MG Duff CM61N4525101Z Yamaha 8 / 9.9 / 13 / 25 / 60 HP Zinc Trim Tab Anode 80 mm

MG Duff CM61N4525101Z Yamaha 8 / 9.9 / 13 / 25 / 60 HP Zinc Trim Tab Anode 80 mm

The MG Duff CM61N4525101Z is a zinc sacrificial trim tab anode designed for compatible Yamaha 8, 9.9, 13, 25 and 60 HP outboard motors. Additional listed applications include selected Parsun, ALLPASS, Hidea, Tiger, Painier and ShenFeng outboard engines.

Manufactured from zinc, this trim tab anode is intended for saltwater marine applications. It provides sacrificial galvanic corrosion protection for electrically connected underwater metallic components of compatible outboard propulsion systems.

The CM61N4525101Z measures 80 mm in body length, 59 mm in width and 26 mm in height. It features one fixing hole, a specified 5 mm stud size and weighs 0.26 kg (260 g).

Technical Specifications

Yamaha Outboard Compatibility

The MG Duff CM61N4525101Z is listed for compatible Yamaha outboard motors with the following power ratings:

• Yamaha 8 HP
• Yamaha 9.9 HP
• Yamaha 13 HP
• Yamaha 25 HP
• Yamaha 60 HP

The product information also identifies additional applications for the following outboard manufacturers:

• Parsun
• ALLPASS
• Hidea
• Tiger
• Painier
• ShenFeng

Specific engine model numbers, production years and original equipment part numbers have not been provided for these applications.

Engine horsepower alone does not guarantee fitment. Confirm the original trim tab configuration and mounting dimensions before ordering.

Trim Tab Anode Dimensions and Mounting

The CM61N4525101Z features a sacrificial zinc trim tab body with the following measurements:

• Anode body length: 80 mm
• Width: 59 mm
• Height: 26 mm
• Number of fixing holes: 1
• Stud size: 5 mm
• Weight: 0.26 kg

The specified 5 mm stud size is a mounting dimension. A separate thread pitch has not been supplied.

Before installation, compare the replacement with the original trim tab, including its body shape, fixing-hole position and mounting hardware.

Zinc Sacrificial Corrosion Protection

The MG Duff CM61N4525101Z is manufactured from zinc, a sacrificial anode material commonly used for galvanic corrosion protection in saltwater marine environments.

When correctly installed with suitable electrical continuity to the metallic components requiring protection, the zinc corrodes preferentially, helping reduce galvanic corrosion of electrically connected underwater outboard components.

Select the appropriate anode material according to the vessel's operating water conditions and the outboard manufacturer's maintenance recommendations.

Inspection and Replacement

Inspect the trim tab anode periodically during routine outboard maintenance. Replace it when the zinc becomes significantly depleted, damaged or no longer securely attached.

Before fitting a replacement:

• Confirm the outboard manufacturer and engine model.
• Compare the anode shape with the original component.
• Verify the 80 × 59 × 26 mm body dimensions.
• Check the single fixing-hole arrangement.
• Confirm the specified 5 mm stud size.
• Follow the applicable outboard manufacturer's installation instructions.

Part Number and Product Identification

• MG Duff Part Number: CM61N4525101Z
• Material: Zinc
• Primary Application: Yamaha 8 / 9.9 / 13 / 25 / 60 HP
• Additional Listed Brands: Parsun, ALLPASS, Hidea, Tiger, Painier, ShenFeng
• Dimensions: 80 × 59 × 26 mm
• Stud Size: 5 mm
• Fixing Holes: 1
• Weight: 0.26 kg

Scope of Supply

1 × MG Duff CM61N4525101Z Yamaha Zinc Trim Tab Anode.

Mounting hardware inclusion is not confirmed in the supplied product specifications.