|
1-2 weeks delivery time The VDO B00006301 ViewLine digital hour counter and voltmeter is a panel-mounted instrument designed to track operating hours and monitor system voltage across 9V to 48V electrical systems. Built in a 52 mm format with a clean white face and a double-lens design for clear readability, it suits modern instrument panels where reliable electrical monitoring and a minimalist, bezel-free look are preferred.
|
$ 46.12
-
+
| ||
|
1-2 weeks delivery time The VDO B00006302 ViewLine digital hour counter and voltmeter is a 52 mm round, white-bezel instrument built for dependable engine-hour tracking and battery voltage monitoring on 9–48 V electrical systems. Designed for engine monitoring and maintenance planning, its LCD automatically alternates between hours and battery condition every 10 seconds, while the double anti-fog lens and robust ingress protection support long-term reliability in demanding installations.
|
$ 56.07
-
+
| ||
|
1-2 weeks delivery time The VDO ViewLine digital hour counter and voltmeter instrument (B00006303) combines run-time tracking with voltage monitoring for engine monitoring and general electrical-system supervision on 9–48 V DC installations. Built around a 52 mm mounting size with a distinctive white triangular bezel and double anti-fog plastic lens, it delivers clear digital readouts, amber LED dial illumination, and reliable analog operation with a positive feed via the ignition switch—ideal for planning maintenance intervals and confirming charging-system stability.
|
$ 56.07
-
+
| ||
|
1-2 weeks delivery time The VDO B00013402 ViewLine-to-WWG adapter cable provides a straightforward, plug-and-play connection between ViewLine devices and WWG 4-pin systems. Built for reliable performance and long service life, this cable supports clean integration within your instrumentation wiring setup, helping ensure dependable signal and power connectivity where a WWG 4-pin interface is required.
|
$ 79.25
-
+
| ||
|
1-2 weeks delivery time The VDO ViewLine white warning meter B00015501 is a marine dashboard warning instrument designed to deliver clear, at-a-glance alert indication on 8–16 V electrical systems. With a high-visibility white dial and a black flat bezel, it supports confident monitoring at the helm by making warning status easy to recognize in a wide range of lighting conditions.
|
$ 124.53
-
+
| ||
|
1-2 weeks delivery time The VDO B00028501 carbon mast unit is a lightweight, high-strength mast-mounted component designed for dependable operation on sailboats with AquaLink 7-inch displays. Built to support accurate, real-time data transmission in changing marine conditions, it provides a durable, weather-resistant solution for sailors who want consistent onboard instrument performance and a clean, integrated installation.
|
$ 943.37
-
+
| ||
|
1-2 weeks delivery time The VDO B00033101 mast-mounted triple display unit is a marine instrumentation mounting and interface solution built for AquaLink 7-inch TFT setups, providing a touch-controlled view of up to 16 onboard data points such as wind speed, depth, and battery voltage. Designed for space-efficient mast installation in landscape format, it supports NMEA 2000 networking, offers automatic AquaLink NavBox detection for self-configuration, and delivers robust water-resistant protection for dependable operation on deck.
|
$ 6,420.07
-
+
| ||
|
1-2 weeks delivery time The Veratron GO GNSS GPS receiver VDO B00034901 is a compact 52 mm navigation sensor designed to deliver precise position and speed-over-ground data for marine or vehicle installations on an NMEA 2000 network. With multi-constellation GNSS support (GPS, Glonass, Galileo), a high-performance 72-channel receiver and 10 Hz update rate, it helps keep chartplotters, instruments, and onboard systems fed with stable, accurate location tracking in a clean white finish.
|
$ 233.40
-
+
| ||
|
1-2 weeks delivery time The VDO B00041201 NMEA 2000 capacitive liquid level sensor is a marine tank-level monitoring device designed for adjustable tank depths from 80 mm to 600 mm, delivering full-range linear level data over NMEA 2000. Certified for potable water and able to switch between fresh and waste water use, it supports accurate level readings for informed top-up or emptying decisions across up to 4 tanks. With a plug-and-play Micro-C M12 5-pin connector, IPX9K protection, and a service-friendly assembly concept for easier cleaning, it is built for reliable networked monitoring on 6–24 V DC systems.
|
$ 395.08
-
+
| ||
|
1-2 weeks delivery time The VDO B00041401 NMEA 2000 capacitive liquid level sensor provides accurate, full-range tank level reporting for depths adjustable from 600 mm to 1200 mm, making it ideal for modern networked tank monitoring. Designed for fresh and waste water use with per-tank adjustment and an adjustable warning contact, it uses capacitance measurement technology for linear level data and connects plug-and-play via an integrated Micro-C M12 5-pin NMEA 2000 connector, with an IPX9K rating and UL94, CE, REACH, and RoHS compliance for dependable operation as an exposed device.
|
$ 592.62
-
+
| ||
|
1-2 weeks delivery time The VDO B00041501 marine NMEA 2000 liquid level sensor is a capacitive tank sender designed for precise, full-range linear level monitoring in tank depths from 1200 to 1500 mm. Certified for potable water and switchable between fresh and waste water, it connects directly to the NMEA 2000 backbone via an integrated Micro-C M12 5-pin connector for true plug-and-play installation and reliable tank management data on networked displays.
|
$ 757.24
-
+
| ||
|
1-2 weeks delivery time The VDO B00041601 Veratron GO DATA gateway is a 12V marine interface that bridges NMEA 2000 network data to Bluetooth, helping you view key onboard information in real time. Designed for vessel monitoring and navigation support, it connects engine parameters, fuel level data, and battery voltage from the NMEA 2000 backbone to compatible Bluetooth 5.1 devices through a compact, easy-to-install, NMEA 2000 certified solution.
|
$ 191.51
-
+
| ||
|
1-2 weeks delivery time The Veratron GO Plus+ GPS receiver VDO B00041701 is a high-performance GNSS positioning device built for marine navigation and NMEA 2000 instrument networks, delivering precise GPS data and vessel information where you need it. With NMEA 2000 certification and an integrated NMEA 2000 to Bluetooth 5.1 Low Energy gateway, it supports an interconnected onboard system and wireless viewing on compatible smart devices, including speed over ground data for confident route planning.
|
$ 339.17
-
+
| ||
|
1-2 weeks delivery time The VDO B00042201 LinkUp gateway module converts resistive analog sensor signals into NMEA 2000 data, bringing traditional marine senders and gauges onto a modern onboard network with real-time integration. Designed for plug-and-play installation and wireless configuration via an app, it supports customizable sensor curves, allows alarms to be set and transmitted over NMEA 2000, and is approved for installation in engine compartments to keep your vessel’s instrumentation connected and reliable.
|
$ 164.62
-
+
| ||
|
1-2 weeks delivery time The VDO B00042301 Veratron LinkUp pyrometer kit is a complete exhaust gas temperature monitoring solution that helps you track critical thermal conditions for smarter maintenance and performance tuning. Supplied with Sensor N03-320-264, it delivers accurate real-time exhaust temperature readings and is designed for straightforward installation, making it a practical upgrade for automotive enthusiasts and professional workshops alike.
|
$ 444.46
-
+
| ||
|
1-2 weeks delivery time The VDO B00042401 Veratron LinkUp gateway bridges SAE J1939 CAN bus data to an NMEA 2000 network, translating engine and system information so it can be viewed on compatible marine displays for unified monitoring and control. Built for marine integration with a durable, easy-to-install design, it supports wireless configuration via smartphone using the LinkUp Configurator App and helps streamline onboard data exchange across different communication protocols.
|
$ 197.54
-
+
| ||
|
1-2 weeks delivery time The VDO LinkUp intelligent battery sensor kit B00042501 is a 12V battery monitoring solution that integrates into the vehicle electrical system to deliver real-time battery health and status data. Supplied as a kit with Sensor B00043901, it supports informed maintenance decisions, helps prevent unexpected no-start situations, and improves overall power management with accurate, dependable monitoring.
|
$ 329.24
-
+
| ||
|
1-2 weeks delivery time The VDO B00042502 LinkUp intelligent battery sensor gateway supports advanced battery management on 12V electrical systems up to 500Ah, delivering real-time visibility into battery status and health. Designed to integrate with the vehicle’s electrical system, it provides accurate monitoring data that helps plan proactive maintenance, reduce unexpected battery-related downtime, and support reliable starting and stable onboard power.
|
$ 367.21
-
+
| ||
|
1-2 weeks delivery time The VDO ViewLine VL Flex 52 multifunction instrument (B00043501) is a compact, programmable 52 mm gauge designed for marine and industrial monitoring, with a crisp 1.44 inch black display and bright white LED backlighting for fast readability. Built for Veratron engine monitoring systems, it supports multiple analog input types (0-5 V, 0-1000 Ohm, frequency) and uses NFC wireless programming to simplify configuration, while its anti-fog lens and IP67-rated front protection help it stay clear and dependable in harsh onboard environments.
|
$ 172.92
-
+
| ||
|
1-2 weeks delivery time The Veratron LinkUp intelligent battery sensor (VDO B00043901) upgrades 12V vehicle electrical systems by reporting real-time battery voltage, current, and temperature for smarter power management. Designed for a compact, easy installation, it helps you monitor battery health more precisely, reduce the risk of unexpected battery issues, and support efficient energy use for longer battery service life.
|
$ 167.88
-
+
| ||
What types of VDO Instruments And Parts do you have in your catalog?
VDO Gauges, VDO Oil Pressure Gauges, VDO Fuel Gauges, VDO Boost Gauges, VDO Temperature Gauges, , VDO Tachometers, VDO Volt Gauges, VDO Gas Gauges, VDO Speedometers, VDO Oil Pressure Senders, VDO Fuel Sending Units, VDO TPMS Sensors