VETUS develops marine equipment and onboard systems for leisure boats, yachts, and small commercial vessels. Its product range covers propulsion and maneuvering, exhaust and cooling systems, fuel and freshwater equipment, ventilation, hatches and portlights, pumps, hoses, deck equipment, electrical components, and a wide selection of spare parts.
Download VETUS Catalogue (English)
At Yacht-Supply24.com, we supply VETUS marine equipment and spare parts for new installations, maintenance, replacement, and upgrade projects. We can also assist with product selection, spare part identification, and finding suitable alternatives for existing VETUS systems.
Send us your request if you need help selecting the correct VETUS product or replacement part.
|
1-2 weeks delivery time The Vetus SLKL35K hose clamp component is a plastic fastening device specified for securing hoses with diameters from 35.7 mm to 41.3 mm (Heyco 2350). Supplied as a spare part for Vetus marine thruster systems, it is intended to provide secure hose retention and is available for purchase in increments of 1. |
$ 4.78
-
+
|
|
1-2 weeks delivery time The Vetus SOL2535E solenoid switch set comprises two changeover relays for reversing electric motor rotation in marine applications such as anchor winches and is specified for BOW2512E and BOW3512E installations. Rated for a maximum power capacity of 1.5 kW at 12 V or 3 kW at 24 V, the relays are built for marine environments with an IP66 waterproof rating to support reliable direction reversal control. |
$ 162.73
-
+
|
|
1-2 weeks delivery time The Vetus STE006 short actuator unit is intended for tunnel applications with a 150mm tunnel diameter and operates on a 12V electrical supply. It is specified as a spare part for Vetus marine thruster systems and is used to provide controlled actuation for adjustment in tunnel-based installations. |
$ 574.32
-
+
|
|
1-2 weeks delivery time The Vetus STE0075 mounting bracket assembly is manufactured for secure attachment of the STE75 actuator in marine installations and is supplied as a spare part for Vetus marine thruster systems. It functions as a mechanical support interface to mount and retain the actuator in position. |
$ 114.86
-
+
|
|
1-2 weeks delivery time The Vetus STE025 actuator base assembly is a replacement mounting foundation for large STE model actuators used in marine manoeuvring systems. It features a bolt-on installation with pre-drilled mounting holes and a standard Vetus actuator mounting configuration, with IP67-rated water resistance and an anti-corrosion protective layer over marine-grade stainless steel/aluminum alloy construction. Rated for loads up to 500 kg, it is specified for operation from -20°C to +80°C and is compatible with large STE series actuators including STE125, STE160, and STE225. |
$ 765.75
-
+
|
|
1-2 weeks delivery time The Vetus STE039 actuator unit is specified for the STE6012D retractable bowthruster, providing an actuation component intended to support operation and control of the retractable thruster system. It is supplied as a spare part for Vetus marine thruster systems and is described as precision-engineered for integration with the STE6012D assembly. |
$ 765.75
-
+
|
|
1-2 weeks delivery time The Vetus STE050 12 V actuator unit is specified for use with the STE75 and STE95 and is designed specifically for the BOW7512D system. Within Vetus’s sound insulation materials range, these actuators are described as being constructed with insulation foams including Sonitech and Prometech, noted in the provided data for soundproofing capability and flame retardancy, and supplied with a self-adhesive backing for installation; a Sonitech single-layer design is also stated. |
$ 765.75
-
+
|
|
1-2 weeks delivery time The Vetus STEBPIN breakpin assembly is a complete breakpin intended to integrate with all retractable systems. It is supplied as a spare part for Vetus marine thruster systems and supports smooth, efficient operation of retractable mechanisms in marine applications. |
$ 37.33
-
+
|
|
1-2 weeks delivery time The Vetus STUD17KW stud pole component is intended for mounting a 17.5 kW Vetus bowthruster electric motor, referenced for BOW220 and BOW285 applications. It is used to provide secure, stable motor mounting to minimize vibration and support smooth bowthruster operation in marine environments, and is supplied as a spare part for Vetus marine thruster systems. |
$ 28.71
-
+
|
|
1-2 weeks delivery time The Vetus TS105 temperature switching device is a replacement component for the BOW25-35 manoeuvring system up to Model D, calibrated to activate at 105°C to support system performance and safety in marine applications. |
$ 124.44
-
+
|
|
1-2 weeks delivery time The Vetus TS110A temperature fuse component is a replacement element with a temperature setting of 110°C for Vetus BOW55-75 series manoeuvring (thruster) applications. Supplied as a spare part for Vetus marine thruster systems, it is specified for use on BOW45, BOW55, and BOW60 models. |
$ 40.21
-
+
|
|
1-2 weeks delivery time The Vetus TS110B temperature set is a preset thermal setpoint component for the BOW90-220 manoeuvring system, specified at 110°C. Supplied as a spare part for Vetus marine thruster systems, it is intended to support system performance and safety by providing a defined temperature setting for BOW90-220 applications. |
$ 40.21
-
+
|
|
1-2 weeks delivery time The Vetus TS95A temperature sensing unit is a replacement temperature sensor with a 95°C temperature setting for the Vetus BOW160-285 marine maneuvering system. It is specified for use in marine thruster/maneuvering applications where accurate temperature readings are required to support system reliability and safety in marine environmental conditions. |
$ 40.21
-
+
|
|
1-2 weeks delivery time The Vetus TS95B temperature set is a replacement element for the BOW9524D manoeuvring system, calibrated for activation at 95°C. Intended for Vetus marine thruster/manoeuvring applications, this spare part supports system safety and operational reliability by providing temperature-based actuation at the specified setpoint. |
$ 40.21
-
+
|
|
1-2 weeks delivery time The Vetus VP000017 electric motor unit is specified as an 8VAC, 1.2kW drive component intended for BOW thruster applications in Vetus marine thruster systems. It is listed as a spare part and is described as supporting smooth operation and precise control of the thruster system during maneuvering. |
$ 1,196.49
-
+
|
|
1-2 weeks delivery time The Vetus VP000018 electric motor unit is specified as an 8VAC, 2.7kW drive motor for Vetus BOW thruster installations. It is listed as a spare part for the BOWA0571 thruster configuration rated at 57 kgf with a 150 mm tunnel, supporting vessel maneuvering and thruster propulsion control within Vetus marine thruster systems. |
$ 1,244.36
-
+
|
|
|
1-2 weeks delivery time The Vetus VP000019 electric drive motor unit is specified for a 15VAC supply and a 3.1 kW power rating for Vetus BOW thruster applications. It is listed as a spare part for Vetus marine thruster systems and is stated as compatible with Vetus BOWB076 spare parts. |
$ 1,292.21
-
+
|
|
1-2 weeks delivery time The Vetus VP000020 cover and sealing rubber component is a replacement part intended for the BP23 steering system, providing a tight, watertight seal to help protect the steering system from water intrusion and corrosion while supporting smooth and precise steering operation. |
$ 29.67
-
+
|
What are VETUS marine parts and accessories used for?
VETUS marine parts and accessories are used across a wide range of onboard systems, including propulsion, maneuvering, exhaust, cooling, fuel, freshwater, sanitation, ventilation, steering, and deck equipment. They are suitable for new installations as well as maintenance, repair, replacement, and upgrade work on leisure boats, yachts, and small commercial vessels.
Many VETUS components are designed as part of complete onboard systems, making it easier to match replacement parts and maintain compatibility with existing installations.
Why are VETUS components commonly used in integrated onboard systems?
VETUS develops complete marine systems rather than isolated components, allowing products such as thrusters, exhaust components, cooling equipment, pumps, hoses, control panels, and related accessories to work together within the same installation. This system-based approach can simplify product selection, installation, servicing, and replacement when maintaining an existing VETUS setup.
How can the correct VETUS replacement part be selected?
The correct VETUS replacement part should be selected using the existing product model, part number, dimensions, technical specifications, and installation details. For components within propulsion, exhaust, cooling, sanitation, or maneuvering systems, compatibility with the surrounding equipment should also be checked before ordering.
If the original part number is unavailable, information from the existing equipment label, installation manual, or VETUS catalogue can help identify a suitable replacement or compatible alternative.