VETUS develops marine equipment and onboard systems for leisure boats, yachts, and small commercial vessels. Its product range covers propulsion and maneuvering, exhaust and cooling systems, fuel and freshwater equipment, ventilation, hatches and portlights, pumps, hoses, deck equipment, electrical components, and a wide selection of spare parts.
Download VETUS Catalogue (English)
At Yacht-Supply24.com, we supply VETUS marine equipment and spare parts for new installations, maintenance, replacement, and upgrade projects. We can also assist with product selection, spare part identification, and finding suitable alternatives for existing VETUS systems.
Send us your request if you need help selecting the correct VETUS product or replacement part.
|
1-2 weeks delivery time The Vetus STM6961 engine panel upgrade/fitting kit is a sensor installation kit for M4-series marine engines, supplied excluding the panel. It includes the required sensors, thread adapters, and washers to enable installation of oil pressure and coolant temperature sensors for engine monitoring on M4.15, M4.17, M4.35, M4.45, M4.55, and M4.56 applications. |
$ 580.70
-
+
|
|
1-2 weeks delivery time The Vetus STM6962 motor panel upgrade kit is an engine panel fitting kit for VH4.65 and VH4.80 engines, supplied as a comprehensive set of components to support installation of the MP34 engine panel. The kit is specified as excluding the panel and is intended for engine control panel installation within Vetus marine engine spare parts applications. |
$ 489.45
-
+
|
|
1-2 weeks delivery time The Vetus STM6968 single-pole engine wiring harness assembly is manufactured by Vetus for DT(A)66 Deutz engine applications, providing electrical connectivity within the engine system. Supplied as a spare part for Vetus marine engine installations, it is specified as an engine wiring harness with a single pole configuration for DT(A)66 Deutz engines. |
$ 574.32
-
+
|
|
1-2 weeks delivery time The Vetus STM6969 double-pole engine wiring loom is a specialized wiring harness for Deutz DT(A)44 engines, intended for integration into DT(A)44-66 engine installations. It uses a double-pole configuration to support electrical connections and power distribution for smooth engine operation in marine environments and is supplied as a spare part for Vetus marine engines. |
$ 765.75
-
+
|
|
1-2 weeks delivery time The Vetus STM7002 adaptor component is intended to facilitate compatibility and secure connections within various marine engine systems. The provided data specifies durable, corrosion-resistant materials and a design intended to provide a secure and stable connection, with straightforward installation and integration into existing setups. |
$ 28.71
-
+
|
|
1-2 weeks delivery time The Vetus STM7003 bolt fastener is an M7x20mm fastening component specified for marine applications where secure mechanical retention is required. Manufactured by Vetus, this spare part is supplied under model STM7003 and is listed within spare parts for Vetus marine engines. |
$ 2.10
-
+
|
|
1-2 weeks delivery time The Vetus STM7009 fastening bolt is an M10x75 fastener manufactured to DIN931 and specified for secure installation work on Saildrive ZF SD10 systems manufactured from June 2020 onwards. It is supplied as a Vetus spare part intended to maintain fastening integrity in marine equipment assemblies. |
$ 4.78
-
+
|
|
1-2 weeks delivery time The Vetus STM7010 stainless steel Allen screw is an M8x16 fastener manufactured to DIN912, specified for securing protection covers. It is supplied as a Vetus spare part for marine engine applications, with stainless steel construction for corrosion resistance in marine environments. |
$ 3.83
-
+
|
|
1-2 weeks delivery time The Vetus STM7013 sealing gasket (packing) is a Vetus spare part intended to provide a secure seal for marine equipment. Identified as a gasket for P4.25, it is described for use across various marine applications, including engine components and plumbing fixtures, with the purpose of preventing leaks and maintaining system integrity. |
$ 5.74
-
+
|
|
1-2 weeks delivery time The Vetus STM7023 adaptor-plate gasket component is a gasket adaptor plate specified for the P4.25 raw water pump, intended to provide a secure seal within the raw water pump system to help prevent leaks. Identified as a Vetus spare part, it is supplied under model STM7023 and categorized under spare parts for Vetus marine engines. |
$ 5.94
-
+
|
|
1-2 weeks delivery time The Vetus STM7024 sealing gasket is a Vetus spare part intended to provide a tight, secure seal for marine systems, helping prevent leakage and maintain system integrity. Identified as a gasket type component, it is specified for use across various marine applications including engine components, plumbing fixtures, and other marine equipment. |
$ 5.74
-
+
|
|
1-2 weeks delivery time The Vetus STM7031 M12 nut is a precision-engineered fastening component intended for marine gearbox applications, used to support secure mounting of gearbox parts. It is specified as compatible with gearbox models DT44, DT66, DET44, DET66, DTA44, DTA66, DETA44, DETA66, DT43, DTA43, DT64, and DTA64. |
$ 2.88
-
+
|
|
1-2 weeks delivery time The Vetus STM7051 bronze knee elbow component is intended for use with the M4.14 raw water pump as part of marine fluid transfer and redirection duties. Manufactured from bronze, this elbow supports secure fluid flow in cooling systems and other onboard applications requiring controlled change of flow direction and a precise pump-side fit. |
$ 17.23
-
+
|
|
1-2 weeks delivery time The Vetus STM7052 pipe component is intended for fluid handling duties in marine and industrial environments, supporting conveyance of water, fuel, and other liquids. It is described as corrosion- and wear-resistant with durable construction, and is specified for straightforward installation and maintenance as part of a fluid transfer system within the Spare Parts for Vetus Marine Engines category. |
$ 17.23
-
+
|
|
1-2 weeks delivery time The Vetus STM7054 O-ring sealing component is a precision-crafted gasket element intended to support leak-proof connections across marine systems and other general applications where effective sealing is required. It is described as durable for long-lasting service and is supplied as a spare part for Vetus marine engines. |
$ 2.88
-
+
|
|
1-2 weeks delivery time The Vetus STM7055 mechanical fuel lift pump (feed pump) is a fuel-system component intended to support consistent fuel delivery on Vetus marine engines in the 2.05–4.25 liter displacement range, including M2.05, M3.10, M4.14, and P4 applications. Supplied as a spare part for Vetus marine engines, it is specified to optimize the fuel delivery system to promote reliable engine operation. |
$ 269.61
-
+
|
|
1-2 weeks delivery time The Vetus STM7056 M12 copper sealing washer is a seal washer intended for expansion tank interfaces on Vetus marine engines, specified to support a tight, secure fit for leak prevention and pressure retention in the system. It is listed as compatible with DET.44, DT4.70, DTA4.85, M2.02, M2.04, M2.06, M2.C5, M2.D5, and M3.09 engine applications and is supplied as a spare part for Vetus marine engines. |
$ 3.32
-
+
|
|
1-2 weeks delivery time The Vetus STM7058 clamp plate assembly is a Vetus fastening component (also referenced as “Klemmplatte”) intended for general marine applications where secure clamping, stabilization, or mounting support is required. Identified as type Clamp Plate, it is supplied as a spare part for Vetus marine engines and associated vessel system installations. |
$ 7.56
-
+
|
What are VETUS marine parts and accessories used for?
VETUS marine parts and accessories are used across a wide range of onboard systems, including propulsion, maneuvering, exhaust, cooling, fuel, freshwater, sanitation, ventilation, steering, and deck equipment. They are suitable for new installations as well as maintenance, repair, replacement, and upgrade work on leisure boats, yachts, and small commercial vessels.
Many VETUS components are designed as part of complete onboard systems, making it easier to match replacement parts and maintain compatibility with existing installations.
Why are VETUS components commonly used in integrated onboard systems?
VETUS develops complete marine systems rather than isolated components, allowing products such as thrusters, exhaust components, cooling equipment, pumps, hoses, control panels, and related accessories to work together within the same installation. This system-based approach can simplify product selection, installation, servicing, and replacement when maintaining an existing VETUS setup.
How can the correct VETUS replacement part be selected?
The correct VETUS replacement part should be selected using the existing product model, part number, dimensions, technical specifications, and installation details. For components within propulsion, exhaust, cooling, sanitation, or maneuvering systems, compatibility with the surrounding equipment should also be checked before ordering.
If the original part number is unavailable, information from the existing equipment label, installation manual, or VETUS catalogue can help identify a suitable replacement or compatible alternative.