VETUS develops marine equipment and onboard systems for leisure boats, yachts, and small commercial vessels. Its product range covers propulsion and maneuvering, exhaust and cooling systems, fuel and freshwater equipment, ventilation, hatches and portlights, pumps, hoses, deck equipment, electrical components, and a wide selection of spare parts.
Download VETUS Catalogue (English)
At Yacht-Supply24.com, we supply VETUS marine equipment and spare parts for new installations, maintenance, replacement, and upgrade projects. We can also assist with product selection, spare part identification, and finding suitable alternatives for existing VETUS systems.
Send us your request if you need help selecting the correct VETUS product or replacement part.
|
1-2 weeks delivery time The Vetus VD20642 PTO-A power take-off unit is manufactured to BS1628 standards with an SAE-B mounting interface and a 13-tooth configuration (16/32dp). It is intended to provide a mechanical drive connection between an engine and auxiliary equipment for power transfer in marine and industrial applications. |
$ 2,775.86
-
+
|
|
1-2 weeks delivery time The Vetus VD20643 PTO bearing case unit is a driven PTO support component for hydraulic pump power take-off duty on Vetus VD4.120, VD4.140, VD6.170, and VD6.210 marine engines. It supports and aligns the PTO shaft to ensure proper rotation and reliable power transmission to auxiliary equipment, and is noted as compatible with Vetus Power Take-Off A for integration into existing PTO systems. |
$ 3,733.06
-
+
|
|
1-2 weeks delivery time The Vetus VD20644 torx-head bolt is a fastening component specified for Vetus Power Take-off A systems used across VD4.120, VD4.140, VD6.170, and VD6.210 models. It is used to secure components within the power take-off assembly, supporting reliable operation in marine and industrial applications, with a torx head design intended for secure tightening and service access. |
$ 42.12
-
+
|
|
1-2 weeks delivery time The Vetus VD20645 Torx bolt is a fastening component for Vetus marine engine assemblies, specified for power take off A applications. It is listed as a spare part for Vetus marine engines and is compatible with VD4.120, VD4.140, VD6.170, and VD6.210 engine models. |
$ 45.95
-
+
|
|
1-2 weeks delivery time The Vetus VD20646 banjo bolt component is intended for connecting oil lines to the power take-off (PTO) unit on Vetus VD4.120, VD4.140, VD6.170, and VD6.210 marine engines. It is used to ensure a secure oil-line connection, supports consistent oil flow for lubrication, and helps prevent leaks in marine operating conditions. |
$ 22.97
-
+
|
|
1-2 weeks delivery time The Vetus VD20648 hollow screw (banjo bolt) is an oil line connection component for the Power Take-Off (PTO) A installation on Vetus VD4/VD6 engine variants. It is specified as a hollow screw for power take-off applications and is listed as compatible with VD4.120, VD4.140, VD6.170, and VD6.210 engines for secure connection and operation of the PTO system. |
$ 29.67
-
+
|
|
1-2 weeks delivery time The Vetus VD20650 PTO oil line assembly is intended for use on the power take-off (PTO) units of Vetus VD4 and VD6 marine engines, including VD4.120, VD4.140, VD6.170, and VD6.210. It is specified as a spare part for Vetus marine engine systems and is described as precision engineered to support efficient oil flow for lubrication of PTO components, with materials selected for resistance to corrosion and abrasion in marine environments. |
$ 244.08
-
+
|
|
1-2 weeks delivery time The Vetus VD20651 sealing O-ring is a white identification gasket intended for the PTO bearing case on Vetus VD4 and VD6 engines. It is specified to provide a secure seal to prevent leakage and to maintain correct operation of the power take-off system through a precise fit and durable construction within the PTO assembly. |
$ 42.12
-
+
|
|
1-2 weeks delivery time The Vetus VD20652 spline sleeve component is a spline bushing for power take-off (PTO) applications on Vetus VD-series engines, specified as compatible with VD4.120, VD4.140, VD6.170, and VD6.210. It is intended to support smooth and efficient power transfer and is described as precision-engineered for optimal fit and performance in marine environments, manufactured from high-quality, durable materials. |
$ 995.48
-
+
|
|
1-2 weeks delivery time The Vetus VD20654 PTO power take off unit (PTO A BS 0644 with SAE B mounting) is engineered to BS 0644 standards and specified as AS 13T and 16/32 DP for DT(A)67 applications. It provides a mechanical interface between an engine and auxiliary equipment to support reliable power transmission and is listed as a spare part for Vetus marine engines. |
$ 1,024.19
-
+
|
|
1-2 weeks delivery time The Vetus VD20690 hose assembly (D 90) is a marine and industrial fluid-transfer component supplied as a spare part for Vetus marine engines, specified as compatible with the DTA67 engine. It is intended for use in cooling systems, fuel lines, and other fluid transfer tasks where dependable flow and service life are required. |
$ 421.16
-
+
|
|
1-2 weeks delivery time The Vetus VD20692 sealing gasket is intended to create a secure seal for D4.29 engine applications in marine and industrial service. It is specified as a spare part for Vetus marine engines and is used to support tight connections to help prevent leakage and maintain operational performance. |
$ 55.03
-
+
|
|
1-2 weeks delivery time The Vetus VD20693 exhaust elbow assembly is a dry exhaust component for DT4.29 marine engines, intended to direct exhaust gases away from the engine. As described, this exhaust injection elbow supports exhaust gas management by reducing backpressure to optimize overall engine operation in marine environments and is supplied as a spare part for Vetus marine engines. |
$ 794.47
-
+
|
|
1-2 weeks delivery time The Vetus VD20696 turbocharger clamp strap is a fastening component intended for DT64 and DTA64 turbochargers used with their respective exhaust manifolds. It provides secure attachment and maintains proper alignment of the turbocharger-to-manifold assembly to support engine performance and exhaust gas management in marine environments, with design considerations for high temperatures and vibration. |
$ 181.86
-
+
|
|
1-2 weeks delivery time The Vetus VD20703 oil pipe PTO set is a marine engine lubrication pipework set specified for DT(A)67 engine applications. It is intended to support oil transmission to engine components and is described as having durable construction for marine environments while minimizing the risk of leaks or oil-flow interruptions. |
$ 268.01
-
+
|
|
1-2 weeks delivery time The Vetus VD20705 protective cover component is intended for the PTO connection on DT(A)44/66 Deutz engines used in marine applications. It provides reliable protection for the PTO connection and is described as durable and resistant to environmental exposure, specifically moisture and salt, as part of the Vetus marine engine spare parts range. |
$ 80.41
-
+
|
|
1-2 weeks delivery time The Vetus VD20706 O-ring sealing component is a 96x4 mm gasket element manufactured from NBR70 and intended for covering the PTO hole on DT(A)44/66 Deutz engines. It provides a tight seal to prevent leakage and support correct engine operation within Vetus marine engine applications. |
$ 7.66
-
+
|
|
1-2 weeks delivery time The Vetus VD20721 sealing O-ring is a spare part intended for the oil sump on DT44, DET44, DTA44, and DETA44 engine applications (DT(A)44-66), providing a secure seal to support reliable engine operation within Vetus marine engine systems. |
$ 26.81
-
+
|
What are VETUS marine parts and accessories used for?
VETUS marine parts and accessories are used across a wide range of onboard systems, including propulsion, maneuvering, exhaust, cooling, fuel, freshwater, sanitation, ventilation, steering, and deck equipment. They are suitable for new installations as well as maintenance, repair, replacement, and upgrade work on leisure boats, yachts, and small commercial vessels.
Many VETUS components are designed as part of complete onboard systems, making it easier to match replacement parts and maintain compatibility with existing installations.
Why are VETUS components commonly used in integrated onboard systems?
VETUS develops complete marine systems rather than isolated components, allowing products such as thrusters, exhaust components, cooling equipment, pumps, hoses, control panels, and related accessories to work together within the same installation. This system-based approach can simplify product selection, installation, servicing, and replacement when maintaining an existing VETUS setup.
How can the correct VETUS replacement part be selected?
The correct VETUS replacement part should be selected using the existing product model, part number, dimensions, technical specifications, and installation details. For components within propulsion, exhaust, cooling, sanitation, or maneuvering systems, compatibility with the surrounding equipment should also be checked before ordering.
If the original part number is unavailable, information from the existing equipment label, installation manual, or VETUS catalogue can help identify a suitable replacement or compatible alternative.