VETUS develops marine equipment and onboard systems for leisure boats, yachts, and small commercial vessels. Its product range covers propulsion and maneuvering, exhaust and cooling systems, fuel and freshwater equipment, ventilation, hatches and portlights, pumps, hoses, deck equipment, electrical components, and a wide selection of spare parts.
Download VETUS Catalogue (English)
At Yacht-Supply24.com, we supply VETUS marine equipment and spare parts for new installations, maintenance, replacement, and upgrade projects. We can also assist with product selection, spare part identification, and finding suitable alternatives for existing VETUS systems.
Send us your request if you need help selecting the correct VETUS product or replacement part.
|
1-2 weeks delivery time The Vetus HS101 rod end/ball head fitting is a stainless steel (AISI316) replacement component with M12 x 1.75 threading for MTC52 and MTC72 applications in hydraulic steering systems. It is specified as a replacement rod end designed to seamlessly replace standard fit steel versions within Vetus marine steering system spare parts. |
$ 105.29
-
+
|
|
1-2 weeks delivery time The Vetus HS1014 outer olive component is a brass sealing element intended for use with 3/8 in MT5075 clamp fittings in marine plumbing systems. It is specified to provide a tight seal to support secure, leak-free connections and maintain plumbing system integrity in service. |
$ 3.83
-
+
|
|
1-2 weeks delivery time The Vetus HS1019 inlet screw plug is a 3/8" BSP component intended for use as the inlet screw on an MTP pump in a marine pumping system. Listed as a spare part for Vetus marine steering systems, it is specified as the dedicated inlet screw solution for MTP pump inlet requirements. |
$ 5.74
-
+
|
|
1-2 weeks delivery time The Vetus HS1022 straight union coupling assembly is a brass compression-type connection component for 10 mm hydraulic hose or copper tubing in Vetus marine steering systems. Supplied with olives, it is intended for repair or modification work where a secure tube-to-tube union is required, and is listed as a replacement element (union coupling 10 mm) for steering system spare parts. |
$ 21.49
-
+
|
|
1-2 weeks delivery time The Vetus HS1026 filler cap component is a 3/8 in metal filler screw specified for HTP applications in Vetus marine steering systems. Supplied without a vent hole, it is intended to provide a sealed fill point configuration where a non-vented closure is required. |
$ 21.54
-
+
|
|
1-2 weeks delivery time The Vetus HS1027 filler cap component is a plastic 3/8 in filler screw with a ventilation hole, intended for HTP systems. It is specified as a spare part for Vetus marine steering systems and is used to support filling processes while allowing air circulation via the integrated hole. |
$ 11.01
-
+
|
|
1-2 weeks delivery time The Vetus HS108 copper sealing washer is a marine plumbing sealing component specified for 1/4 in BSP fittings, intended to support leak-free connections and maintain system integrity. Manufactured by Vetus, it is supplied as a spare part for Vetus marine steering systems and uses copper material for the sealing interface. |
$ 2.88
-
+
|
|
1-2 weeks delivery time The Vetus HS116 woodruff key component is a precision-engineered key sized at 3/4 in x 3/16 in, supplied as a spare part for Vetus marine steering systems. It is intended to prevent axial movement in rotating machinery by providing a secure mechanical locating interface and a precise fit in applicable assemblies. |
$ 3.83
-
+
|
|
1-2 weeks delivery time The Vetus HS1218M connection fitting is a 1/2" BSP connection specified for 18 mm applications in marine hydraulic steering systems. Manufactured with a corrosion-resistant construction for harsh marine environments, it is intended to provide a secure and reliable hydraulic connection within various Vetus steering system configurations. |
$ 8.13
-
+
|
|
1-2 weeks delivery time The Vetus HS130 nylon support bracket/foot is a hanger bracket component manufactured from nylon for installation in Vetus MTC30 systems. Supplied as a spare part for Vetus marine steering systems, it is intended to provide mechanical support and stability for a secure installation in the specified steering application. |
$ 41.48
-
+
|
|
1-2 weeks delivery time The Vetus HS136S spring set is a three-piece spare-parts kit for Vetus MT30-MT140 systems, specified in the source text as a set for “Compression Spring And Servo Auto. Valve for MT30.” Supplied as 3 springs, it is intended for maintenance or replacement within Vetus marine steering system applications. |
$ 47.86
-
+
|
|
1-2 weeks delivery time The Vetus HS137 pressure spring locking block is a steering-system replacement component supplied as the spring element for the non-return valve used in MT30 and MT140 systems. Identified in the provided data as the HS137 Pressure Spring Locking Block K30/140, it is intended as a compatible spare part to maintain non-return valve function within the specified steering arrangements. |
$ 16.09
-
+
|
|
1-2 weeks delivery time The Vetus HS138 sealing ring set is a replacement O-ring kit intended for steering system service, specifically for the dual non-return valve (NRV) used in K30/140 systems. Supplied as a complete set of O-rings, it supports restoration of sealing integrity and proper NRV function within Vetus marine steering system installations. |
$ 12.44
-
+
|
|
1-2 weeks delivery time The Vetus HS18 compression spring unit is specified at 14 mm spring diameter, 1.5 mm wire diameter, and 50 mm free length, manufactured from high-quality steel. Supplied as a spare part for Vetus marine steering systems, it provides force and resilience under compression for mechanical applications where consistent return/load characteristics are required. |
$ 3.83
-
+
|
|
1-2 weeks delivery time The Vetus HS21 cutting ring ferrule is a DIN2353 replacement element for steering system pipe connections, specified for copper tube with 10 mm outside diameter and 7 mm length. This component is identified for use with MT65 and MT80 steering system applications and is supplied as a spare part for maintaining steering mechanism integrity. |
$ 3.83
-
+
|
|
1-2 weeks delivery time The Vetus HS210 cylinder eye rod-end component is a replacement part for steering systems, manufactured in AISI316 and specified with M20x1.5 threading. Supplied as a spare part for Vetus marine steering systems, it is intended to maintain steering mechanism functionality by providing the correct rod-end interface with the stated thread size. |
$ 220.15
-
+
|
|
1-2 weeks delivery time The Vetus HS211 tee coupling assembly is a chromed brass union connector with compression fittings for 8 mm pipe/hose installations, specified for use with 8 mm HS04N hose in steering systems. It is identified as a replacement element compatible with a rod end M20X1.5 and is supplied as a spare part for Vetus marine steering systems. |
$ 17.23
-
+
|
|
1-2 weeks delivery time The Vetus HS212 stud branch tee fitting is a precision-engineered connector for fluid system installations using a 1/4" BSP connection and 8–8 mm tube outer diameter interfaces. Supplied as a spare part for Vetus marine steering systems, this tee connector is intended to create a secure branch connection within the linework. |
$ 33.51
-
+
|
What are VETUS marine parts and accessories used for?
VETUS marine parts and accessories are used across a wide range of onboard systems, including propulsion, maneuvering, exhaust, cooling, fuel, freshwater, sanitation, ventilation, steering, and deck equipment. They are suitable for new installations as well as maintenance, repair, replacement, and upgrade work on leisure boats, yachts, and small commercial vessels.
Many VETUS components are designed as part of complete onboard systems, making it easier to match replacement parts and maintain compatibility with existing installations.
Why are VETUS components commonly used in integrated onboard systems?
VETUS develops complete marine systems rather than isolated components, allowing products such as thrusters, exhaust components, cooling equipment, pumps, hoses, control panels, and related accessories to work together within the same installation. This system-based approach can simplify product selection, installation, servicing, and replacement when maintaining an existing VETUS setup.
How can the correct VETUS replacement part be selected?
The correct VETUS replacement part should be selected using the existing product model, part number, dimensions, technical specifications, and installation details. For components within propulsion, exhaust, cooling, sanitation, or maneuvering systems, compatibility with the surrounding equipment should also be checked before ordering.
If the original part number is unavailable, information from the existing equipment label, installation manual, or VETUS catalogue can help identify a suitable replacement or compatible alternative.