ID
1259068
$ 218.61
1-2 weeks delivery time
-
+
The Rule 27SA fully automatic submersible bilge pump is a 12V DC unit for small boats that delivers up to 4140 LPH (up to 69 L/min without check valve). It features a built-in sensor switch, thermal cut-off, quick-release/quick-clean inlet strainer, and an included check valve to help prevent backflow. The pump draws 3.7 amps (6 amp fuse), supports a max recommended discharge head of 2 m, fits 25 mm (1 inch) and 28 mm (1 1/8 inch) hoses, and measures 120 mm high x 64 mm wide x 74 mm deep.
- Description
- Ask a Question
-
Rule 27SA Fully Automatic Submersible Bilge Pump
The Rule 27SA is a compact, fully automatic submersible bilge pump designed to remove water from the bilge on smaller vessels. With an integrated sensor switch, it operates without a separate float switch and includes built-in protection features to support reliable operation and straightforward maintenance.
Features
- Fully automatic operation with built-in sensor switch (no separate float switch required)
- Manual override via third wire
- Built-in thermal cut-off for motor protection
- Quick-release inlet strainer for fast cleaning
- Includes check valve to help prevent backflow
- Vented body to reduce the risk of air lock
- Threaded port for easier installation and maintenance
- Low amp draw to conserve battery power
- Tough plastic housing for durability
- Base fits old screw hole locations but is not interchangeable
Technical Specifications
Brand Rule Supplier Code 27SA Order Number 00304430 Barcode 042237104809 Voltage 12 Volts Yield 4140 litres per hour Output Up to 69 litres/minute (15 gallons/minute) without check valve Max Recommended Discharge Head 2 meters Current Draw 3.7 amps Fuse Size 6 amp Connections Fits 25 mm (1 inch) and 28 mm (1 1/8 inch) hose Dimensions 120 mm high, 64 mm wide, 74 mm deep Motor Life Rating 1500-hour motor life rating Material / Housing Tough plastic housing Thermal Protection Built-in thermal cut-off Check Valve Included Packaged Dimensions 18.00 x 9.00 x 17.00 cm Actual Weight 0.41 kg (approx. 0.61 kg packed) Shipping Weight 0.80 kg Operating Temperature Range -20 C to 60 C (-4 F to 140 F) Max Operating Pressure 0.2 bar (2.9 psi)
Product Details
This pump is intended for bilge water removal in marine environments on smaller vessels such as boats and yachts. It is designed for automatic activation when water is detected and supports easier servicing through its quick-release strainer and threaded port.
-
Popular products
