Polipodio 433580 / 5007089 OMC Johnson Evinrude 60–300 HP Transom Bar Anode

Polipodio 433580 / 5007089 OMC Johnson Evinrude 60–300 HP Transom Bar Anode – Zinc / Aluminium

The Polipodio OM018A and OM018AAL are sacrificial bar anodes designed for compatible O.M.C., Johnson and Evinrude outboard motors rated from 60 to 300 HP.

According to the manufacturer's catalogue, the anodes correspond to original replacement references 433580 and 5007089. They are available in two sacrificial materials: zinc (Polipodio OM018A) and aluminium (Polipodio OM018AAL).

The anode has an elongated bar configuration with recessed mounting positions at both ends. The supplied dimensional drawing identifies a 172 mm longitudinal measurement, a 23 mm end-view width and a 35 mm sectional height.

Both variants provide sacrificial galvanic corrosion protection for electrically connected metallic components exposed to water in compatible outboard propulsion systems.

Technical Specifications

Available Material Variants

Both variants are listed with original references 433580 and 5007089. Select the sacrificial material according to the vessel's operating water conditions and the outboard manufacturer's recommendations.

OMC, Johnson and Evinrude Compatibility

The Polipodio bar anode is listed for compatible O.M.C., Johnson and Evinrude outboard motors from 60 to 300 HP.

• O.M.C.: Compatible 60–300 HP outboard applications
• Johnson: Compatible applications requiring this bar anode configuration
• Evinrude: Compatible applications requiring this bar anode configuration

Original replacement references:

• 433580
• 5007089

Specific engine models, production years and serial number ranges have not been supplied. The stated horsepower range does not imply universal compatibility with every outboard engine of that power rating.

Verify the original equipment part number and mounting geometry before ordering.

Transom Bar Dimensions and Mounting

The Polipodio OM018A / OM018AAL features an elongated sacrificial bar with mounting positions at both ends.

The manufacturer's drawing provides the following measurements:

• Longitudinal dimension: 172 mm
• End-view width: 23 mm
• Sectional height: 35 mm
• Mounting arrangement: Recessed fixing positions at both ends

The 172 mm dimension is shown along the main bar profile. The available drawing does not establish whether this measurement represents the complete overall length or a mounting-related dimension.

The fixing-hole diameters and complete fastening specifications have not been provided. Confirm the original mounting geometry before installation.

Zinc and Aluminium Sacrificial Corrosion Protection

The Polipodio bar anode is available in two sacrificial materials:

• Zinc – Polipodio OM018A: Commonly used for galvanic corrosion protection in suitable saltwater marine environments.
• Aluminium – Polipodio OM018AAL: Used in suitable saltwater and certain brackish-water corrosion protection systems.

When correctly installed with suitable electrical continuity to the metallic components requiring protection, the sacrificial anode material corrodes preferentially, helping reduce galvanic corrosion of electrically connected underwater components.

Select the appropriate material according to operating water conditions and the engine manufacturer's maintenance recommendations.

Polipodio and Trem Cross-References

The supplied catalogue information identifies the following related references:

Trem Article Numbers and EAN

The Trem listings identify original replacement reference 5007089. Their EANs apply specifically to the corresponding Trem articles.

The Polipodio aluminium catalogue listing additionally provides EAN 8059617813543 for article 2626221A.

The available information associates these articles through their replacement references. Exact packaging and complete dimensional interchangeability between all listings should be verified where necessary.

Inspection and Replacement

Inspect the transom bar anode periodically during routine outboard maintenance. Replace it when the sacrificial material becomes significantly depleted, physically damaged or no longer securely mounted.

Before fitting a replacement:

• Confirm the O.M.C., Johnson or Evinrude engine model.
• Check original replacement reference 433580 or 5007089.
• Compare the elongated bar profile with the original anode.
• Verify the mounting positions and fastening arrangement.
• Check the manufacturer's specified dimensional measurements.
• Follow the applicable outboard manufacturer's installation instructions.

Scope of Supply

1 × Polipodio O.M.C. / Johnson / Evinrude Transom Bar Anode in the selected material:

• Polipodio OM018A – Zinc; or
• Polipodio OM018AAL – Aluminium.