VETUS develops marine equipment and onboard systems for leisure boats, yachts, and small commercial vessels. Its product range covers propulsion and maneuvering, exhaust and cooling systems, fuel and freshwater equipment, ventilation, hatches and portlights, pumps, hoses, deck equipment, electrical components, and a wide selection of spare parts.
Download VETUS Catalogue (English)
At Yacht-Supply24.com, we supply VETUS marine equipment and spare parts for new installations, maintenance, replacement, and upgrade projects. We can also assist with product selection, spare part identification, and finding suitable alternatives for existing VETUS systems.
Send us your request if you need help selecting the correct VETUS product or replacement part.
|
1-2 weeks delivery time The Vetus VD20126 valve seat insert component is intended for installation in the cylinder head assembly of DT43 and DTA43 engines, providing a sealing surface for engine valves. It is specified to support precise valve alignment and sealing to maintain compression and reduce leakage, and is supplied as a spare part for Vetus marine engine applications (also referenced for industrial use). |
$ 55.52
-
+
|
|
1-2 weeks delivery time The Vetus VD20128 cylinder head sealing gasket is a 1.54 mm thick component intended to provide a reliable cylinder head seal on DT43 and DTA43 marine engines. It is specified to maintain proper compression and help prevent leakage of combustion gases and coolant under high temperature and pressure operating conditions as part of Vetus marine engine service spares. |
$ 382.88
-
+
|
|
1-2 weeks delivery time The Vetus VD20129 cylinder head sealing gasket is specified for DT(A)43 engines and is supplied with a stated thickness of 1.64mm. It is intended to provide a reliable seal at the cylinder head interface and is listed under spare parts for Vetus marine engines. |
$ 402.03
-
+
|
|
1-2 weeks delivery time The Vetus VD20130 cylinder head fastener is a precision-engineered bolt intended for cylinder head assembly work and specified with a 1.74 mm diameter. Supplied as a spare part for Vetus marine engine applications, it is described as having durable construction to support a secure, long-lasting fit. |
$ 382.88
-
+
|
|
1-2 weeks delivery time The Vetus VD20131 cylinder head fastening bolt is a marine engine spare part manufactured for precision and durability, built to the DT/A 43 specification for secure clamping in specified cylinder head applications. It is intended for use across applicable cylinder head assemblies where a robust fastening solution is required within Vetus marine engine service work. |
$ 42.12
-
+
|
|
1-2 weeks delivery time The Vetus VD20132 cylinder head fastening bolt is a spare part intended for cylinder head DT64 and DTA64 assemblies and specified as DT/A 43. It is engineered to provide secure fastening for these cylinder head applications within Vetus marine engine systems. |
$ 153.15
-
+
|
|
1-2 weeks delivery time The Vetus VD20133 cylinder head gasket is a sealing component specified for DT(A)64 marine engines with a stated thickness of 1.4 mm. It is intended to provide a reliable seal at the cylinder head interface to minimize leak risk and support combustion efficiency as part of Vetus marine engine spare parts. |
$ 440.31
-
+
|
|
1-2 weeks delivery time The Vetus VD20134 cylinder head sealing gasket is specified at 1.5mm thickness and is intended for DT64 and DTA64 cylinder head fitment. It is precision-engineered to provide a tight, leak-free seal between the cylinder head and engine block, with stated resistance to high temperatures and pressures for durable service in Vetus marine engine applications. |
$ 507.32
-
+
|
|
1-2 weeks delivery time The Vetus VD20135 cylinder head gasket element is engineered to seal DT(A)64 cylinder head assemblies with a specified thickness of 1.6 mm, supporting correct compression and helping prevent leakage to maintain engine performance. It is supplied as a spare part within the Vetus marine engine range and is also stated as suitable for marine or industrial applications. |
$ 507.32
-
+
|
|
1-2 weeks delivery time The Vetus VD20136 blanking parts set is a sealing component intended to close unused openings or ports in plumbing, hydraulic, and mechanical systems. Manufactured from high-quality materials, these parts are specified for durable service in demanding marine and industrial environments to help prevent leaks and maintain system integrity. |
$ 81.36
-
+
|
|
1-2 weeks delivery time The Vetus VD20137 gasket set is intended for the DT43 and DTA43 engine series and supplies the essential gaskets required for the cylinder head assembly, while explicitly excluding the cylinder head gasket. The set is specified as a spare part for Vetus marine engines and is used to maintain sealing integrity and help prevent leakage in the cylinder head assembly during maintenance and repair. |
$ 1,675.08
-
+
|
|
1-2 weeks delivery time The Vetus VD20138 engine gasket set is a sealing component kit intended for DT64 and DTA64 marine engine applications. Supplied as a comprehensive set for engine assembly, it provides the required gaskets to support proper sealing and leak prevention, specifically excluding the cylinder head gasket. |
$ 1,770.81
-
+
|
|
1-2 weeks delivery time The Vetus VD20139 sealing gasket is a gasket-type spare part intended for marine equipment applications where a tight seal is required to help prevent leaks and support system performance. Identified as model VD20139, it is specified as being manufactured from high-quality sealing material and is listed under spare parts for Vetus marine engines, with use cases noted for engine components, plumbing fixtures, and other onboard machinery. |
$ 12.44
-
+
|
|
1-2 weeks delivery time The Vetus VD20140 valve cover fastening bolt is a hexagon bolt specified as M6x75 for valve cover and sump vent assemblies on DT44, DET44, DTA44, and DETA44 applications. Supplied as a Vetus spare part, it is intended to meet Vetus standards for durability and secure fastening in marine or industrial installations. |
$ 4.78
-
+
|
|
1-2 weeks delivery time The Vetus VD20145 sealing gasket is intended for the air intake manifold on DT43 and DTA43 engine applications, providing a reliable sealing interface to help prevent intake-system leaks. It is supplied as a spare part within the Vetus marine engine spares category and is specified for use on the DT43–DTA43 air intake manifold installation. |
$ 4.78
-
+
|
|
1-2 weeks delivery time The Vetus VD20146 hex-head fastening bolt is a metric M6 x 25 mm hexagon bolt specified for DT43 applications. Intended for secure fastening in marine environments, it is supplied as a spare part for Vetus marine engine equipment where reliable clamping under challenging operating conditions is required. |
$ 7.66
-
+
|
|
1-2 weeks delivery time The Vetus VD20150 threaded sealing plug is an M14x1.5 screw plug intended for the air intake manifold on DT43 and DTA43 engines. It is used to provide a secure seal to help prevent air leaks in the intake system, supporting correct combustion conditions and engine performance in marine and industrial environments. |
$ 21.06
-
+
|
|
1-2 weeks delivery time The Vetus VD20152 O-seal element is a 35x6 sealing component intended for the air intake manifold on DT43 and DTA43 engine applications. It is used to provide a tight seal at the intake manifold interface to help prevent air leaks and maintain intake system integrity within Vetus marine engine installations. |
$ 42.12
-
+
|
What are VETUS marine parts and accessories used for?
VETUS marine parts and accessories are used across a wide range of onboard systems, including propulsion, maneuvering, exhaust, cooling, fuel, freshwater, sanitation, ventilation, steering, and deck equipment. They are suitable for new installations as well as maintenance, repair, replacement, and upgrade work on leisure boats, yachts, and small commercial vessels.
Many VETUS components are designed as part of complete onboard systems, making it easier to match replacement parts and maintain compatibility with existing installations.
Why are VETUS components commonly used in integrated onboard systems?
VETUS develops complete marine systems rather than isolated components, allowing products such as thrusters, exhaust components, cooling equipment, pumps, hoses, control panels, and related accessories to work together within the same installation. This system-based approach can simplify product selection, installation, servicing, and replacement when maintaining an existing VETUS setup.
How can the correct VETUS replacement part be selected?
The correct VETUS replacement part should be selected using the existing product model, part number, dimensions, technical specifications, and installation details. For components within propulsion, exhaust, cooling, sanitation, or maneuvering systems, compatibility with the surrounding equipment should also be checked before ordering.
If the original part number is unavailable, information from the existing equipment label, installation manual, or VETUS catalogue can help identify a suitable replacement or compatible alternative.