Price incl. 19% VAT Rubber-metal bearing and mounting flange are installed in rear part of bronze stern tube.
|
€ 58,21
Diameter, mm:
|
1-2 weeks delivery time Price incl. 19% VAT Supplied for shafts from 20 mm to 100 mm in diameter. The outer case is made of phenol, the inner part is made of polyurethane. This bearing is lighter in weight, does not rust, changes easily and is ideal for aluminum vessels. On a separate request, we can put bearings on larger diameter shafts.
|
€ 55,78
Shaft diameter:
Shaft tube diameter:
|
1-2 weeks delivery time Price incl. 19% VAT Goodrich bearing from Exalto. Phenol bushings for proper and high-quality operation of your propellers. We will always be happy to help with diameter determination. We have already translated the diameter from millimeters for your greater convenience.
|
€ 54,76
Shaft diameter:
Shaft tube diameter:
Length, mm:
|
1-2 weeks delivery time Price incl. 19% VAT Set of water intake with ball valve, 1 m water hose and hose clamps
|
€ 50,13
Diameter, mm:
|
1-2 weeks delivery time Price incl. 19% VAT The highest quality products for the hermetic operation of your system. A Goodrich bearing that will best serve your valolin, with which the rotation of the propeller will be the most reliable. For convenience, we have already converted the diameter to millimeters, which means that you have the choice. And also, our specialists will always tell you which one you need.
|
€ 48,69
Shaft diameter:
Shaft tube diameter:
Length, mm:
|
1-2 weeks delivery time Price incl. 19% VAT This propeller shaft tip is equipped with a zinc anode, and it itself is made of brass. The best protection for your propeller shaft that does not give in to corrosion. It will last a very long time and will not cause any problems. The best solutions for your vessel.
|
€ 47,52
Diameter, mm:
Size, mm:
|
1-2 weeks delivery time Price incl. 19% VAT Exalto Gudrich phenol bearings. A high-quality product for reliable operation of your propeller and correct design of the valolin. It will last for many years and never cause problems. We translated the diameter into millimeters for the most convenient calculation. However, our specialists are always ready to help you with your choice.
|
€ 49,71
Shaft diameter:
Shaft tube diameter:
Length, mm:
|
1-2 weeks delivery time Price incl. 19% VAT Supplied for shafts from 20 mm to 100 mm in diameter. The outer body is made of bronze, the inner part is made of polyurethane. On a separate request, we can put bearings on larger diameter shafts.
|
€ 39,66
Shaft diameter:
Shaft tube diameter:
|
How does the material of an inboard boat propeller shaft impact its performance and longevity?
The material of an inboard boat propeller shaft significantly influences both its performance and longevity. Typically crafted from stainless steel or sometimes bronze, these materials are chosen for their strength, resistance to corrosion, and ability to withstand the harsh marine environment. Stainless steel shafts, for example, offer excellent toughness and resistance to pitting and crevice corrosion, crucial for maintaining the integrity and efficiency of the marine propeller shaft over time. The durability of these materials ensures that the shaft can handle the mechanical stresses of transmitting power from the engine to the propeller without deforming or failing, thereby providing reliable performance and reducing the need for frequent replacements.
What are the common types of bearings used with marine propeller shafts to ensure smooth operation?
Common types of bearings used with marine propeller shafts include cutlass bearings and roller bearings. Cutlass bearings, made from durable rubber and sometimes embedded with brass or other metals, are particularly favored for their ability to handle the high loads and abrasive conditions typical in the marine environment. These bearings ensure smooth operation by allowing the boat propeller shaft to rotate freely while minimizing friction and wear. Roller bearings, although less common in marine settings due to their susceptibility to corrosion, may also be used in some inboard boat propeller shaft designs where sealed units can protect against water ingress, offering efficient rotational performance and reliability.
What maintenance practices are essential for ensuring the longevity of marine propeller shafts?
Regular maintenance is crucial to ensure the longevity of marine propeller shafts. Key practices include frequent inspections for signs of wear or corrosion, particularly on inboard boat propeller shafts which are constantly exposed to marine elements. Lubrication of the shaft and its bearings is also essential to reduce friction and prevent overheating during operation. Additionally, it's important to check the alignment of the shaft periodically to ensure it has not shifted, as improper alignment can lead to uneven wear and potential damage to both the shaft and associated components, thereby maintaining optimal performance of the boat propeller shaft.