At Yacht Supply 24, we carry a wide range of Whale Pumps products, including electric and manual bilge pumps, shower and waste pumps, fresh water systems, and ventilation fans. No matter what your needs are on the water, Whale Pumps has the solution. Shop our selection today and experience the reliability and quality that Whale Pumps is known for.
Whale Pumps is a leading marine equipment brand that specializes in designing and manufacturing high-quality water and waste management systems for yachts and boats. With a reputation for excellence and innovation, Whale Pumps has become a trusted name in the marine industry.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
1-2 weeks delivery time Price incl. 19% VAT Electric pump designed for narrow holds and small rooms on the ship. A compact and productive pump that will cope with its task better than any other analogue. The output can be arranged in two different positions. Easy access for installation and maintenance. The switch for Super Sub shall be ordered separately. A selection of models is possible: 12V/19mm hose/32l.m; 12V/25.28mm hose/66l.m. and 24V/25.28mm hose/66l.m.
|
Type:
Voltage:
|
1-2 weeks delivery time Price incl. 19% VAT This fully automatic pump works with a built-in switch, equipped with a new electric field sensor. A specially designed model for small rooms, which is perfect for bilge water, automatically turns on and off itself. Easy and quick installation. Not susceptible to swinging the boat. Complies with ISO8849 and ISO 15083. All electronics inside are protected from water, the ABYC and USCG standard. Maximum magnification: 3 meters. Wires: not less than 1.5 mm2.
|
Type:
Voltage:
|
1-2 weeks delivery time Price incl. 19% VAT The Orca drainage pump is an electric submersible pump. It has a very high output and is easy to install. The body of the device is resistant to toxic liquids and fuel. It meets the Navy's ISO 8849 standard. A selection of models is possible: model 500 with a capacity of 32 l/m on 12V, model 950 with a capacity of 57 l/m on 12V, model 1300 with a capacity of 82 l/m on 12V, model 1300 with a capacity of 82 l/m on 24V.
|
Type:
Voltage:
|
1-2 weeks delivery time Price incl. 19% VAT Orca 1300 main drain pump with capacity of 82 l/min. Select 12V and 24V models. Fully automatic pump, works with built-in electric field sensor switch. Easy and quick installation. The pump housing is resistant to toxic liquids and fuel. The ideal option is not to worry about liquid systems on your ship, automation will do everything for you. |
Voltage:
|
1-2 weeks delivery time Price incl. 19% VAT These bilge pumps are provided with a large suction surface. The case is easy to open for cleaning. The switch is sold separately. Usually used as a bilge pump. It is possible to choose a model suitable for modifications: Orca 2000 for 12V and 126 l/m, Orca 2000 for 24V and 120 l/m, Orca 3000 for 12V and 189 l/m, Orca 3000 for 24V and 189 l/m. Contact our specialist, and he will gladly select a suitable model for you. |
Type:
Voltage:
|
1-2 weeks delivery time Price incl. 19% VAT A float switch that is ideal for use in combination with drying bilge pumps. The structure is very easy to assemble and can be mounted on horizontal and vertical surfaces. Power 15 Amperes, for 12/24V networks. In the event of a fault, the device will give an audible alarm. |
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT Orca series submersible bilge pump circuit breaker, with patented sensor. The multi-voltage is suitable for 12 and 24 V, the maximum current is 20 A. The shutdown delay function is set. No moving parts and no problems with salt, oil or dirt on the switch. All electronics are sealed, and the case is completely waterproof. |
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT Gray water tank equipped with Orca 500 pump, relay and filter. Easy to install, with several inlet holes. The tank has a transparent lid and is easy to open for inspection and maintenance. An ideal system that will never fail, with a timely inspection. Throughput - 32 liters per minute, connection at 12V, weight - 1.25 kg. The best products for your yacht. |
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT Waterproof collecting tanks for gray sewage, shower, sinks, washing machine, air conditioner, etc. Suitable for 12 and 24 V systems. A choice of 8 liters or 16 liters is possible. It is equipped with a built-in circuit breaker, and an electric field sensor installed inside. You can switch to 20 A. Ease of assembly and installation. Translucent cover with neoprene ring to prevent the passing of unpleasant odors. Ideal for use with Gulper 320 or 220.
|
Type:
|
1-2 weeks delivery time Price incl. 19% VAT This kit is designed as follows: three independent electronic switches. The lowest switch controls the pump 1 and the switch on the medium level switches controls the pump 2. Pump 2 operates only with waste water. The third pre-alarm switch, it is triggered when the overall level in the tank becomes too high. This system can handle all waste on the ship. Dimensions: 530x240x830 mm. |
Our managers will contact you and clarify the terms of the order
|
1-2 weeks delivery time Price incl. 19% VAT The self-sucking compact foot pump is easy to use, designed to be installed anywhere on the ship. An ideal device in combination with an electric pumping pump. Suitable for drinking water and salt water. All you have to do is kick. |
€ 51,83
-
+
|
1-2 weeks delivery time Price incl. 19% VAT A solution for simple drinking water supply systems. It can be used for mixers and showers. Ideal as a backup pump for drinking and salt water electric pumps. At the inlet and outlet they are adjustable, easy installation with mounting brackets, can be built in three different ways. Double-acting. It is possible to additionally order a set of gaskets made of nitrile rubber, or a set of spare parts with overlays.
|
€ 104,82
Item:
|
1-2 weeks delivery time Price incl. 19% VAT Easy Bailer is a lightweight portable hand pump made of stainless steel, polypropylene, and durable shock resistant PVC. It is suitable for pumping from open boats, boats and canoes. The hose is included. It is possible to choose a model of 45 cm and 65 cm. Throughput 31.4 liters per minute. A high-quality membrane that will last a very long time.
|
Length, mm:
|
1-2 weeks delivery time Price incl. 19% VAT Model BP0350 Henderson Compact 50. Quickly and easily installed with four screws. Mounting depth is less than 127 mm. Compact can be arranged in four positions. The inlet and outlet valves may be arranged in 8 positions at 45 ° and 90 ° angles. The pump housing can rotate 360 degrees for ease of manual use. Suitable for pumping salt water and diesel fuel. It is most often used as a drainage or bilge pump.
|
Item:
|
1-2 weeks delivery time Price incl. 19% VAT The pump model BP9005 with a fixed lever. A line of membrane pumps for waste water with powerful processing, the flow direction can be in numerous positions. The pump body can be quickly disassembled and is made entirely of stainless steel. Self-suction principle of operation. A frost-resistant technology that can function normally, even at low temperatures. A selection of modifications is possible. Model 038 025 is also suitable for diesel fuel pumping. Most are used as bilge water and fan pumps. It is possible to purchase a set of gaskets made of neoprene or nitrile rubber.
|
€ 120,55
Type:
|
1-2 weeks delivery time Price incl. 19% VAT Gusher Titan BP4402 from Whale with stainless steel hull for bulkhead or deck mounting. Heavy pump with high throughput, with linear flow and easy travel. Suitable for boats larger than 12 metres. Most are used as a bilge pump, water, or pump for fundwater. Self-suction function, the case is easy to open, suitable for dirty water. Frost-resistant technology operating at low temperatures. It is possible to purchase sets of gaskets made of neoprene or nitrile rubber.
|
€ 197,02
Item:
|
1-2 weeks delivery time Price incl. 19% VAT A Gusher 10 pump for surface mounting, or, optionally, a model for mounting in a bulkhead. The case is made of anodized aluminum with an epoxy coating, for difficult operating conditions, suitable for intensive use. Approved for use in lifeboats. Ideal with a high throughput of 65 litres per minute. It is possible to select an inspection hatch made of plastic or stainless steel, as well as a set of gaskets made of neoprene or nitrile rubber.
|
€ 360,59
Item:
|
1-2 weeks delivery time Price incl. 19% VAT Gusher 30, pump supplied in modifications: standard, for floor mounting and for installation in a bulkhead. Double-acting pump with the highest power in the range of the ruler. The two membranes provide high throughput and, even if they can be damaged, the pump continues to operate on just one membrane. A very simple model, with open handles for inspection and cleaning. Anodized aluminum pump housing with white powder coating resistant to corrosion. It has approval from the MCA and the US Coast Guard. It is possible to select an inspection hatch made of plastic or stainless steel, as well as gaskets made of neoprene.
|
€ 868,25
Item:
|