VETUS develops marine equipment and onboard systems for leisure boats, yachts, and small commercial vessels. Its product range covers propulsion and maneuvering, exhaust and cooling systems, fuel and freshwater equipment, ventilation, hatches and portlights, pumps, hoses, deck equipment, electrical components, and a wide selection of spare parts.
Download VETUS Catalogue (English)
At Yacht-Supply24.com, we supply VETUS marine equipment and spare parts for new installations, maintenance, replacement, and upgrade projects. We can also assist with product selection, spare part identification, and finding suitable alternatives for existing VETUS systems.
Send us your request if you need help selecting the correct VETUS product or replacement part.
|
1-2 weeks delivery time The Vetus STM1060 sealing element is a rubber seal specified for Vetus M3.10 and M3.14 heat exchanger old models. Supplied with dimensions of 61x57x5 mm, it is intended to provide a secure seal within the heat exchanger system as part of Vetus marine engine spare parts. |
$ 28.71
-
+
|
|
1-2 weeks delivery time The Vetus STM1062 copper sealing washer is an M14 CU ring designed as a leak-prevention sealing component for Vetus DT43, DTA43, DT64, DTA64, D4.29, and DT4.29 engines. Manufactured from copper, this washer is specified for engine maintenance and repair tasks where effective sealing is required to maintain the integrity of Vetus marine engine systems. |
$ 2.30
-
+
|
|
1-2 weeks delivery time The Vetus STM1087 piston ring set assembly is a standard-size ring set intended for Vetus M2.C5 and D5 marine engines. Supplied as a spare part for Vetus marine engine service, it is specified for sealing duties in the piston/liner interface to support correct engine operation and maintenance. |
$ 143.58
-
+
|
|
1-2 weeks delivery time The Vetus STM1088 crankshaft assembly is a precision-engineered rotating engine component intended for Vetus M2.C5 and M2.D5 marine engines. It provides the rotational motion required to drive engine components and is supplied as a spare part for Vetus marine engine propulsion system applications. |
$ 153.15
-
+
|
|
1-2 weeks delivery time The Vetus STM1089 crankshaft assembly is an engine internal component specified for Vetus M2.C5 and M2.D5 engines, providing the rotational motion required to drive engine components for smooth and reliable operation. Listed as a spare part for Vetus marine engines, it is intended for propulsion system service work on the stated engine models. |
$ 168.47
-
+
|
|
1-2 weeks delivery time The Vetus STM1090 piston set consists of standard-size piston components intended for Vetus M2.C5 and M2.D5 marine engines. Manufactured to precision standards and standard dimensions as stated, these pistons are used for engine maintenance and repair to support reliable engine operation in marine propulsion applications. |
$ 248.88
-
+
|
|
1-2 weeks delivery time The Vetus STM1091 piston component is a 0.25 oversize (OS) piston specified for Vetus M2.C5 and M2.D5 engines. It is supplied as a spare part for Vetus marine engine applications and is also referenced for use in industrial engine settings where these engine models are installed. |
$ 373.30
-
+
|
|
1-2 weeks delivery time The Vetus STM1095 cylinder head sealing gasket is engineered for Vetus marine engines M2.02, M2.04, M2.06, M2.C5, and M2.D5, providing a secure interface seal between the cylinder head and the engine block. It is specified to prevent leaks and support correct engine operation as a service spare part for Vetus marine engine applications. |
$ 160.81
-
+
|
|
1-2 weeks delivery time The Vetus STM1096 gasket set assembly is intended for Vetus M2.C5 and M2.D5 marine engines and comprises the essential gaskets required for engine maintenance and repair. The set is specified as comprehensive and is used to ensure proper sealing of engine components, supporting reliability and durability during service work. |
$ 335.01
-
+
|
|
1-2 weeks delivery time The Vetus STM1097 connecting rod assembly is a marine engine internal component specified for M329 engine models M2.C5 and M.2D5. Identified as “Rod Cpl M2.06/M3.09 21mm Small End,” it is manufactured by Vetus as a spare part intended to provide precise connectivity within the engine system for the listed compatible engine models. |
$ 301.52
-
+
|
|
1-2 weeks delivery time The Vetus STM1098 injection fuel pump assembly is engineered for Vetus M2.C5 and M2.D5 marine engines and functions as a critical element of the fuel delivery system. It is intended to meter and deliver fuel to the engine cylinders to support efficient combustion and stable engine operation, supplied as a spare part for Vetus marine engine maintenance and repair. |
$ 1,962.25
-
+
|
|
1-2 weeks delivery time The Vetus STM1101 sealing component is a seal designed for use on Vetus M2.02, M2.04, M2.06, M2.C5, M2.D5, and M3.09 marine engines. It is specified as a high-quality part intended to provide reliable sealing integrity to help prevent leakage, and it is described as easy to install and replace within Vetus marine engine spare parts applications. |
$ 8.62
-
+
|
|
1-2 weeks delivery time The Vetus STM1102 tapper plug component is engineered for precision sealing within the engine block on Vetus M2-series engines, including M2.02, M2.04, M2.06, M2.C5, M2.13, M2.18, and M2.D5. Intended for marine and industrial conditions, it prevents leaks to maintain engine integrity and supports reliable engine functionality as a spare part for Vetus marine engines. |
$ 4.78
-
+
|
|
1-2 weeks delivery time The Vetus STM1103 dipstick guide assembly is intended for oil level measurement on Vetus marine engines and is specified for M2.02, M2.04, M2.06, M2.C5, and M2.D5 applications. It provides a method for easy and accurate monitoring of engine oil level to support correct lubrication and engine operation during routine maintenance and inspections. |
$ 9.58
-
+
|
|
1-2 weeks delivery time The Vetus STM1104 crankshaft backside shaft oil seal is a sealing component for Vetus M2 and M3 engine products, intended to provide effective sealing to prevent oil leakage. It is specified for use with M2.04 and M2.06 engines and is also listed as compatible with M2.02, M2.C5, and M2.D5 engines in Vetus marine propulsion system applications. |
$ 56.42
-
+
|
|
1-2 weeks delivery time The Vetus STM1106 crankshaft bearing bolt is a precision-engineered fastener intended for Vetus crankshaft bearing assemblies on M2.02 through M3.09 marine engines. It is specified for use with Vetus crankshafts in M2.02, M2.04, M2.06, M2.C5, M2.D5, and M3.09 engines, supporting stability and correct function of the crankshaft bearing system in marine service. |
$ 13.40
-
+
|
|
1-2 weeks delivery time The Vetus STM1108 cylinder head cap plug component is an M4 plug with a 25.25 mm diameter, intended to provide sealing and closure in marine applications. Identified by article number STM1108, it is specified as a cap in cylinder head and is described for use across plumbing, electrical, and mechanical systems where a secure fit helps maintain system integrity. |
$ 6.23
-
+
|
|
1-2 weeks delivery time The Vetus STM1109 plug component is a 40.4 mm diameter sealing and closure part intended for various onboard marine applications, including use within plumbing, electrical, and mechanical systems. It is specified as compatible with Vetus engines M2.02, M2.04, M2.06, M2.C5, M2.D5, and M3.09, providing a secure fit to support system integrity during operation and maintenance. |
$ 12.44
-
+
|
What are VETUS marine parts and accessories used for?
VETUS marine parts and accessories are used across a wide range of onboard systems, including propulsion, maneuvering, exhaust, cooling, fuel, freshwater, sanitation, ventilation, steering, and deck equipment. They are suitable for new installations as well as maintenance, repair, replacement, and upgrade work on leisure boats, yachts, and small commercial vessels.
Many VETUS components are designed as part of complete onboard systems, making it easier to match replacement parts and maintain compatibility with existing installations.
Why are VETUS components commonly used in integrated onboard systems?
VETUS develops complete marine systems rather than isolated components, allowing products such as thrusters, exhaust components, cooling equipment, pumps, hoses, control panels, and related accessories to work together within the same installation. This system-based approach can simplify product selection, installation, servicing, and replacement when maintaining an existing VETUS setup.
How can the correct VETUS replacement part be selected?
The correct VETUS replacement part should be selected using the existing product model, part number, dimensions, technical specifications, and installation details. For components within propulsion, exhaust, cooling, sanitation, or maneuvering systems, compatibility with the surrounding equipment should also be checked before ordering.
If the original part number is unavailable, information from the existing equipment label, installation manual, or VETUS catalogue can help identify a suitable replacement or compatible alternative.