Article
YSiveco_N45_MNAM10
1-2 weeks delivery time
Price incl. 19% VAT
Price incl. 19% VAT
Our managers will contact you and clarify the terms of the order
Efficient marine powerplant, delivering 100 HP (74 kW) of reliable performance. With a displacement of 4.5 liters and an inline 4-cylinder configuration, this engine provides a balanced combination of power and torque, making it ideal for marine applications. Its direct injection system ensures fuel efficiency, while its naturally aspirated design adds to its reliability. Whether for commercial or recreational use, this engine offers dependable marine propulsion, making it a popular choice among boating enthusiasts and professionals
- Description
- Ask a Question
-
Specifications
Thermodynamic cycle: 4-stroke diesel
Inlet: Atmospheric
Layout: 4 cylinders in a row
Diameter x Stroke: 100 x 132 mm
Engine size: 4.5L
Valves per cylinder: 2
Injection System: Bosch Mechanical High Pressure Pump
Cooling: Double circuit system (seawater/coolant
Direction of flywheel rotation: Counterclockwise
Maximum power, depending on the mode: from 63 (85) to 74 (100) kW (HP)
At 2800 rpm
Maximum rpm: 3100 rpm
Idle: 650 rpm
Piston speed: 12.3 m/s
BMEP at maximum moment: 8.6 (7.2) kg/cm ²
Fuel consumption at full load: 230 @ 1800 (g/kWh @ 2400)
Maximum oil consumption% of fuel consumption ≤ 0.1
Oil and filter exchange interval: 600 h
Dry weight: 450 kg
Overall dimensions (DxShxV): 830x683x830 mm
Standard
Flywheel Crankcase: SAE 3
Flywheel size: 10 "
Air Filter: Left
Heat Exchanger: Tubular
Water tank: Included
Water Pump: Outer/Inner Loop
Fuel filter: 1
Fuel pre-filter: on, not fixed
Fuel Pump: On
Oil filter: 1
Oil collector: Cast iron
Oil Vapor Gas Path: Block Head Cover
Oil heat exchanger: Built into crankcase
Oil filling hole: On the head cover
Starter: 12V - 3kW
12V - 90A Recharge Generator
Stop device: Stop solenoid
Wiring: 12V - cable harness on motor
Advanced Options
Supports: Adjustable elastic 4 pcs.
Starter: 24 B
Recharge Generator: 24V - 70 A
Fuel tubes: Dual with leakage sensor to PC/PPP requirements
APS system: For instrumentation and emergency module under PC/PPP requirements
Dual fuel/oil filters: To be replaced when the engine is running under PC/PPP requirements
Shelf: Optional for power take-off
Connecting cable for control panel: 16-core - 3, 5, 7 meters
Pyrometer: For measurement of exhaust gas temperature
Instrumentation (loose): 12-24 B
Stop solenoid: 12-24 B
Control Panel: Analog 12-24 B
Duplicate Fly-Bridge Panel: Digital 12-24 B
Gasovykhlop: Dry with compensator, wet.
Protective grille: For protection against moving elements (belt, pulley)
Gearbox T.Drive TM345A angle 8 °: gear ratio 1.54
Gearbox T.Drive TM 93 A: gear ratio 1.51; 2,09; 2,40; angle 8 °
Gearbox T.Drive TM 93: gear ratio 1.51; 2,09; 2,40; 2,77
Calorifer/heating: Heat extraction system for interior/engine room heating
Protection of systems: Fuel pipes, oil.
Certification: PPP/PMPC/IMO-MARPOL/RIVR/2003/44/EC -
Ask a Question
Popular products