Article
YSiveco_S30_ENTM23
1-2 weeks delivery time
Price incl. 19% VAT
Price incl. 19% VAT
Our managers will contact you and clarify the terms of the order
Marine engine Iveco S30 230/S30 ENTM23 230 hp/169 kW. Selection, technical calculation, certificates and equipment available on request.
- Description
- Ask a Question
-
Specifications
Thermodynamic cycle: 4-stroke diesel
Inlet: Turbocharged with intercooler
Layout: 4 cylinders in a row
Diameter x Stroke: 95.8 x 104 mm
Engine size: 2.998 L
Valves per cylinder: 4
Compression ratio: 18:01
Common Rail Injection System
Cooling: Double Circuit System (Sea Water/Coolant)
Direction of flywheel rotation: Counterclockwise
Maximum power, depending on the mode: from 85 (115) to 169 (230) kW (HP)
At 3500-4000 rpm
Maximum rpm: 3980-4280 rpm
Idle: 716±65 rpm
Piston speed: 12.1 m/s
BMEP at maximum moment: 18 kg/cm ²
Fuel consumption at full load: 260 @ 4000 (g/kWh @ 2400)
Maximum oil consumption% of fuel consumption ≤ 0.2
Oil and filter exchange interval: 600 h
Dry weight: 330 kg
Overall dimensions (d x w x c): 941x775x753 mm
Standard
Flywheel Crankcase: SAE 4
Flywheel size: 8 "
Turbine: Liquid cooled
Heat Exchanger: Tubular
Water tank: Included
Water Pump: Outer/Inner Loop
Fuel filter: 1
Fuel pre-filter: on, loose
Fuel pump: on, loose
Oil filter: 1-
Pallet: Aluminum
Oil heat exchanger: Built into crankcase
Oil filling hole: On the head cover
Starter: 12V - 2.3kW
12V - 110A Recharge Generator
Stop device: Stop solenoid
Wiring: 12V - Electrical Motor Harness
Advanced Options
Supports: Adjustable elastic
Fuel tubes: Dual with leakage sensor to PC/PPP requirements
APS system: For instrumentation and emergency module under PC/PPP requirements
Dual fuel/oil filters: To be replaced when the engine is running under PC/PPP requirements
Shelf: Optional for power take-off
Connecting cable for control panel: 47-core - 3, 5, 7,10,15 meters
Pyrometer: For measurement of exhaust gas temperature
Instrumentation (loose): 12-24 B
Stop solenoid: 12-24 B
Control Panel: Analog 12-24 B
Duplicate Fly-Bridge Panel: Digital 12-24 B
Gas vent: Dry with compensator/Wet with water injection.
Protective grille: For protection against moving elements (belt, pulley)
Gearbox T.Drive TM 545 A: gear ratio 1.51; 2.09 angle 8 °
Gearbox ZF 45 A: gear ratio 1.260; 1,510; 2,030; 2,430
Gearbox T.Drive TM 93 A: gear ratio 1.51; 2,09; 2.40 angle 8 °
Gearbox T.Drive TM 485 A: gear ratio 1.51; 2,09; 2.40 angle 8 °
Reduction gear ZF ZF 63IV: gear ratio 1.29; 1,58; 1,99.
Calorifer/heating: Heat extraction system for interior/engine room heating
Protection of systems: Fuel pipes, oil.
Certification: PPP/PMPC/IMO-MARPOL/RIVR/2003/44/EC
-
Ask a Question
Popular products