VETUS develops marine equipment and onboard systems for leisure boats, yachts, and small commercial vessels. Its product range covers propulsion and maneuvering, exhaust and cooling systems, fuel and freshwater equipment, ventilation, hatches and portlights, pumps, hoses, deck equipment, electrical components, and a wide selection of spare parts.
Download VETUS Catalogue (English)
At Yacht-Supply24.com, we supply VETUS marine equipment and spare parts for new installations, maintenance, replacement, and upgrade projects. We can also assist with product selection, spare part identification, and finding suitable alternatives for existing VETUS systems.
Send us your request if you need help selecting the correct VETUS product or replacement part.
|
1-2 weeks delivery time The Vetus SFCIL hydraulic cylinder assembly is specified with a 40-30 diameter and a 100 stroke for use in marine hydraulic systems. Supplied as a spare part for Vetus Marine Power hydraulics, it is described as providing precise control and reliable performance, with high-quality construction intended for durability and longevity, plus straightforward installation and maintenance. |
$ 1,531.51
-
+
|
|
1-2 weeks delivery time The Vetus STARING lock-nut set is an M24 fastening set intended for the Roll Damping System Version A, providing secure retention for stable installation within Vetus marine power hydraulics spare-part applications. |
$ 363.74
-
+
|
|
1-2 weeks delivery time The Vetus STARINGB lock-nut set is a precision-engineered fastening component set for marine vessel roll damping systems in Version B configuration. It includes M30 lock nuts intended to secure and adjust damping system components, supporting correct alignment and tight fastening for effective roll stabilization. |
$ 363.74
-
+
|
|
1-2 weeks delivery time The Vetus STM9458 flange assembly is a precision-engineered interface component for hydraulic propulsion systems, specified as compatible with HT5236 models. It is supplied as a spare part within the Vetus Marine Power Hydraulics range and is intended to support integration of hydraulic propulsion system hardware. |
$ 333.11
-
+
|
|
1-2 weeks delivery time The Vetus WDC3P5 waterproof deck plug RECON contact is a 3-pin deck connector contact specified for 5mm wire size, supplied as a spare part for Vetus marine power hydraulics products. It is intended as a replacement for the WP deck plug contact (3 pins) and is described as waterproof for service in marine environments to maintain power hydraulics system functionality. |
$ 67
-
+
|
|
1-2 weeks delivery time The Vetus XA2SA02 external hydraulic control module is an extension controller intended for integration in Canbus systems within Vetus Marine Power hydraulics installations. Identified as an external module/controller for hydraulic control, it is described as having a robust construction and is supplied as a spare part for hydraulic applications using Canbus-based control architecture. |
$ 2,010.11
-
+
|
|
1-2 weeks delivery time The Vetus 08-01420 fuse element is a 20A overcurrent protection component intended for Vetus marine electrical installations. It is specified for use with GHX8/14 and GLX6/7 models and provides circuit protection for onboard electronics in the Vetus marine electric power system spare parts category. |
$ 7.56
-
+
|
|
1-2 weeks delivery time The Vetus 12-4585 three-port junction fitting is a 3-way junction used on generator sets to route fluid flow between different systems, supporting system connectivity and overall flow functionality. |
$ 9.48
-
+
|
|
1-2 weeks delivery time The Vetus 13-6440 circuit breaker unit (GHX8SIC) is an electrical protection component used within Vetus wiring loom and controls systems to interrupt current during overloads and fault conditions. Intended for marine vessel installations, it supports electrical safety by safeguarding onboard circuits, electronics, and equipment, and is supplied as a spare part for Vetus marine electric power system applications. |
$ 109.12
-
+
|
|
1-2 weeks delivery time The Vetus 14-8119 GHX14TIC thermal protection circuit breaker is a 25A thermo switch intended for marine electrical circuits on 12V and 24V DC systems. It provides thermal overcurrent protection with fast response, integrated short-circuit protection, and current limiting, and is specified as panel-mountable with a 55mm x 40mm panel cutout. The unit is described as corrosion-resistant for harsh marine environments and is listed as CE, UL, and ISO standards compliant, with a rated interrupt capacity of 10 kA, operating temperature range of -10°C to 60°C, dimensions of approximately 60mm x 45mm x 35mm, and weight of 0.15 kg. |
$ 287.16
-
+
|
|
1-2 weeks delivery time The Vetus 14-8120 display wiring harness assembly is an electrical interconnection component intended for integration with GHX8SIC wiring looms and controls, supporting reliable connectivity for display units in marine and industrial applications. It facilitates connection between the display unit and the control system and is specified to support efficient signal transmission within the electrical system. |
$ 153.15
-
+
|
|
1-2 weeks delivery time The Vetus 14-9241 CEE socket unit is a marine electrical connection component rated at 32A and 400V, intended for supplying power to onboard equipment and appliances. It is specified as a spare part for the Vetus marine electric power system and is compatible with the Vetus GHX14TIC wiring loom and controls for integration in relevant installations. |
$ 57.44
-
+
|
|
1-2 weeks delivery time The Vetus 14-9248 motor start panel assembly is a control panel for starting motors in industrial and marine applications, configured for 3-phase electrical systems and equipped with a DSE4610 controller for monitoring and management. It is intended to integrate with the GHX14TIC series and interfaces with the GHX14TIC wiring loom and associated control systems as a spare part for the Vetus Marine Electric Power System. |
$ 947.62
-
+
|
|
1-2 weeks delivery time The Vetus 14-9318 injection elbow component is intended for fuel injection system integration on GHX8, GHX14S1, GHX14T1, GLX6S1, and GLX7S1 engines. It is specified to optimize fuel injection performance by supporting efficient fuel delivery and combustion, contributing to engine reliability in marine applications, and is supplied as a spare part for the Vetus Marine Electric Power System. |
$ 167.51
-
+
|
|
1-2 weeks delivery time The Vetus 14-9443 32A CEE socket unit is a panel-mount electrical connection component for GHX8 and GLX6/7 marine electric power systems, rated at 32A and 230V AC. It is specified with IP44 splash-proof protection and a corrosion-resistant, UV-resistant, weatherproof plastic construction, using tinned copper conductors and brass contacts with nickel plating, and is stated as CE and RoHS compliant with UL 94-V0 flame resistance and an operating temperature range of -20°C to +60°C. |
$ 93.32
-
+
|
|
1-2 weeks delivery time The Vetus 14-9453 circuit protection device is a circuit breaker replacement element specified for GLX6.5SIC and intended for Vetus electricity systems. It is used to safeguard onboard electrical circuits by providing protection against overloads and short circuits in marine electrical installations. |
$ 109.12
-
+
|
|
1-2 weeks delivery time The Vetus 15-0350 injection elbow assembly with M4 thread is an exhaust-system component for marine engine installations. Manufactured from a corrosion-resistant metal alloy, it is intended to support efficient exhaust gas discharge and is described as compatible with various Vetus marine engines. |
$ 172.30
-
+
|
|
1-2 weeks delivery time The Vetus 15-1192 mounting support component is a precision-engineered support part intended to provide robust, stable mounting in various marine applications. It is specified as compatible with a range of Vetus products, features high-quality construction, and is described as easy to install for minimal downtime within Vetus marine electric power system spare parts use. |
$ 43.94
-
+
|
What are VETUS marine parts and accessories used for?
VETUS marine parts and accessories are used across a wide range of onboard systems, including propulsion, maneuvering, exhaust, cooling, fuel, freshwater, sanitation, ventilation, steering, and deck equipment. They are suitable for new installations as well as maintenance, repair, replacement, and upgrade work on leisure boats, yachts, and small commercial vessels.
Many VETUS components are designed as part of complete onboard systems, making it easier to match replacement parts and maintain compatibility with existing installations.
Why are VETUS components commonly used in integrated onboard systems?
VETUS develops complete marine systems rather than isolated components, allowing products such as thrusters, exhaust components, cooling equipment, pumps, hoses, control panels, and related accessories to work together within the same installation. This system-based approach can simplify product selection, installation, servicing, and replacement when maintaining an existing VETUS setup.
How can the correct VETUS replacement part be selected?
The correct VETUS replacement part should be selected using the existing product model, part number, dimensions, technical specifications, and installation details. For components within propulsion, exhaust, cooling, sanitation, or maneuvering systems, compatibility with the surrounding equipment should also be checked before ordering.
If the original part number is unavailable, information from the existing equipment label, installation manual, or VETUS catalogue can help identify a suitable replacement or compatible alternative.