Article
YSiveco_N67_ENTM57
1-2 weeks delivery time
Price incl. 19% VAT
Price incl. 19% VAT
Our managers will contact you and clarify the terms of the order
Iveco N67 570/N67 ENTM57 570 hp/420 kW marine engine. Selection, technical calculation, certificates and equipment available on request.
- Description
- Ask a Question
-
Specifications
Thermodynamic cycle: 4-stroke diesel
Inlet: Turbocharged with intercooler
Layout: 6 cylinders in a row
Diameter x Stroke: 104 x 132 mm
Engine size: 6.7 L
Valves per cylinder: 4
Common Rail Injection System
Cooling: Double Circuit System (Sea Water/Coolant)
Direction of flywheel rotation: Counterclockwise
Maximum power, depending on the mode: from 331 (450) to 419 (570) kW (HP)
At 3000 rpm
Maximum rpm: 3150 rpm
Idle 600 rpm
Piston speed: 13.2 m/s
BMEP at maximum moment: 23.5 kg/cm ²
Full load fuel consumption: 212 (g/kWh @ 2400)
Maximum oil consumption% of fuel consumption ≤ 0.2
Oil and filter exchange interval: 300-500 h
Dry weight: 721 kg
Overall dimensions (d x w x v): 1090x780x790 mm
Standard
Flywheel Crankcase: SAE 3
Flywheel size: 11.5 inches
Turbine: Liquid cooled
Air Filter: Left
Heat Exchanger: Tubular
Water tank: Included
Water Pump: Outer/Inner Loop
Fuel filter: 1-left
Fuel pre-filter: on, not fixed
Fuel Pump: On
Oil filter: 1-right
Pallet: Aluminum
Oil heat exchanger: Built into crankcase
Oil filling hole: On the head cover
Starter: 24V - 3kW
Recharge Generator: 24 B
Stop device: Stop solenoid
Wiring: 24V - Electrical Motor Harness
Advanced Options
Supports: Adjustable elastic 4 pcs.
Starter: 24 B
Recharge Generator: 24V - 70 A
Fuel tubes: Dual with leakage sensor to PC/PPP requirements
APS system: For instrumentation and emergency module under PC/PPP requirements
Dual fuel/oil filters: To be replaced when the engine is running under PC/PPP requirements
Shelf: Optional for power take-off
Connecting cable for analog control panel: 47-core - 3, 5, 7,10,15 meters
Connecting cable for digital control panel: 12-core - 3, 5, 7,10,15 meters
Pyrometer: For measurement of exhaust gas temperature
Instrumentation (loose): 12-24 B
Stop solenoid: 12-24 B
Control Panel: Analog/Digital 12-24 B
Duplicate Fly-Bridge Panel: Analog/Digital 12-24 B
Gas vent: Dry with compensator, wet
Protective grille: For protection against moving elements (belt, pulley)
Gearbox ZF 280-1: gear ratio 1,000; 2,000; 1,514
Gear ZF 285-1A: gear ratio 1.483; 2,000
ZF 302 IV gear: 1.771 gear ratio
Calorifer/heating: Heat extraction system for interior/engine room heating
Protection of systems: Fuel pipes, oil
Certification: PPP/PMPC/IMO-MARPOL/RIVR/2003/44/EC -
Ask a Question
Popular products