VETUS develops marine equipment and onboard systems for leisure boats, yachts, and small commercial vessels. Its product range covers propulsion and maneuvering, exhaust and cooling systems, fuel and freshwater equipment, ventilation, hatches and portlights, pumps, hoses, deck equipment, electrical components, and a wide selection of spare parts.
Download VETUS Catalogue (English)
At Yacht-Supply24.com, we supply VETUS marine equipment and spare parts for new installations, maintenance, replacement, and upgrade projects. We can also assist with product selection, spare part identification, and finding suitable alternatives for existing VETUS systems.
Send us your request if you need help selecting the correct VETUS product or replacement part.
|
1-2 weeks delivery time The Vetus SET0010 adaptor coupling sleeve is an interface component used to interconnect the motor and gearbox on original Vetus BOW2312A and BOW2512 bow thrusters. It replaces part number BP88 and is specified as D=30 with L=23.5 mm for the sleeve geometry used in the thruster drive connection. |
$ 47.86
-
+
|
|
1-2 weeks delivery time The Vetus SET0011 lower unit tailpiece kit is a complete tailpiece set intended for the Vetus BOW2512 bow thruster (25 Kgf). Supplied as a replacement package for the thruster leg/lower unit, it includes a tail piece complete with dog drive, tunnel gasket, tailpiece wedge and gaskets, securing screws with spring washers, a drive pin, and an anode (pre-fitted). |
$ 765.75
-
+
|
|
1-2 weeks delivery time The Vetus SET0015 solenoid relay pack is a 12V relay/solenoid switch set intended as a replacement component for Vetus bow and stern thruster installations with 50, 55, 60, and 75 Kgf capacities. Identified as BP21912 (noted as previously BP219), it is specified for integration with BOW-series thruster models listed in the input data and supplied as a spare part for Vetus marine thruster systems. |
$ 402.03
-
+
|
|
1-2 weeks delivery time The Vetus SET0017 lower unit complete kit is a replacement set for Vetus bow thruster installations, supplied as a tailpiece/lower unit solution for the BOW3512 and BOW5512A models. The set includes a tail piece complete with dog drive, tunnel gasket, tailpiece wedge and gaskets, securing screws with spring washers, a drive pin, and a pre-fitted anode for service and replacement work on Vetus marine thruster systems. |
$ 955.27
-
+
|
|
1-2 weeks delivery time The Vetus SET0020 solenoid switch set is a 24V relay/solenoid pack identified as BP21924, intended as a replacement unit for Vetus bow and stern thruster models rated at 55 Kgf, 60 Kgf, 75 Kgf, and 80 Kgf. This solenoid pack is specified for integration in the vessel’s maneuvering system and is supplied as a spare part for Vetus marine thruster systems. |
$ 363.74
-
+
|
|
1-2 weeks delivery time The Vetus SET0022 adapter sleeve set is an intermediate coupling intended for the BOW3512B bow thruster, used to provide a secure connection between mating components within the thruster assembly. It is supplied as a spare part for Vetus marine thruster systems and is specified for BOW3512B application. |
$ 50.73
-
+
|
|
1-2 weeks delivery time The Vetus SET0023 carbon brush service set is a 4-piece replacement brush kit with individual brush dimensions of 12.5 x 8 x 25 mm, intended for maintenance of Vetus BOW23 and BOW35 thrusters as well as the Vetus Alex II 12V windlass. Supplied as a set of four carbon brushes, it is specified with a listed weight of 0.01 kg and is categorized as a spare part for Vetus marine thruster systems. |
$ 272.80
-
+
|
|
1-2 weeks delivery time The Vetus SET0029 carbon brush set is a 4-piece replacement brush kit for Vetus BOW7512 thrusters fitted with the motor marked TSL125A 681. Each carbon brush is sized 9 x 30 x 28 mm, supporting correct fitment for maintenance of the thruster motor electrical interface; the input data also identifies the application as 12V. |
$ 306.30
-
+
|
|
1-2 weeks delivery time The Vetus SET0030 carbon brush kit is a four-piece brush set specified for Vetus bow thruster motor service, including BOW7524. The input lists brush dimensions as 9x20x28 and also 20x9x27,5, and identifies applicability across multiple Vetus thruster models including BOW5012, BOW5024, BOW5512, BOW5524, BOW6012, and BOW6024, as well as BOW55, BOW60, and BOW75 references. |
$ 325.45
-
+
|
|
1-2 weeks delivery time The Vetus SET0031 electric motor and solenoid kit is a complete replacement set for Vetus BOW75 12V bow thruster installations, supplied with a fitted solenoid and a grey solenoid cover with thumbscrews. The set is specified at 7000 W and is stated as compatible with BOW7512 bow thrusters, replacing motors marked “TSL125A 4.4kW” and “EC 4.4/1.2/29”. |
$ 1,751.66
-
+
|
|
1-2 weeks delivery time The Vetus SET0035 lower-unit tailpiece kit is a complete replacement set for Vetus bow thruster lower unit (thruster leg) service. Supplied as a set including a tail piece complete with spline drive, tunnel gasket, tailpiece wedge and gaskets, securing screws (M8x40 DIN84) with spring washers, a 5 mm x 27.5 mm drive pin, and a pre-fitted anode; it is specified for BOW7512 and BOW7524 B bow thruster models and is also referenced for BOW75 and BOWB110/BOWB130 applications. |
$ 1,330.49
-
+
|
|
1-2 weeks delivery time The Vetus SET0040 carbon brush replacement set (4x) is intended for Vetus bow thruster service on BOW80, BOW95, and BOW125 models, including the BOW9512/24 application. The set is specified with brush dimensions of 12,5x48x32 and is used to maintain consistent electrical contact as part of the thruster’s electrical system maintenance. |
$ 354.16
-
+
|
|
1-2 weeks delivery time The Vetus SET0041 electric motor and solenoid set is a 12V replacement motor assembly supplied with a fitted solenoid for Vetus BOW95 12V bow thruster applications. The set also includes a grey solenoid cover with thumbscrews to support straightforward installation and is listed under spare parts for Vetus marine thruster systems. |
$ 2,632.28
-
+
|
|
1-2 weeks delivery time The Vetus SET0044 solenoid switch set is a 24 V replacement solenoid pack for Vetus bow and stern thruster models with 95, 110, 125, and 160 kgf thrust ratings. Supplied as a spare part for Vetus marine thruster systems, it is intended to restore correct solenoid switching operation on compatible thruster installations and is referenced as replacing BP110. |
$ 788.09
-
+
|
|
1-2 weeks delivery time The Vetus SET0046 thruster tailpiece set is a complete tailpiece assembly supplied as a replacement component for Vetus BOW-series thruster installations. It is specified for BOW95 fitment and is also listed for BOW60 and BOW95 thruster systems; the assembly is supplied excluding the motor assembly and is identified as a replacement for the Vetus BP1200. |
$ 1,368.78
-
+
|
|
1-2 weeks delivery time The Vetus SET0056 carbon brush replacement set is an 8-piece brush kit for the Vetus BOW80 bow thruster motor, suitable for 12V and 24V systems. The brushes measure 12.5 x 20 x 28.5 mm and are specified for motors with markings EC4,7/1,2/36 4.7 kW; the set supports installations where the motor configuration uses either 4 brushes or 8 brushes. |
$ 804.04
-
+
|
|
1-2 weeks delivery time The Vetus SET0057 carbon brush set is a four-piece replacement brush kit for Vetus BOW22024 bow thrusters. Supplied as 4 carbon brushes with size 12,5x48x32, this spare parts set supports thruster maintenance and reliable operation within Vetus marine thruster systems. |
$ 526.45
-
+
|
|
1-2 weeks delivery time The Vetus SET0058 brush-holder set is a service kit for Vetus BOW22024 bow thruster systems, supplied complete with replacement brushes. It is intended as a spare part for thruster maintenance, providing the brush holder component and associated brushes for installation in the BOW22024 unit. |
$ 315.88
-
+
|
What are VETUS marine parts and accessories used for?
VETUS marine parts and accessories are used across a wide range of onboard systems, including propulsion, maneuvering, exhaust, cooling, fuel, freshwater, sanitation, ventilation, steering, and deck equipment. They are suitable for new installations as well as maintenance, repair, replacement, and upgrade work on leisure boats, yachts, and small commercial vessels.
Many VETUS components are designed as part of complete onboard systems, making it easier to match replacement parts and maintain compatibility with existing installations.
Why are VETUS components commonly used in integrated onboard systems?
VETUS develops complete marine systems rather than isolated components, allowing products such as thrusters, exhaust components, cooling equipment, pumps, hoses, control panels, and related accessories to work together within the same installation. This system-based approach can simplify product selection, installation, servicing, and replacement when maintaining an existing VETUS setup.
How can the correct VETUS replacement part be selected?
The correct VETUS replacement part should be selected using the existing product model, part number, dimensions, technical specifications, and installation details. For components within propulsion, exhaust, cooling, sanitation, or maneuvering systems, compatibility with the surrounding equipment should also be checked before ordering.
If the original part number is unavailable, information from the existing equipment label, installation manual, or VETUS catalogue can help identify a suitable replacement or compatible alternative.