VETUS develops marine equipment and onboard systems for leisure boats, yachts, and small commercial vessels. Its product range covers propulsion and maneuvering, exhaust and cooling systems, fuel and freshwater equipment, ventilation, hatches and portlights, pumps, hoses, deck equipment, electrical components, and a wide selection of spare parts.
Download VETUS Catalogue (English)
At Yacht-Supply24.com, we supply VETUS marine equipment and spare parts for new installations, maintenance, replacement, and upgrade projects. We can also assist with product selection, spare part identification, and finding suitable alternatives for existing VETUS systems.
Send us your request if you need help selecting the correct VETUS product or replacement part.
|
1-2 weeks delivery time The Vetus STM3049 exhaust injection pipe assembly is specified for use with STM3076 and is supplied as a spare part for Vetus marine engines. The provided information identifies it as an exhaust injection pipe component within the Vetus marine engine spare parts category. |
$ 287.16
-
+
|
|
1-2 weeks delivery time The Vetus STM3050 tube bundle assembly is a genuine tube stack component for heat exchangers, specified for Vetus M3.10 marine engines manufactured after 1987. It is intended to support efficient heat transfer within the heat exchanger as part of the engine cooling system and is supplied as a spare part for Vetus marine engine applications. |
$ 670.04
-
+
|
|
1-2 weeks delivery time The Vetus STM3051 thermostat housing component is intended for Vetus M3.10 and M4.14 engines, providing the mounting interface required for correct thermostat installation within the engine cooling system. This housing supports thermostat operation for temperature regulation as part of the marine engine cooling circuit and is supplied as a spare part for Vetus marine engines. |
$ 28.71
-
+
|
|
1-2 weeks delivery time The Vetus STM3056 hose clamp component is intended for securing hoses in marine environments and is described as suitable for a variety of hose sizes. It is designed to be easy to install and adjust, providing a secure and stable fit for general hose management and maintenance tasks. |
$ 3.83
-
+
|
|
1-2 weeks delivery time The Vetus STM3057 hose pillar fitting is a brass hose connection component with a G 3/8 threaded interface and a Ø13 mm hose connection, specified for use with the Tilt Kit. It is intended to provide a secure hose-to-thread transition for marine fluid transfer applications. |
$ 5.74
-
+
|
|
1-2 weeks delivery time The Vetus STM3058 thermostat unit is a replacement temperature-regulating component for Vetus M3.10 and M4.14 marine engine cooling systems. It is specified with a 52 mm diameter and an 82°C temperature setting to control coolant temperature within the engine’s cooling circuit. |
$ 41.48
-
+
|
|
1-2 weeks delivery time The Vetus STM3060 threaded stud component is an M8x20 fastener manufactured to DIN 938, intended for securing components and assemblies in marine systems. Supplied as a spare part for Vetus marine engines, it is specified as a Stud M8X20 DIN938 and referenced for M3.10 and M4.14 applications. |
$ 3.83
-
+
|
|
1-2 weeks delivery time The Vetus STM3061 clamping component is a Vetus clamp (also referred to as Vetus Schelle) intended to securely fasten hoses, cables, or other items in marine and industrial environments. It is described as a durable, precision-made spare part used to provide stable fixation under challenging operating conditions within Vetus marine engine spare parts applications. |
$ 4.78
-
+
|
|
1-2 weeks delivery time The Vetus STM3066 pipe clamp component is a 12.7 mm diameter fastening clamp intended for use with the Terminal Box 2001. It is specified for securing pipes and providing reliable mechanical support in marine and industrial applications and is supplied within the spare parts range for Vetus marine engines. |
$ 2.88
-
+
|
|
1-2 weeks delivery time The Vetus STM3071 plug component is a 3/8 in sealing plug intended for closure of fluid systems in marine and industrial applications. It is used to provide secure sealing to help prevent leaks and maintain system integrity and is supplied within the spare parts range for Vetus marine engines. |
$ 2.88
-
+
|
|
1-2 weeks delivery time The Vetus STM3076 exhaust injection elbow assembly is a complete exhaust system component intended for the M3.10 Mitsubishi marine engine. This elbow supports efficient exhaust injection to maintain engine performance and emissions control and is supplied as a spare part for Vetus marine engine exhaust installations. |
$ 392.45
-
+
|
|
1-2 weeks delivery time The Vetus STM3091 moulded hose assembly is a one-piece circulation hose intended for the water pump/heat exchanger connection on Vetus M3.10 and M4.14 marine engines. It is engineered as a replacement for the original bends and connecting metal pipe to support efficient water circulation for engine cooling, and it replaces parts STM3009, STM3055, and STM3053. |
$ 47.66
-
+
|
|
1-2 weeks delivery time The Vetus STM3092 water pump hose assembly is engineered for M3 and M4 marine engines to support water circulation within the engine cooling system. Supplied as a spare part for Vetus marine engine installations, this hose is specified for water pump service on the listed engine models. |
$ 13.40
-
+
|
|
1-2 weeks delivery time The Vetus STM3093 exhaust injection bend pipe is a molded rubber injection bend replacement component intended for use with Vetus M3.10 and M4.14 heat exchangers. It is used to support efficient exhaust injection and is supplied as a spare part for Vetus marine engine heat exchanger system applications. |
$ 12.44
-
+
|
|
1-2 weeks delivery time The Vetus STM3094 thermostat housing hose is a coolant hose component for Vetus M3.10 and M4.14 Mitsubishi-based yellow marine engines, specified as a direct replacement for part STM3052. It is identified as Part No. 24 on Page 4, Group 3 of the M3.10/M4.14 Parts Catalogue (STM0035) and is intended to maintain correct coolant flow through the thermostat housing circuit. |
$ 20.74
-
+
|
|
1-2 weeks delivery time The Vetus STM3212 pinion gear set is a precision-engineered transmission component intended for power transmission duties in marine and automotive mechanical systems. It comprises gears designed to support efficient torque transfer, contributing to smooth operation and maintaining system performance in applicable installations. |
$ 114.86
-
+
|
|
1-2 weeks delivery time The Vetus STM3229 carbon brush component is intended for use in electrical machinery and equipment, supporting conductivity and operational performance in applicable electrical systems. It is supplied as a spare part within the Vetus marine engine spare parts category and is described as precision-crafted for conductivity and performance across a wide range of applications. |
$ 12.44
-
+
|
|
1-2 weeks delivery time The Vetus STM3243 rotor assembly is a specialized alternator component intended for use with the Vetus M4.14 alternator. This rotor assy is supplied as a spare part for Vetus marine engine systems and is stated as suitable for both marine and industrial applications. |
$ 189.05
-
+
|
What are VETUS marine parts and accessories used for?
VETUS marine parts and accessories are used across a wide range of onboard systems, including propulsion, maneuvering, exhaust, cooling, fuel, freshwater, sanitation, ventilation, steering, and deck equipment. They are suitable for new installations as well as maintenance, repair, replacement, and upgrade work on leisure boats, yachts, and small commercial vessels.
Many VETUS components are designed as part of complete onboard systems, making it easier to match replacement parts and maintain compatibility with existing installations.
Why are VETUS components commonly used in integrated onboard systems?
VETUS develops complete marine systems rather than isolated components, allowing products such as thrusters, exhaust components, cooling equipment, pumps, hoses, control panels, and related accessories to work together within the same installation. This system-based approach can simplify product selection, installation, servicing, and replacement when maintaining an existing VETUS setup.
How can the correct VETUS replacement part be selected?
The correct VETUS replacement part should be selected using the existing product model, part number, dimensions, technical specifications, and installation details. For components within propulsion, exhaust, cooling, sanitation, or maneuvering systems, compatibility with the surrounding equipment should also be checked before ordering.
If the original part number is unavailable, information from the existing equipment label, installation manual, or VETUS catalogue can help identify a suitable replacement or compatible alternative.