VETUS develops marine equipment and onboard systems for leisure boats, yachts, and small commercial vessels. Its product range covers propulsion and maneuvering, exhaust and cooling systems, fuel and freshwater equipment, ventilation, hatches and portlights, pumps, hoses, deck equipment, electrical components, and a wide selection of spare parts.
Download VETUS Catalogue (English)
At Yacht-Supply24.com, we supply VETUS marine equipment and spare parts for new installations, maintenance, replacement, and upgrade projects. We can also assist with product selection, spare part identification, and finding suitable alternatives for existing VETUS systems.
Send us your request if you need help selecting the correct VETUS product or replacement part.
|
1-2 weeks delivery time The Vetus STM7553 keelcooler manifold assembly is intended for use with Vetus M4.15 and M4.17 marine engines to support efficient cooling and help maintain operating temperature under marine operating conditions. It is supplied as a spare part within the Vetus marine engine spare parts range. |
$ 670.04
-
+
|
|
1-2 weeks delivery time The Vetus STM7554 keel cooler manifold assembly is a complete cooling-system manifold unit intended for Vetus M4.15, M4.17, M4.35, M4.45, M4.55, and M4.56 marine engines. Supplied as a spare part for Vetus marine engine installations, it supports efficient cooling to help maintain normal engine operating temperature. |
$ 1,167.78
-
+
|
|
1-2 weeks delivery time The Vetus STM7557 exhaust injection elbow assembly is an exhaust system component intended for Vetus M4.15 and M4.17 marine engines. It is used to facilitate exhaust injection to support efficient exhaust operation in marine engine applications and is supplied within the Spare Parts range for Vetus marine engines. |
$ 526.45
-
+
|
|
1-2 weeks delivery time The Vetus STM7558 exhaust elbow sealing gasket is a replacement component for Vetus M4.15 and M4.17 yellow marine engines, intended to provide a proper seal at the exhaust elbow interface. By preventing exhaust leakage at the elbow joint, this gasket supports correct exhaust system integrity as part of Vetus marine engine spare parts. |
$ 8.13
-
+
|
|
1-2 weeks delivery time The Vetus STM7559 thermostat housing cover component is used in the engine cooling circuit to regulate marine engine temperature by controlling coolant flow through the thermostat housing. It is specified for Vetus M4.15, M4.17, M4.35, M4.45, M4.55, and M4.56 engine models and is described for use in both propulsion systems and generator installations as part of Vetus marine engine spare parts support. |
$ 86.15
-
+
|
|
1-2 weeks delivery time The Vetus STM7560 thermostat housing hose component is engineered to provide a secure, dependable connection for a marine engine thermostat. Built with durable construction, it supports correct thermostat system operation and temperature regulation within Vetus marine engine cooling arrangements and is supplied as a spare part for Vetus marine engines. |
$ 5.74
-
+
|
|
1-2 weeks delivery time The Vetus STM7561 hose assembly is a raw-water circulation line used in marine engine cooling circuits as the connection between the seawater pump and the heat exchanger. It is specified for M4.15-17 applications and supports engine cooling by ensuring seawater flow through the heat exchanger. |
$ 28.53
-
+
|
|
1-2 weeks delivery time The Vetus STM7562 hose assembly is intended for marine use as a fluid-circulation line associated with a pump or an oil cooler. Identified as a spare part for Vetus marine engines, it is specified as a component supporting efficient circulation of fluids for proper equipment operation. |
$ 40.21
-
+
|
|
1-2 weeks delivery time The Vetus STM7563 hose assembly is engineered for marine installations to connect the oil cooler to the heat exchanger, facilitating heat transfer between these cooling system elements. It is supplied as a spare part for Vetus marine engine systems and is intended to support proper thermal management in service. |
$ 49.78
-
+
|
|
1-2 weeks delivery time The Vetus STM7564 clamping component RSGU1.30/20W1 is intended to secure circulator pump connections in keel cooling systems for Vetus M4.15 and M4.17 engine installations manufactured from 2006 onwards. It is specified as a spare part for Vetus marine engine systems and is used to maintain a reliable, leak-resistant connection at the pump interface. |
$ 3.45
-
+
|
|
1-2 weeks delivery time The Vetus STM7566 flywheel housing assembly is a gearbox interface component for the Vetus M4 marine engine, specified with an 88 mm diameter. It is intended to provide support for the flywheel and maintain a secure fit at the gearbox side as part of Vetus marine engine spare parts. |
$ 315.88
-
+
|
|
1-2 weeks delivery time The Vetus STM7567 flywheel housing component is built for the SAE7 configuration of the M4 engine and is intended to provide a precise fit around the engine flywheel. It supports the flywheel interface to help maintain smooth engine operation and is supplied within the Spare Parts for Vetus Marine Engines category. |
$ 497.74
-
+
|
|
1-2 weeks delivery time The Vetus STM7568 support component is engineered to reinforce keel cooler manifold connections on Vetus M4.15 and M4.17 marine engine installations. Intended to stabilize critical connection points in the cooling system, it is specified for use in propulsion systems and auxiliary equipment to help maintain keel cooler connection integrity and reduce leak risk. |
$ 13.21
-
+
|
|
1-2 weeks delivery time The Vetus STM7570 engine support STB is an engine mounting support component intended to provide stability and alignment for Vetus marine engine installations. It is specified for M4.15, M4.17, M4.35, M4.45, M4.55, and M4.56 engine models and is described as helping to minimize vibrations in service. Category: Spare Parts for Vetus Marine Engines. |
$ 95.73
-
+
|
|
1-2 weeks delivery time The Vetus STM7571 engine support PS is an engine support component intended to provide stable positioning and secure attachment for marine engine installations. Listed for M4.15, M4.17, M4.35, M4.45, M4.55, and M4.56 applications, it is supplied within the Spare Parts for Vetus Marine Engines range. |
$ 105.29
-
+
|
|
1-2 weeks delivery time The Vetus STM7572 support component is a reinforcement and mounting element for fuel lift pump installations on Vetus M4.56 marine engines. It is intended to provide secure mounting and stability for the fuel lift pump within marine fuel delivery systems, supplied as a spare part for Vetus marine engine applications. |
$ 38.29
-
+
|
|
1-2 weeks delivery time The Vetus STM7573 air intake housing assembly is an engine air-intake component for Vetus M4.15 and M4.17 applications up to 06-2009, used to regulate intake airflow while providing sound insulation to reduce operating noise. It is specified as a Vetus-engine-specific spare part and is not intended to be substituted with components from other brands or models. |
$ 229.73
-
+
|
|
1-2 weeks delivery time The Vetus STM7577 throttle lever component is intended for precise and responsive throttle control in Vetus marine engine systems. It is specified for Vetus engine models M4.55 and M4.56 and is described as a durable lever designed to support smooth throttle adjustment for vessel maneuverability and efficient operation. |
$ 24.79
-
+
|
What are VETUS marine parts and accessories used for?
VETUS marine parts and accessories are used across a wide range of onboard systems, including propulsion, maneuvering, exhaust, cooling, fuel, freshwater, sanitation, ventilation, steering, and deck equipment. They are suitable for new installations as well as maintenance, repair, replacement, and upgrade work on leisure boats, yachts, and small commercial vessels.
Many VETUS components are designed as part of complete onboard systems, making it easier to match replacement parts and maintain compatibility with existing installations.
Why are VETUS components commonly used in integrated onboard systems?
VETUS develops complete marine systems rather than isolated components, allowing products such as thrusters, exhaust components, cooling equipment, pumps, hoses, control panels, and related accessories to work together within the same installation. This system-based approach can simplify product selection, installation, servicing, and replacement when maintaining an existing VETUS setup.
How can the correct VETUS replacement part be selected?
The correct VETUS replacement part should be selected using the existing product model, part number, dimensions, technical specifications, and installation details. For components within propulsion, exhaust, cooling, sanitation, or maneuvering systems, compatibility with the surrounding equipment should also be checked before ordering.
If the original part number is unavailable, information from the existing equipment label, installation manual, or VETUS catalogue can help identify a suitable replacement or compatible alternative.