VETUS develops marine equipment and onboard systems for leisure boats, yachts, and small commercial vessels. Its product range covers propulsion and maneuvering, exhaust and cooling systems, fuel and freshwater equipment, ventilation, hatches and portlights, pumps, hoses, deck equipment, electrical components, and a wide selection of spare parts.
Download VETUS Catalogue (English)
At Yacht-Supply24.com, we supply VETUS marine equipment and spare parts for new installations, maintenance, replacement, and upgrade projects. We can also assist with product selection, spare part identification, and finding suitable alternatives for existing VETUS systems.
Send us your request if you need help selecting the correct VETUS product or replacement part.
|
1-2 weeks delivery time The Vetus SMO00027 vane assembly is supplied as a vane-only spare part including a connection kit for the WSD822 wind direction flag system. It is intended as an accessory for Vetus boat systems to provide a clear visual indication of wind direction for navigation on boats and yachts. |
$ 67
-
+
|
|
1-2 weeks delivery time The Vetus SPC005 complete WTR250 print kit is a printing kit/PCB-related spare part supplied as a comprehensive set including the necessary components for use with the WTR250 model. Listed under spare parts for Vetus boat systems, it is specified as compatible with WTR250. |
$ 648.97
-
+
|
|
1-2 weeks delivery time The Vetus SPC64 printed circuit board assembly is designed for the WS822 MHU and supports correct unit operation and control within the system. Supplied as a spare part for Vetus boat systems, this PCB is intended to maintain proper functioning and smooth operation of the WS822 MHU unit. |
$ 47.86
-
+
|
|
1-2 weeks delivery time The Vetus SPD002 transducer unit is a complete transmitter component intended for integration with the Speedlog Combi-3 system, providing vessel speed measurement data. Identified as model SPD002, it is specified as compatible with Speedlog Combi-3 and supplied as a spare part for Vetus boat systems. |
$ 137.65
-
+
|
|
1-2 weeks delivery time The Vetus SPD006 transducer transmitter is a Speedlog Combi-6 measurement system component intended to provide vessel speed data. It is specified as model SPD006 and is designed for integration with the Speedlog Combi-6 for accurate speed measurements as part of the onboard speed logging arrangement. |
$ 311.67
-
+
|
|
1-2 weeks delivery time The Vetus STM6571 frontplate panel kit is a control panel faceplate assembly supplied with the corresponding foil for MP34 control panel installations. It is specified as a replacement or upgrade component for marine control systems and instrumentation, and is listed as compatible with DT44, DET44, DT66, DET66, DTA44, DETA44, DTA66, DETA66, DT43, DTA43, DT64, DTA64, DT4.70, and DTA4.85 models. |
$ 86.15
-
+
|
|
1-2 weeks delivery time The Vetus STM6913 printed circuit board (PCB) panel assembly is an electrical control component for MP20, MP21, and MP22 24V marine electrical system models, supplied with the new code 08-01351. It is specified as a PCB-based panel intended for integration in these 24V configurations to support system control and functionality within Vetus boat systems. |
$ 31.59
-
+
|
|
1-2 weeks delivery time The Vetus STM6915 printed circuit board panel assembly is a complete MP34 24V unit specified for Print Panel 3424 and intended for use with Instrument Panel Model 34 (09-2005). It is listed as compatible with DT44 engines, DET44 engines, DTA44 engines, DETA44 engines, DT66 engines, DET66 engines, DTA66 engines, and DETA66 engines as part of Vetus marine electrical system spare parts. |
$ 30.44
-
+
|
|
1-2 weeks delivery time The Vetus STM6975 engine panel gasket is a sealing component intended for the MP34A engine panel and specified as compatible with DT44, DET44, DTA44, DETA44, DT66, DET66, DTA66, and DETA66 engine models. It provides a secure seal to help prevent leakage at the engine panel interface and is supplied as a spare part for Vetus boat systems. |
$ 47.86
-
+
|
|
1-2 weeks delivery time The Vetus STM6982 gasket component is custom-engineered for MP20A, MP21A, and MP22A engine panel models, providing a tight sealing interface for the panel assembly. It is intended to protect internal panel components from dust, moisture, and other environmental contaminants and is supplied as a spare part for Vetus boat systems. |
$ 9.58
-
+
|
|
1-2 weeks delivery time The Vetus TGS813 sensor module is a 6-pin plug-in replacement sensor intended for the now discontinued Vetus GD900 gas detector. It is used within Vetus gas detection systems to support gas leak detection as a spare part for Vetus boat systems. |
$ 114.86
-
+
|
|
1-2 weeks delivery time The Vetus VP000036 front panel assembly with integrated gasket is intended for the MPA34 CAN gauge only, providing a sealed instrument interface for marine and industrial installations. Supplied as a panel-and-gasket set, it is specified to ensure compatibility with the MPA34 CAN gauge and to help protect the gauge from environmental exposure while maintaining operational integrity. |
$ 156.99
-
+
|
|
1-2 weeks delivery time The Vetus VP000042 display panel assembly is a complete PWLK system interface providing onboard monitoring and control functionality. It supports real-time visualization and management of engine diagnostics, fuel level information, and battery status, using a user-friendly, intuitive operator interface intended for marine environments. |
$ 187.62
-
+
|
|
1-2 weeks delivery time The Vetus VP000128 front panel assembly for MPA2 units is an integrated control-system panel supplied with press-in studs, foil, a gasket, and screws for installation. It is specified for use in marine control systems and is described as providing a watertight seal to protect against moisture and contaminants. |
$ 150.27
-
+
|
|
1-2 weeks delivery time The Vetus VP000408 mounting ring/nut component is intended for TACHB applications and is specified for a 100 mm diameter fitment. It is used to securely mount compatible equipment or devices requiring a stable attachment within Vetus boat system installations. |
$ 12.07
-
+
|
|
1-2 weeks delivery time The Vetus VP000413 gauge mounting ring/nut assembly is specified for secure installation of 52 mm gauges in marine and industrial applications. It provides stable mechanical retention and instrument support, with a precise 52 mm size intended to simplify installation and maintenance, and is described as corrosion-resistant for service in demanding environments. |
$ 9.09
-
+
|
|
1-2 weeks delivery time The Vetus DEKD09 sealing ring assembly is an oil resistant O-ring specified at 49 x 3 mm and intended for the FTKIT filler neck. Supplied as a spare part for Vetus marine fuel systems, it is used to provide a secure seal at the filler neck interface where reliable sealing is required. |
$ 2.88
-
+
|
|
1-2 weeks delivery time The Vetus DM50001 sealing ring component is an O-ring intended for the bleeder on VTE fuel filters in marine or industrial fuel systems. It provides a secure seal to prevent air or fuel leakage and is supplied as a spare part for Vetus marine fuel system installations. |
$ 8.13
-
+
|
What are VETUS marine parts and accessories used for?
VETUS marine parts and accessories are used across a wide range of onboard systems, including propulsion, maneuvering, exhaust, cooling, fuel, freshwater, sanitation, ventilation, steering, and deck equipment. They are suitable for new installations as well as maintenance, repair, replacement, and upgrade work on leisure boats, yachts, and small commercial vessels.
Many VETUS components are designed as part of complete onboard systems, making it easier to match replacement parts and maintain compatibility with existing installations.
Why are VETUS components commonly used in integrated onboard systems?
VETUS develops complete marine systems rather than isolated components, allowing products such as thrusters, exhaust components, cooling equipment, pumps, hoses, control panels, and related accessories to work together within the same installation. This system-based approach can simplify product selection, installation, servicing, and replacement when maintaining an existing VETUS setup.
How can the correct VETUS replacement part be selected?
The correct VETUS replacement part should be selected using the existing product model, part number, dimensions, technical specifications, and installation details. For components within propulsion, exhaust, cooling, sanitation, or maneuvering systems, compatibility with the surrounding equipment should also be checked before ordering.
If the original part number is unavailable, information from the existing equipment label, installation manual, or VETUS catalogue can help identify a suitable replacement or compatible alternative.