Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time Price incl. 19% VAT Gulper 220 - This universal pump can be used in several applications: bilge pump and drainage pump in the water supply system. Different modifications allow you to choose the appropriate model for each of the options. This nanos eliminates the risk of clogging. It can work dry, for verification, but not with closed valves. Performance: up to 14 litres per minute. It can also be mounted horizontally and vertically. Separately, you can purchase a set of neoprene gaskets for it.
|
Type:
Voltage:
|
|
1-2 weeks delivery time Price incl. 19% VAT Gulper 320 Bilge Pump. The pump head can rotate 360 degrees for easy installation. Suitable for 19mm and 25mm hose. Self-suction principle of operation and can work dry, for verification. Complies with ISO 15083 standard, the motor is protected from moisture ISO08849. CE marking. Various modifications can be selected for 12V and 24V systems, as well as an additional set of neoprene gaskets can be ordered.
|
Type:
Voltage:
|
|
1-2 weeks delivery time Price incl. 19% VAT Membrane pump for fume systems on board WHALE GULPER BP2552/BP2554. Suitable for tanks, toilets or vacuum systems. It can work dry for inspection, but not with the valves closed. It is installed horizontally and vertically. The pump head may be rotated to provide the most favorable connection. Brass driving gear. Quiet work. A selection of 12 and 24 volt models is possible. Throughput from 17.5 to 19 liters per minute.
|
Voltage:
|
|
1-2 weeks delivery time Price incl. 19% VAT Gulper IC pump with the option to select the built-in switch sensor for 12 B/24V. After the water is drained, the pump operates for another 15 seconds until complete drainage. The suction lines are defined by the check valve. The filter has a hose connection of 19 mm. The sensors only work in combination with the Gulper IC pump. The best products for your yacht.
|
Voltage:
|
|
1-2 weeks delivery time Price incl. 19% VAT Built-in Gulper IC automatic pump sensor in a 2-band system on the 12V/24V. Great for catchment, sink and shower. No storage tank is required anymore. The sensors only work in combination with the Gulper IC pump. It is possible to select different modifications for different purposes and type of pump itself. Consult one of our specialists.
|
Diameter, mm:
Length, m:
|
|
1-2 weeks delivery time Price incl. 19% VAT Gulper IC Smart Pump Monitoring Sensor. This device comes in two variations: with a cable of 2 and 4 meters. Performs sensor control of the pump, turns it on and off. An ideal device so as not to worry about the correct functioning of your equipment on the ship. Now your pump will turn on at the right time. |
Length, m:
|
|
1-2 weeks delivery time Price incl. 19% VAT Discharge funnel with hose for Gulper IC pump. The choice of large or small, depending on the purpose, as well as a hose of different sizes by 2 or 4 meters. This device will create an ideal shower system, with completely autonomous operation. Consult our specialist before ordering. The best products from Europe for your yacht.
|
Length, m:
Item:
|
|
1-2 weeks delivery time Price incl. 19% VAT A 12L Whale boiler operating in the 12V system, with a capacity of 30A. It is equipped with: a magnesium anode to increase the life of the tank, a thermostat on the 300W, a pressure relief valve. The body is made of aluminum with a white epoxy coating. Supplied with all mounting brackets. Warm-up time to 60 ° C in 80 minutes, 40 ° C in 41 minutes, and heat retention lasts for 10 hours. Ideal for ships with outboard motors as it connects directly to the power supply and does not require generators, inverters or shore power. 1/2 "hose. Dimensions: 368 x 356 x 330mm, weight 15kg. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time Price incl. 19% VAT Electric pump designed for narrow holds and small rooms on the ship. A compact and productive pump that will cope with its task better than any other analogue. The output can be arranged in two different positions. Easy access for installation and maintenance. The switch for Super Sub shall be ordered separately. A selection of models is possible: 12V/19mm hose/32l.m; 12V/25.28mm hose/66l.m. and 24V/25.28mm hose/66l.m.
|
Type:
Voltage:
|
|
1-2 weeks delivery time Price incl. 19% VAT This fully automatic pump works with a built-in switch, equipped with a new electric field sensor. A specially designed model for small rooms, which is perfect for bilge water, automatically turns on and off itself. Easy and quick installation. Not susceptible to swinging the boat. Complies with ISO8849 and ISO 15083. All electronics inside are protected from water, the ABYC and USCG standard. Maximum magnification: 3 meters. Wires: not less than 1.5 mm2.
|
Type:
Voltage:
|
|
1-2 weeks delivery time Price incl. 19% VAT The Orca drainage pump is an electric submersible pump. It has a very high output and is easy to install. The body of the device is resistant to toxic liquids and fuel. It meets the Navy's ISO 8849 standard. A selection of models is possible: model 500 with a capacity of 32 l/m on 12V, model 950 with a capacity of 57 l/m on 12V, model 1300 with a capacity of 82 l/m on 12V, model 1300 with a capacity of 82 l/m on 24V.
|
Type:
Voltage:
|
|
1-2 weeks delivery time Price incl. 19% VAT Orca 1300 main drain pump with capacity of 82 l/min. Select 12V and 24V models. Fully automatic pump, works with built-in electric field sensor switch. Easy and quick installation. The pump housing is resistant to toxic liquids and fuel. The ideal option is not to worry about liquid systems on your ship, automation will do everything for you. |
Voltage:
|
|
1-2 weeks delivery time Price incl. 19% VAT These bilge pumps are provided with a large suction surface. The case is easy to open for cleaning. The switch is sold separately. Usually used as a bilge pump. It is possible to choose a model suitable for modifications: Orca 2000 for 12V and 126 l/m, Orca 2000 for 24V and 120 l/m, Orca 3000 for 12V and 189 l/m, Orca 3000 for 24V and 189 l/m. Contact our specialist, and he will gladly select a suitable model for you. |
Type:
Voltage:
|
|
1-2 weeks delivery time Price incl. 19% VAT A float switch that is ideal for use in combination with drying bilge pumps. The structure is very easy to assemble and can be mounted on horizontal and vertical surfaces. Power 15 Amperes, for 12/24V networks. In the event of a fault, the device will give an audible alarm. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time Price incl. 19% VAT Orca series submersible bilge pump circuit breaker, with patented sensor. The multi-voltage is suitable for 12 and 24 V, the maximum current is 20 A. The shutdown delay function is set. No moving parts and no problems with salt, oil or dirt on the switch. All electronics are sealed, and the case is completely waterproof. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time Price incl. 19% VAT Gray water tank equipped with Orca 500 pump, relay and filter. Easy to install, with several inlet holes. The tank has a transparent lid and is easy to open for inspection and maintenance. An ideal system that will never fail, with a timely inspection. Throughput - 32 liters per minute, connection at 12V, weight - 1.25 kg. The best products for your yacht. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time Price incl. 19% VAT Waterproof collecting tanks for gray sewage, shower, sinks, washing machine, air conditioner, etc. Suitable for 12 and 24 V systems. A choice of 8 liters or 16 liters is possible. It is equipped with a built-in circuit breaker, and an electric field sensor installed inside. You can switch to 20 A. Ease of assembly and installation. Translucent cover with neoprene ring to prevent the passing of unpleasant odors. Ideal for use with Gulper 320 or 220.
|
Type:
|
|
1-2 weeks delivery time Price incl. 19% VAT This kit is designed as follows: three independent electronic switches. The lowest switch controls the pump 1 and the switch on the medium level switches controls the pump 2. Pump 2 operates only with waste water. The third pre-alarm switch, it is triggered when the overall level in the tank becomes too high. This system can handle all waste on the ship. Dimensions: 530x240x830 mm. |
Our managers will contact you and clarify the terms of the order
|
What are the primary uses of a Whale Bilge Pump and Pressure Pumps in marine applications?
Whale bilge pumps, such as the Whale Gusher and Whale Supersub, are primarily used in marine applications to remove excess water from the bilge, ensuring the boat remains buoyant and safe. These pumps, including manual models like the Whale Gusher Titan Manual and electric options like the Whale Gulper 320 High Capacity, are essential for preventing water accumulation that can lead to instability or damage. Additionally, Whale Marine offers a range of replacement parts and pump service kits to maintain the efficiency and longevity of these vital systems, supporting various marine needs from sanitation to groundwater purging.
Whale water pumps also include specialized options like the Supersub bilge pump, Super Purger, and sanitation pumps designed for various marine applications. The Whale Quick Connect system and 12-volt automatic bilge pumps, such as the Whale Gulper Grouper MK 3, ensure reliable operation. Models like the MK 3 Manual and Whale Supersub Smart are designed for specific tasks like fishbox discharge and toilet pumping. The Whale Gusher 10 Manual and Whale Watermaster Automatic Pressure Pump are ideal for more demanding tasks, with the Gusher Galley and Titan Manual Pump making outdoor living easy and enjoyable. Whale's low voltage pumps, such as the Whale Orca, Whale Flipper, and Whale V pumps, offer versatile solutions for boats and RVs. With systems designed for easy maintenance and a wide range of applications, Whale pumps like the Gusher Galley MK 3 and electric field sensor models ensure optimal performance. Whale service kits and replacement parts, such as the Whale BP0510 MK5 Universal and AK4615 Babyfoot® Service Kit, support long-term use and reliability.
How does the Whale Foot Pump, MK3 Manual Pump and MK5 Universal Manual Pump operate in a boat's galley
The Whale foot pump operates in a boat's galley by providing a manual method to draw water from a tank to the sink, ensuring reliable water flow without the need for electricity. This type of galley pump, like the Whale Gusher urchin manual, is especially useful for boats without pressure pumps or when conserving battery power. The foot pump's simple design and durability make it an excellent choice for maintaining water and heating systems, enhancing convenience and functionality in the galley.
Additionally, the Whale foot pump's efficient design allows it to be used alongside other Whale water systems, such as the Whale Supersub bilge pump, Super Purger, and sanitation pumps, ensuring a cohesive and reliable water management system. The Whale Quick Connect system further simplifies installation and maintenance, while the low voltage and manual operation make it an energy-efficient option. With products like the Whale BP0510 MK5 Universal service kit and the Whale Gusher 10 MK3 manual bilge pump, maintaining the foot pump and other Whale systems is straightforward and hassle-free, making them ideal for both small boats and larger vessels.
What are the main applications of the Whale Gusher 10 Water Pump on boats?
The main applications of the Whale Gusher water pump on boats include bilge pumping, waste management, and freshwater transfer. The Whale Gusher pumps, such as the Gusher 10 and Gusher urchin manual bilge pumps, are highly reliable for removing water from the bilge area, ensuring the safety and stability of the vessel. Additionally, the Whale Gulper Grouper pumps are specifically designed for handling waste discharge, while the MK5 universal manual pump is versatile for various onboard water management tasks. These pumps are essential components in a pump kit for maintaining effective water and waste systems on boats.
Furthermore, Whale Gusher pumps, including the 12 volt fishbox discharge pump and Whale Gulper toilet pump, provide solutions for various specific needs on a boat. The MK3 Gusher Titan manual pump and Whale GP0550 electric bilge pump enhance functionality, ensuring that the vessel's water systems operate smoothly. Whale makes outdoor living easy with products like the Super Purge and Accumulator pump, offering reliable performance in different applications. Quick Connect plumbing and service kits, such as the MK3 manual and MK5 manual pumps, facilitate maintenance and integration of water systems designed for mobile applications, ensuring an enjoyable boating experience. Whether for shower and sink water management or waste discharge with the Gulper 220 shower pump, Whale pumps, like the Gusher Galley MK2, provide versatile and dependable solutions.