VETUS develops marine equipment and onboard systems for leisure boats, yachts, and small commercial vessels. Its product range covers propulsion and maneuvering, exhaust and cooling systems, fuel and freshwater equipment, ventilation, hatches and portlights, pumps, hoses, deck equipment, electrical components, and a wide selection of spare parts.
Download VETUS Catalogue (English)
At Yacht-Supply24.com, we supply VETUS marine equipment and spare parts for new installations, maintenance, replacement, and upgrade projects. We can also assist with product selection, spare part identification, and finding suitable alternatives for existing VETUS systems.
Send us your request if you need help selecting the correct VETUS product or replacement part.
|
1-2 weeks delivery time The Vetus WS18001 housing assembly is a service component for the WS180 waterseparator/fuel filter, supporting filtration and separation of water and fuel in marine engine fuel systems. It incorporates a threaded M14x1.5 connection to provide a secure interface and straightforward installation, and is specified as a spare part for Vetus marine fuel system applications. |
$ 55.52
-
+
|
|
1-2 weeks delivery time The Vetus WTK13 tank lid component is intended for the Extension Kit used with plastic fuel tanks, providing a secure, tight seal to help prevent fuel leaks and contamination. It is manufactured from durable, high-quality plastic and is specified as suitable for marine environments, with straightforward installation and fitment with the Vetus Extension Kit. |
$ 28.71
-
+
|
|
1-2 weeks delivery time The Vetus WTK14 rubber sealing ring is an oil-resistant sealing component manufactured from high-quality rubber with a 27 mm inner diameter, 60 mm outer diameter, and 2 mm thickness. Intended for mechanical and industrial sealing duties, it is specified for sealing against oils, lubricants, and other petroleum-based fluids and is listed under spare parts for Vetus marine fuel systems. |
$ 3.06
-
+
|
|
Vetus DWS005 - Fresh Water Pressure Pump With Integrated Pressure Sensor for Marine Plumbing Systems
1-2 weeks delivery time The Vetus DWS005 pressure pump assembly with integrated sensor is an automatic water pressure management unit for marine plumbing systems, supplying consistent onboard water flow based on demand. It is specified with a built-in pressure sensor, supports 12V or 24V installations, and is rated for a flow rate of up to 5.5 gallons per minute, in a compact, durable construction intended for Vetus marine fresh water system service. |
$ 670.04
-
+
|
|
1-2 weeks delivery time The Vetus FTSL tank-nipple service wrench is a replacement maintenance tool intended for secure handling of tank nipples during system service. It is specified for use with vessel fuel systems and is listed within spare parts for Vetus marine fresh water systems, supporting precise and convenient maintenance tasks. |
$ 9.58
-
+
|
|
1-2 weeks delivery time The Vetus HYDRF001 pressure water pump assembly is a 12V replacement element for the hydrophor pump used in the HF1208 12V 8 L fresh water system and Hydrf12 (8 Ltr) applications. Supplied as a spare part for Vetus marine fresh water systems, it supports consistent water circulation and is described as a straightforward replacement component for maintaining system operation. |
$ 354.16
-
+
|
|
1-2 weeks delivery time The Vetus HYDRF002 hydrophor pump unit is a 24 V pressure water pump specified for the HF2408 24 V 8 L fresh water system on marine vessels. It is intended to support water circulation within the HF2408 installation to provide a dependable onboard water supply and is supplied as a spare part for Vetus marine fresh water systems. |
$ 354.16
-
+
|
|
1-2 weeks delivery time The Vetus HYDRF003 strainer filter assembly is a replacement filtration component for Hydrophor 8L fresh water systems, incorporating a 13 mm mesh strainer to protect the pressure water pump from debris. It has a 1/2" BSP water inlet, supports water flow up to 10 L/min, and is rated for a maximum operating pressure of 4 bar with a working temperature range of -10°C to +60°C. The compact unit measures 102 mm x 83 mm x 95 mm, weighs 0.12 kg, and is specified as UV resistant and corrosion resistant; maintenance is by rinsing, with stated flow resistance <0.05 bar at 10 L/min. |
$ 28.71
-
+
|
|
1-2 weeks delivery time The Vetus HYDRF004 fitting component is engineered for the elbow connection on the Hydrophor 8 ltr system and is designed to provide a secure interface for 13 mm hoses. Supplied as a spare part for Vetus marine fresh water systems, it is intended to maintain reliable hose-to-elbow connectivity within the Hydrophor installation. |
$ 11.49
-
+
|
|
1-2 weeks delivery time The Vetus HYDRF007 hydrophore pump spareset is a maintenance kit intended for the Hydrophorepomp 8L configuration with a white diaphragm for onboard fresh water systems. Supplied as a spare parts set, it includes diaphragms, seals, and other essential components used for service and repair to support continued efficient operation and reliability of the hydrophore pump. |
$ 35.41
-
+
|
|
1-2 weeks delivery time The Vetus HYDRF008 pressure-activated switch assembly is a 16 A unit for 12 V and 24 V DC marine fresh water systems, specified as a normally open pressure switch with SPDT electrical contacts. It provides adjustable pressure control across 1.5–5.0 bar with a response time of < 1 second, carries an IP65 ingress protection rating, and is intended for surface mounting using standard bolt holes. Dimensions are 105 mm (H) x 100 mm (W) x 65 mm (D), weight is 0.36 kg, operating temperature is -20°C to +85°C, maximum working voltage is 30 V DC, and maximum pressure is 10 bar with a stated minimum pressure of 1.0 bar cut-off threshold. |
$ 67
-
+
|
|
1-2 weeks delivery time The Vetus HYDRF019 pressure gauge unit is a manometer spare part for fresh water systems, specified with a 0 to 6 bar measurement range for monitoring system pressure. It is listed within spare parts for Vetus marine fresh water systems and is intended to support accurate pressure management in the water circuit. |
$ 37.33
-
+
|
|
1-2 weeks delivery time The Vetus HYDRF022 membrane component is a replacement rubber diaphragm for an 8 liter Hydrophor pressurized water system tank used in Vetus marine fresh water installations, specified for Hydrophore 12/24V systems. Intended as a spare part for the Vetus Hydrophor series, it is used to help maintain consistent water pressure in the onboard pressurized water system. |
$ 33.51
-
+
|
|
1-2 weeks delivery time The Vetus HYDRF024 pressurized water tank assembly is a complete 8.0-liter pressure tank intended for fresh water systems in marine and industrial applications. Supplied as a complete unit, it supports water storage and distribution and is provided with a replacement element described as the pressure tank compl. 8 l. |
$ 86.15
-
+
|
|
1-2 weeks delivery time The Vetus HYDRF025 hydrophor pressure pump assembly is a 12V pressure water pump specified with a 17L capacity for HF1219 installations and described for Hydrf1220 (17 Ltr). Operating on the same principle as the standard HF system, it incorporates an adjustable pressure switch, a manometer for pressure monitoring, and a non-return valve; the HYDRF type pressurized water system is stated to comply with EMC requirements. |
$ 421.16
-
+
|
|
1-2 weeks delivery time The Vetus HYDRF026 hydrophor pump assembly is a 24V DC self-priming pressure water pump specified at 17 L/min and 2.5 bar for marine fresh water systems, and is stated as suitable for both fresh and saltwater environments. It has a maximum suction head of 2 m and maximum delivery head of 6 m, uses 1/2 inch BSP inlet/outlet connections, and is rated for continuous duty with IPX4 ingress protection and CE certification; electrical consumption is listed as 3.5 A and 85 W, with dimensions 107 x 124 x 398 mm and weight 2.92 kg. |
$ 421.16
-
+
|
|
1-2 weeks delivery time The Vetus HYDRF027 strainer component is a 19 mm filtration device intended for hydrophores with a 19-liter capacity in Vetus marine fresh water systems. It filters impurities and debris from the water supply to reduce clogging and protect the hydrophore system, supporting smooth operation and service life. |
$ 33.51
-
+
|
|
1-2 weeks delivery time The Vetus HYDRF028 fitting component is a 19 mm connection intended for hydrophore systems with a 19 liter capacity. Specified as a spare part for Vetus marine fresh water systems, it supports secure installation and pressure management within onboard fresh water distribution arrangements and is described as having durable construction for marine environments. |
$ 7.66
-
+
|
What are VETUS marine parts and accessories used for?
VETUS marine parts and accessories are used across a wide range of onboard systems, including propulsion, maneuvering, exhaust, cooling, fuel, freshwater, sanitation, ventilation, steering, and deck equipment. They are suitable for new installations as well as maintenance, repair, replacement, and upgrade work on leisure boats, yachts, and small commercial vessels.
Many VETUS components are designed as part of complete onboard systems, making it easier to match replacement parts and maintain compatibility with existing installations.
Why are VETUS components commonly used in integrated onboard systems?
VETUS develops complete marine systems rather than isolated components, allowing products such as thrusters, exhaust components, cooling equipment, pumps, hoses, control panels, and related accessories to work together within the same installation. This system-based approach can simplify product selection, installation, servicing, and replacement when maintaining an existing VETUS setup.
How can the correct VETUS replacement part be selected?
The correct VETUS replacement part should be selected using the existing product model, part number, dimensions, technical specifications, and installation details. For components within propulsion, exhaust, cooling, sanitation, or maneuvering systems, compatibility with the surrounding equipment should also be checked before ordering.
If the original part number is unavailable, information from the existing equipment label, installation manual, or VETUS catalogue can help identify a suitable replacement or compatible alternative.