VETUS develops marine equipment and onboard systems for leisure boats, yachts, and small commercial vessels. Its product range covers propulsion and maneuvering, exhaust and cooling systems, fuel and freshwater equipment, ventilation, hatches and portlights, pumps, hoses, deck equipment, electrical components, and a wide selection of spare parts.
Download VETUS Catalogue (English)
At Yacht-Supply24.com, we supply VETUS marine equipment and spare parts for new installations, maintenance, replacement, and upgrade projects. We can also assist with product selection, spare part identification, and finding suitable alternatives for existing VETUS systems.
Send us your request if you need help selecting the correct VETUS product or replacement part.
|
1-2 weeks delivery time The Vetus STM6140 heat exchanger housing assembly is a replacement cooling-system component for Vetus M2 Series marine engines, including M2.C5, M2.D5, M2.04, and M2.06. Supplied as a direct-fit spare part, it is intended to maintain efficient heat exchange performance within the engine cooling circuit and serves as the original-type housing for the heat exchanger on the specified M2 Series applications. |
$ 794.47
-
+
|
|
1-2 weeks delivery time The Vetus STM6142 intercooler heat exchanger complete housing (Version 2) is a marine engine cooling component intended to provide optimal cooling for Vetus M2 series engines. It is specified as compatible with M2.02, M2.04, M2.06, M2.C5, M2D5, M2.13, and M2.18, and is supplied as a spare part for Vetus marine engines. |
$ 1,627.23
-
+
|
|
1-2 weeks delivery time The Vetus STM6146 spacing component is a spacer intended to support accurate spacing and alignment in assembly work. It is specified as compatible with the M2.04, M2.06, M2.C5, and M2.D5 models and is listed for use in bedradingskast and terminal box applications (2001 and beyond) as part of spare parts for Vetus marine engines. |
$ 9.58
-
+
|
|
1-2 weeks delivery time The Vetus STM6147 threaded fastener is an M10 bolt with 1.5 mm pitch and 12 mm length, supplied as a spare part for Vetus marine engine installations. It is specified as a Bolt M10 x 1.5 x 12 and listed as compatible with M2.02, M2.04, M2.06, M2.C5, M2.D5, and M3.09 models. |
$ 2.10
-
+
|
|
1-2 weeks delivery time The Vetus STM6152 sealing gasket is an exhaust elbow gasket specified for Vetus M2 and M3 engine installations, intended to provide a secure seal at the exhaust elbow interface to prevent exhaust leakage during operation. Compatibility is stated for M2.C5, M2.D5, M2.06, M3.09, and M3.28 engines within the Vetus marine engine spare parts range. |
$ 8.62
-
+
|
|
1-2 weeks delivery time The Vetus STM6155 fastening bolt (M6 x 35) is specified for securing circulation pump mounting on Vetus M2 and M3 engine installations. Supplied as a spare part for Vetus marine engines, it provides a defined M6 thread size with a 35 mm length and is listed as compatible with M2.02, M2.04, M2.06, M2.C5, and M2.D5 engines. |
$ 2.10
-
+
|
|
1-2 weeks delivery time The Vetus STM6156 washer component is intended for EMR motor wiring ring installations and is specified for DET.44, DT4.70, and DTA4.85 ring applications. It is listed as compatible with Vetus M2 and M3 engine variants (M2.02, M2.04, M2.06, M2.C5, M2.D5, M3.09) and is described for use in marine engines and heat exchanger units where secure wiring connections are required. |
$ 2.10
-
+
|
|
1-2 weeks delivery time The Vetus STM6163 screw set is a 3-piece fastener kit intended for the M3.09 impeller pump cover, providing a precise fit to support secure cover retention and maintain pump system integrity. Supplied as a spare part for Vetus marine engine installations, it is specified as a specialized component for this impeller pump cover application. |
$ 19.15
-
+
|
|
1-2 weeks delivery time The Vetus STM6164 impeller pump cover assembly is a round raw water pump cover intended to provide protective housing for the VH4.80 impeller pump in marine applications. It is listed for use with M2.04, M2.06, C5, D5, and M3.09 engine-related installations and is supplied as a spare part for Vetus marine engines. |
$ 45.95
-
+
|
|
1-2 weeks delivery time The Vetus STM6165 sealing gasket (also referred to as the Vetus Wapu-Dichtung) is an engine sealing component specifically intended for use with the M3.09 engine. It is designed to provide a tight, leak-free seal between engine components and is supplied as a spare part for Vetus marine engine applications. |
$ 5.74
-
+
|
|
1-2 weeks delivery time The Vetus STM6167 screw set (3 pieces) is intended for use on the Vetus M3.09 engine, where it is used to secure engine components to support correct assembly and operation. This spare-part fastener set is also referenced as a Vetus Schraube in the provided product information. |
$ 19.15
-
+
|
|
1-2 weeks delivery time The Vetus STM6169 shaft lip seal is a raw water pump sealing component for Vetus M2 Yellow Engine series installations. It is specified to fit M2.C5, M2.D5, M2.04, and M20.6 models and is stated as compatible with both Johnson and Jabsco versions of the 1/2 Cam pump, supporting sealing integrity in the marine engine raw water system. |
$ 22.50
-
+
|
|
1-2 weeks delivery time The Vetus STM6170 retaining ring component is intended for the seawater pump assembly on M2.C5, M2.D5, M2.06, and M3.09 engines. It is used to secure and retain components within the pump assembly to maintain correct placement during operation as part of Vetus marine engine spare parts support. |
$ 5.65
-
+
|
|
1-2 weeks delivery time The Vetus STM6171 bearing component is a spare part for Vetus marine engine installations and is specified for use with M2.C5, M2.D5, M2.06, and M3.09 engines. It is described as a critical engine component intended to support smooth operation and durability within the applicable engine assemblies. |
$ 28.24
-
+
|
|
1-2 weeks delivery time The Vetus STM6172 retaining ring component is engineered for M2.C5, M2.D5, M2.06, and M3.09 marine engines, providing secure placement and retention of components within the engine assembly. Supplied as a spare part for Vetus marine engines, it supports reliable assembly retention for the specified engine models. |
$ 5.65
-
+
|
|
1-2 weeks delivery time The Vetus STM6173 seawater pump shaft is a raw water pump drive component intended for STM6109 pump applications on Vetus M2 and M3 marine engines. It is specified as compatible with M2.C5, M2.D5, M2.06, and M3.09 engine variants and is supplied as a spare part for Vetus marine engine installations. |
$ 124.44
-
+
|
|
1-2 weeks delivery time The Vetus STM6177 complete heat exchanger housing assembly (keel cooler manifold) is engineered for keel-cooled installations on M2.02, M2.04, M2.06, M2.C5, and M2.D5 engines. It is intended to facilitate heat exchange within the keel cooling system to support engine cooling performance, with spare parts noted as available for M2.04 and M2.06 applications. |
$ 689.18
-
+
|
|
1-2 weeks delivery time The Vetus STM6178 hose component is intended for Vetus M2.02, M2.04, M2.06, M2.C5, M2.D5, and M3.09 marine engines. It functions as a flexible line to facilitate the transfer of fluids or air between engine components to support correct system operation in marine engine installations. |
$ 24.06
-
+
|
What are VETUS marine parts and accessories used for?
VETUS marine parts and accessories are used across a wide range of onboard systems, including propulsion, maneuvering, exhaust, cooling, fuel, freshwater, sanitation, ventilation, steering, and deck equipment. They are suitable for new installations as well as maintenance, repair, replacement, and upgrade work on leisure boats, yachts, and small commercial vessels.
Many VETUS components are designed as part of complete onboard systems, making it easier to match replacement parts and maintain compatibility with existing installations.
Why are VETUS components commonly used in integrated onboard systems?
VETUS develops complete marine systems rather than isolated components, allowing products such as thrusters, exhaust components, cooling equipment, pumps, hoses, control panels, and related accessories to work together within the same installation. This system-based approach can simplify product selection, installation, servicing, and replacement when maintaining an existing VETUS setup.
How can the correct VETUS replacement part be selected?
The correct VETUS replacement part should be selected using the existing product model, part number, dimensions, technical specifications, and installation details. For components within propulsion, exhaust, cooling, sanitation, or maneuvering systems, compatibility with the surrounding equipment should also be checked before ordering.
If the original part number is unavailable, information from the existing equipment label, installation manual, or VETUS catalogue can help identify a suitable replacement or compatible alternative.