Article
YSiveco_N67_MNSM22
1-2 weeks delivery time
Price incl. 19% VAT
Price incl. 19% VAT
Our managers will contact you and clarify the terms of the order
Iveco N67 220/N67 MNSM22 220 hp/162 kW marine engine. Selection, technical calculation, certificates and equipment available on request.
- Description
- Ask a Question
-
Specifications
Thermodynamic cycle: 4-stroke diesel
Inlet: Turbocharged
Layout: 6 cylinders in a row
Diameter x Stroke: 104 x 132 mm
Engine size: 6.7 L
Valves per cylinder: 2
Compression ratio: 17.5: 1
Injection System: Bosch Mechanical High Pressure Pump
Cooling: Double Circuit System (Sea Water/Coolant)
Direction of flywheel rotation: Counterclockwise
Maximum power, depending on the mode: from 110 (150) to 162 (220) kW (HP)
At 2800 rpm
Fuel consumption at full load: 213 @ 1800 (g/kWh @ 2400)
Maximum oil consumption% of fuel consumption ≤ 0.2
Oil and filter exchange interval: 600 h
Dry weight: 605 kg
Overall dimensions (d x w x v): 1236x780x793 mm
Standard
Flywheel Crankcase: SAE 3
Flywheel size: 11.5 inches
Turbine: Liquid cooled
Air Filter: Left
Heat Exchanger: Tubular
Water tank: Included
Water Pump: Outer/Inner Loop
Fuel filter: 1-left
Fuel pre-filter: on, not fixed
Fuel Pump: On
Oil filter: 1-left
Pallet: Sheet Steel
Oil heat exchanger: Built into crankcase
Oil filling hole: On the head cover
Starter: 12V - 3kW
12V - 90A Recharge Generator
Stop device: Stop solenoid
Wiring: 12V - Motor Harness
Advanced Options
Supports: Adjustable elastic 4 pcs.
Starter: 24 B
Recharge Generator: 24V - 70 A
Fuel tubes: Dual with leakage sensor to PC/PPP requirements
APS system: For instrumentation and emergency module under PC/PPP requirements
Dual fuel/oil filters: To be replaced when the engine is running under PC/PPP requirements
Shelf: Optional for power take-off
Connecting cable for control panel: 16-core - 3, 5, 7 meters
Pyrometer: For measurement of exhaust gas temperature
Instrumentation (loose): 12-24 B
Stop solenoid: 12-24 B
Control Panel: Analog 12-24 B
Duplicate Fly-Bridge Panel: Digital 12-24 B
Gas vent: Dry with compensator, wet.
Protective grille: For protection against moving elements (belt, pulley)
Gearbox T.Drive TM880 A angle 10 °: gear ratio 1.53; 2,08
Gearbox ZF-280-1A angle 7 °: gear ratio 2.00; 2,476; 1,483
Gearbox ZF 280-1: gear ratio 2.478; 2,00; 1,514; 1,00
Gearbox ZF 280IV angle 14 °: gear ratio 2.556; 2,063; 1,561
Gearbox ZF 220 A angle 10 °: gear ratio 1.235; 1,533; 2,04
Gearbox T.Disc MG 5061SC: gear ratio 1.15; 1,48; 2,00
Gearbox T.Disc MG 5061SC angle 7 °: gear ratio 1.54; 2,00; 2,47
Gearbox T.Disc MG 5050 A angle 10 °: gear ratio 2.47; 1,50; 2,04
Protection of systems: Fuel pipes, oil.
Certification: PPP/PMPC/IMO-MARPOL/RIVR/2003/44/EC
-
Ask a Question
Popular products