Article
YSiveco_N60_ENTM48
1-2 weeks delivery time
Price incl. 19% VAT
Price incl. 19% VAT
Our managers will contact you and clarify the terms of the order
Marine engine Iveco N60 480/N60 ENTM48 480 hp/353 kW. Selection, technical calculation, certificates and equipment available on request.
- Description
- Ask a Question
-
Specifications
Thermodynamic cycle: 4-stroke diesel
Inlet: Turbocharged with intercooler
Layout: 6 cylinders in a row
Diameter x Stroke: 102 x 120 mm
Engine size: 5.9 L
Valves per cylinder: 4
Compression ratio: 17.5: 1
Common Rail Injection System
Cooling: Double Circuit System (Sea Water/Coolant)
Direction of flywheel rotation: Counterclockwise
Maximum power, depending on mode: 353 (480) kW (HP)
At 3000 rpm
Maximum rpm: 3150 rpm
Idle 600 rpm
Fuel consumption at full load: 210 @ 2000 (g/kWh @ 2400)
Maximum oil consumption% of fuel consumption ≤ 0.2
Oil and filter exchange interval: 600 h
Dry weight: 595 kg
Overall dimensions (d x w x v): 1349x843x788 mm
Standard
Flywheel Crankcase: SAE 3
Flywheel size: 11.5 inches
Turbine: Liquid cooled
Air Filter: Left
Heat Exchanger: Tubular
Water tank: Included
Water Pump: Outer/Inner Loop
Fuel filter: 1-left
Fuel pre-filter: on, not fixed
Fuel Pump: On
Oil filter: 1-right
Pallet: Aluminum
Oil heat exchanger: Built into crankcase
Oil filling hole: On the head cover
Starter: 12V - 3kW
12V - 90A Recharge Generator
Stop device: Stop solenoid
Wiring: 12V - wire bundle through motor with electronic control unit
Advanced Options
Supports: Adjustable elastic 4 pcs.
Starter: 24 B
Recharge Generator: 24V - 70 A
Fuel tubes: Dual with leakage sensor to PC/PPP requirements
APS system: For instrumentation and emergency module under PC/PPP requirements
Dual fuel/oil filters: To be replaced when the engine is running under PC/PPP requirements
Shelf: Optional for power take-off
Connecting cable for analog control panel: 47-core - 3, 5, 7,10,15 meters
Connecting cable for digital control panel: 12-core - 3, 5, 7,10,15 meters
Pyrometer: For measurement of exhaust gas temperature
Instrumentation (loose): 12-24 B
Stop solenoid: 12-24 B
Control Panel: Analog/Digital 12-24 B
Duplicate Fly-Bridge Panel: Analog/Digital 12-24 B
Gas vent: Dry with compensator, wet.
Protective grille: For protection against moving elements (belt, pulley)
Gearbox ZF 280IV angle 14 °: gear ratio 1.561; 2,063
Gearbox T.Disc MG 5061SC: gear ratio 1.15; 1,48; 2,00
Gearbox T.Disc MG 5061 A angle 7 °: gear ratio 1.54; 2,00; 1,75
Gearbox ZF-280-1A angle 7 °: gear ratio 1.483; 2,00
Gearbox ZF-280-1: gear ratio 1.006; 1,514; 2,00
Calorifer/heating: Heat extraction system for interior/engine room heating
Protection of systems: Fuel pipes, oil.
Certification: PPP/PMPC/IMO-MARPOL/RIVR/2003/44/EC
-
Ask a Question
Popular products