VETUS develops marine equipment and onboard systems for leisure boats, yachts, and small commercial vessels. Its product range covers propulsion and maneuvering, exhaust and cooling systems, fuel and freshwater equipment, ventilation, hatches and portlights, pumps, hoses, deck equipment, electrical components, and a wide selection of spare parts.
Download VETUS Catalogue (English)
At Yacht-Supply24.com, we supply VETUS marine equipment and spare parts for new installations, maintenance, replacement, and upgrade projects. We can also assist with product selection, spare part identification, and finding suitable alternatives for existing VETUS systems.
Send us your request if you need help selecting the correct VETUS product or replacement part.
|
1-2 weeks delivery time Vetus EPOLY30W is a set of white end pieces designed for POLY30 rubbing strake profiles. The end covers are dimensioned for a 30 × 26 mm profile and provide a finished termination for the rubbing strake installation. Supplied as a set for use with POLY30 systems. |
$ 13.12
-
+
|
|
1-2 weeks delivery time Vetus EPOLY35B is a set of black end pieces designed for POLY35 rubbing strake profiles. The end covers are dimensioned for a 35 × 28 mm profile and provide a finished termination for the rubbing strake installation. Supplied as a set for use with POLY35 systems. |
$ 13.12
-
+
|
|
1-2 weeks delivery time Vetus EPOLY35W is a set of white end pieces designed for POLY35 rubbing strake profiles. The end covers are dimensioned for a 35 × 28 mm profile and provide a finished termination for the rubbing strake installation. Supplied as a set for use with POLY35 systems. |
$ 13.12
-
+
|
|
1-2 weeks delivery time Vetus POLYSE is a set of two stainless steel end pieces designed for POLY4S rubbing strake profiles. The set provides a durable and professional termination of the rubbing strake installation and is intended for marine environments. |
$ 23.86
-
+
|
|
1-2 weeks delivery time Vetus STE4838 Vinyl Rubbing Strake, article STE4838, is a dark grey two-piece rubbing strake with a profile size of 48 × 38 mm, supplied as a 20-meter coil. The system consists of a light-grey base section that is fastened over the deck edge (5 mm), followed by a dark profile that snaps over the base to form a finished protective edge. |
$ 1,348.16
-
+
|
|
1-2 weeks delivery time Vetus STE4838L Vinyl Rubbing Strake, article STE4838L, is a dark grey two-piece rubbing strake with a profile size of 48 × 38 mm, supplied as a 30-meter coil. The system consists of a light-grey base section that is fastened over the deck edge (5 mm), followed by a dark profile that snaps over the base to form a finished protective edge with concealed fastenings. |
$ 2,022.24
-
+
|
|
1-2 weeks delivery time Vetus ROND4248 Vinyl Rubbing Strake, article ROND4248, is a dark grey vinyl rubbing strake designed for installation on steel tubes with a diameter of 42–48 mm. Supplied as a 20-meter coil, it is fixed using screws (not supplied). Inlay strips are ordered separately and are available only in 20 m or 30 m lengths in defined colours. |
$ 405.64
-
+
|
|
1-2 weeks delivery time Vetus ROND4248L Vinyl Rubbing Strake, article ROND4248L, is a dark grey vinyl rubbing strake designed for installation on steel tubes with a diameter of 42–48 mm. Supplied as a complete 30-meter coil, it is fixed using screws (not supplied). Inlay strips are ordered separately and are available only in 20 m or 30 m lengths in defined colours. |
$ 608.46
-
+
|
|
1-2 weeks delivery time The Vetus QJ05MC Water Scoop (article QJ05MC) is a marine intake fitting manufactured from AISI 316 stainless steel, designed for reliable water intake in onboard systems. It features a G3/8" thread, supports hoses with an inner diameter of 11 mm, has an overall height of 90 mm, and weighs 0.2 kg, making it suitable for compact and corrosion-resistant marine installations. |
$ 33.41
-
+
|
|
1-2 weeks delivery time The Vetus QJ05MD Water Scoop (article QJ05MD) is a marine intake fitting manufactured from AISI 316 stainless steel for use in onboard water systems. It features a G1/2" thread, supports hoses with an inner diameter of 12 mm, has an overall height of 88 mm, and weighs 0.3 kg, providing a compact and corrosion-resistant solution for marine installations. |
$ 36.98
-
+
|
|
1-2 weeks delivery time The Vetus QJ05MD Water Scoop (article QJ05MD) is a marine intake fitting made from AISI 316 stainless steel for use in onboard water systems. It is equipped with a G1/2" thread, supports hoses with an inner diameter of 12 mm, has a compact height of 88 mm, and weighs 0.3 kg, providing a durable and corrosion-resistant solution for marine installations. |
$ 44.14
-
+
|
|
1-2 weeks delivery time The Vetus QJ05MF Water Scoop (article QJ05MF) is a marine intake fitting manufactured from AISI 316 stainless steel for use in onboard water systems. It features a G1" thread, supports hoses with an inner diameter of 26 mm, has an overall height of 105 mm, and weighs 0.5 kg, providing a robust and corrosion-resistant solution for marine installations with increased flow requirements. |
$ 51.30
-
+
|
|
1-2 weeks delivery time The Vetus QJ05MG Water Scoop (article QJ05MG) is a marine intake fitting manufactured from AISI 316 stainless steel for use in onboard water systems. It features a G1 1/4" thread, supports hoses with an inner diameter of 33 mm, has an overall height of 103 mm, and weighs 0.6 kg, providing a robust and corrosion-resistant solution for high-capacity marine installations. |
$ 58.46
-
+
|
|
1-2 weeks delivery time The Vetus QJ05MH Water Scoop (article QJ05MH) is a marine intake fitting manufactured from AISI 316 stainless steel for use in onboard water systems. It features a G1 1/2" thread, supports hoses with an inner diameter of 39 mm, has an overall height of 108 mm, and weighs 0.7 kg, providing a durable and corrosion-resistant solution for high-capacity marine installations. |
$ 72.78
-
+
|
|
1-2 weeks delivery time The Vetus QJ05MI Water Scoop (article QJ05MI) is a marine intake fitting manufactured from AISI 316 stainless steel for use in onboard water systems. It features a G2" thread, supports hoses with an inner diameter of 51 mm, has an overall height of 122 mm, and weighs 1.0 kg, providing a robust and corrosion-resistant solution for high-capacity marine installations. |
$ 95.44
-
+
|
|
1-2 weeks delivery time The Vetus QH05MD Air Vent (article QH05MD) is a polished marine breather made from AISI 316 stainless steel, designed for ventilation of onboard systems. It features a G1/2" thread, supports hoses with an inner diameter of 16 mm, has a compact height of 83 mm, and weighs 0.1 kg. The unit is supplied without a flame arrester gauze and is intended for applications requiring a corrosion-resistant and compact vent fitting. |
$ 20.28
-
+
|
|
1-2 weeks delivery time The Vetus QH05ME Air Vent (article QH05ME) is a polished marine breather manufactured from AISI 316 stainless steel for ventilation of onboard systems. It features a G3/4" thread, supports hoses with an inner diameter of 21 mm, has a height of 86 mm, and weighs 0.2 kg. The unit is supplied without a flame arrester gauze and is designed for compact, corrosion-resistant marine installations. |
$ 20.28
-
+
|
|
1-2 weeks delivery time The Vetus QH05MF Air Vent (article QH05MF) is a polished marine breather manufactured from AISI 316 stainless steel for ventilation of onboard systems. It features a G1" thread, supports hoses with an inner diameter of 27 mm, has a height of 98 mm, and weighs 0.3 kg. The unit is supplied without a flame arrester gauze and is designed for corrosion-resistant marine installations requiring increased airflow capacity. |
$ 33.41
-
+
|
What are VETUS marine parts and accessories used for?
VETUS marine parts and accessories are used across a wide range of onboard systems, including propulsion, maneuvering, exhaust, cooling, fuel, freshwater, sanitation, ventilation, steering, and deck equipment. They are suitable for new installations as well as maintenance, repair, replacement, and upgrade work on leisure boats, yachts, and small commercial vessels.
Many VETUS components are designed as part of complete onboard systems, making it easier to match replacement parts and maintain compatibility with existing installations.
Why are VETUS components commonly used in integrated onboard systems?
VETUS develops complete marine systems rather than isolated components, allowing products such as thrusters, exhaust components, cooling equipment, pumps, hoses, control panels, and related accessories to work together within the same installation. This system-based approach can simplify product selection, installation, servicing, and replacement when maintaining an existing VETUS setup.
How can the correct VETUS replacement part be selected?
The correct VETUS replacement part should be selected using the existing product model, part number, dimensions, technical specifications, and installation details. For components within propulsion, exhaust, cooling, sanitation, or maneuvering systems, compatibility with the surrounding equipment should also be checked before ordering.
If the original part number is unavailable, information from the existing equipment label, installation manual, or VETUS catalogue can help identify a suitable replacement or compatible alternative.