VETUS develops marine equipment and onboard systems for leisure boats, yachts, and small commercial vessels. Its product range covers propulsion and maneuvering, exhaust and cooling systems, fuel and freshwater equipment, ventilation, hatches and portlights, pumps, hoses, deck equipment, electrical components, and a wide selection of spare parts.
Download VETUS Catalogue (English)
At Yacht-Supply24.com, we supply VETUS marine equipment and spare parts for new installations, maintenance, replacement, and upgrade projects. We can also assist with product selection, spare part identification, and finding suitable alternatives for existing VETUS systems.
Send us your request if you need help selecting the correct VETUS product or replacement part.
|
1-2 weeks delivery time The Vetus EHP001 bronze brush component is a marine maintenance tool manufactured from bronze with dimensions of 13.8 x 6.9 x 20 mm. It is specified for onboard cleaning tasks including cleaning electrical contacts, removing corrosion, and general vessel maintenance, and is listed under spare parts for Vetus Marine Power Hydraulics. |
$ 52.64
-
+
|
|
1-2 weeks delivery time The Vetus EHP01 relay module is a 12V electrical switching component intended for Vetus EHP A to C range systems, including EHPA12 and EHPB12 applications. Supplied as a spare part for Vetus Marine Power Hydraulics, it is specified as a relay for EHP systems operating on 12 volts. |
$ 28.71
-
+
|
|
1-2 weeks delivery time The Vetus EHP02 relay module is a 24V DC relay intended for Vetus EHP A to C range systems, including EHPA24 and EHPB24 applications. Supplied as a spare part for Vetus Marine Power Hydraulics, it is specified as a relay for EHP A to C with a nominal voltage of 24V. |
$ 38.29
-
+
|
|
1-2 weeks delivery time The Vetus EHPAB24 electric drive motor is a 24V motor intended for Vetus marine power hydraulics, specifically for EHP pump systems. It is stated as compatible with EHP pumps A, B, and C, supporting smooth and consistent pump operation in marine applications, and is supplied as a spare part for Vetus Marine Power Hydraulics. |
$ 143.58
-
+
|
|
1-2 weeks delivery time The Vetus EHPDESET carbon brush set (Type D/E) is a replacement brush kit intended for use with a Vetus electrical hydraulic pump and compatible Vetus systems. Supplied as a spare part for Vetus Marine Power Hydraulics installations, it is specified for carbon brush replacement to support continued equipment operation and efficiency. |
$ 86.15
-
+
|
|
1-2 weeks delivery time The Vetus EHPPLUG plug component for an air opening is intended for EHPA12 and provides a secure seal to prevent air leakage in marine applications. It is supplied as a spare part within the Vetus Marine Power Hydraulics range. |
$ 7.56
-
+
|
|
1-2 weeks delivery time The Vetus EHPRSET10 coupling set assembly is a Type R connection kit for EHPAR-BR-CR electro-hydraulic pumps, intended to interface with 10 mm pipe or hose. Supplied as a set containing one coupling unit, it is specified with a 10 mm diameter connection and a listed weight of 0.1500 kg for Vetus Marine Power Hydraulics spare parts applications. |
$ 93.32
-
+
|
|
1-2 weeks delivery time The Vetus HL1215 coupling component provides an interface between M12 X 1.5 threaded fittings and HS25N 6 mm pipework (A) for fluid transfer in marine and industrial systems. It is specified as a spare part within Vetus Marine Power Hydraulics, intended to create a secure connection between fittings and pipes with differing specifications. |
$ 9.58
-
+
|
|
1-2 weeks delivery time The Vetus HL1215S screw-in coupling is a threaded connection component used to join M12 x 1.5 fittings to HS25 N 6mm pipework in Vetus Marine Power Hydraulics installations, including the HL500 lifting system. It is specified as a coupling for secure connection and efficient fluid transfer in marine and industrial applications. |
$ 42.12
-
+
|
|
1-2 weeks delivery time The Vetus HL500BSET complete seal set is a gasket and sealing kit intended for the HL500B cylinder used in Vetus marine power hydraulic lifting systems. Supplied as a comprehensive set of seals, it is specified to help prevent hydraulic leakage and maintain the integrity and operational efficiency of the associated hydraulic components. |
$ 122.52
-
+
|
|
1-2 weeks delivery time The Vetus HL500SET complete seal set is a gasket and sealing set intended for the HL500A cylinder used in Vetus hydraulic lifting system applications. Supplied as a spare part for Vetus Marine Power hydraulics, it is specified as a complete set of seals for the HL500 cylinder arrangement and is used to support hydraulic integrity by preventing leakage in the hydraulic components. |
$ 57.44
-
+
|
|
1-2 weeks delivery time The Vetus HL666 T-coupling assembly is a hydraulic connection component for the Vetus Hylift system, configured with 6-6-6 mm ports to form a T-junction in the hydraulic linework. It is intended to support hydraulic flow distribution for hydraulic lifting components and is supplied as a spare part within Vetus Marine Power hydraulics. |
$ 22.97
-
+
|
|
1-2 weeks delivery time The Vetus HPTESTSET hydraulic test set is a specialized diagnostic kit intended for IBS hydraulics, providing the components and instruments required to test and troubleshoot hydraulic systems. It is used to carry out hydraulic testing aimed at identifying system issues and verifying correct hydraulic system operation within Vetus Marine Power hydraulics applications. |
$ 1,340.07
-
+
|
|
1-2 weeks delivery time The Vetus HS222 bulkhead coupling assembly is a steel tube-connection component specified for 8mm tubing, intended to provide secure connections and efficient fluid transfer. Its bulkhead configuration supports installation through panels or walls to aid system layout in marine, automotive, and industrial fluid systems, and it is listed under spare parts for Vetus Marine Power Hydraulics. |
$ 36.37
-
+
|
|
1-2 weeks delivery time The Vetus HS224 union coupling assembly is a steel tube-connection component with an 8 mm diameter, supplied as a spare part for Vetus Marine Power hydraulics applications. It is intended to provide a secure coupling interface for tube systems in marine and industrial environments. |
$ 5.74
-
+
|
|
1-2 weeks delivery time The Vetus HS225 bulkhead coupling assembly is a steel fluid-system connection component engineered for 12mm tube compatibility. Featuring a bulkhead-style interface intended for installation through panels or walls, it provides a secure tube connection to support efficient fluid transfer across marine, automotive, and industrial system layouts. |
$ 11.49
-
+
|
|
1-2 weeks delivery time The Vetus HS26 support sleeve set is a hydraulic system spare part specified as 6x4 support sleeves with a 4 mm diameter for the MT25 hylift system. These components provide structural support within the hylift arrangement to help maintain correct functionality in marine or industrial applications. |
$ 3.83
-
+
|
|
1-2 weeks delivery time The Vetus HT1015 load-sensing hydraulic plunger pump module is a 45cc displacement unit intended for Deutz and PRM engine applications in marine and industrial hydraulic systems. It is specified as a Vetus hydraulic plunger pump providing fluid transfer and reliable pressure generation in compact, robust form as part of Vetus Marine Power hydraulics spare parts. |
$ 1,914.38
-
+
|
What are VETUS marine parts and accessories used for?
VETUS marine parts and accessories are used across a wide range of onboard systems, including propulsion, maneuvering, exhaust, cooling, fuel, freshwater, sanitation, ventilation, steering, and deck equipment. They are suitable for new installations as well as maintenance, repair, replacement, and upgrade work on leisure boats, yachts, and small commercial vessels.
Many VETUS components are designed as part of complete onboard systems, making it easier to match replacement parts and maintain compatibility with existing installations.
Why are VETUS components commonly used in integrated onboard systems?
VETUS develops complete marine systems rather than isolated components, allowing products such as thrusters, exhaust components, cooling equipment, pumps, hoses, control panels, and related accessories to work together within the same installation. This system-based approach can simplify product selection, installation, servicing, and replacement when maintaining an existing VETUS setup.
How can the correct VETUS replacement part be selected?
The correct VETUS replacement part should be selected using the existing product model, part number, dimensions, technical specifications, and installation details. For components within propulsion, exhaust, cooling, sanitation, or maneuvering systems, compatibility with the surrounding equipment should also be checked before ordering.
If the original part number is unavailable, information from the existing equipment label, installation manual, or VETUS catalogue can help identify a suitable replacement or compatible alternative.