Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Nanni Diesel 48300405 heat exchanger supports stable engine operating temperature by transferring heat out of the coolant circuit for effective marine cooling. Installed as part of the heat exchanger and exhaust manifold assembly, it is a direct-fit replacement for Nanni Diesel N4.38 engines, helping protect the engine from overheating under continuous load. |
$ 3,369.14
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 48300410 Keel Cooling Heat Exchanger is a spare heat exchanger designed for keel cooling systems on Nanni Diesel N3.30 engines. This component is identified as Part 2 in the reference diagram and is intended for direct replacement within the keel cooling circuit. |
$ 2,995.04
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 48300414 water outlet cover is a heat-exchanger cooling-system component that closes and protects the water outlet section within the heat exchanger spare parts assembly. Designed for N4.40 engines, it supports clean coolant routing and secure sealing at the outlet point to help maintain stable operating temperatures underway. |
$ 535.37
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 48300427 male-to-female reduction fitting adapts a 1 inch male connection to a 1/2 inch female connection within the turbocharger assembly, helping you route and connect turbocharger-related lines with the correct interface. It is used on Nanni Diesel N4.85 and N4.100 engines for a clean, OEM-style fit during service or replacement. |
$ 32.55
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 48300429 hollow bolt (1/2P) is a turbocharger assembly fastener designed to secure and seal the turbocharger connection points where a hollow, pass-through bolt is required. Built for correct fit within the turbocharger system, it supports dependable oil or fluid passage through the joint on N4.85 and N4.100 engines. |
$ 18.58
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 48325012 hose is a replacement line used within the heat exchanger circuit and included in the maintenance kit for selected Nanni marine diesel engines. Installed as part of the heat exchanger assembly, it supports stable coolant flow and dependable temperature control on 4.195HE, 4.200HE, and 4.220HE engines. |
$ 133.59
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 48328058 hose is a dedicated air-cooler circuit component that supports stable charge-air cooling on 5.250TDI engines. Installed within the air cooler assembly, it routes airflow through the cooling path to help maintain efficient combustion, consistent power delivery, and dependable operation under marine load. |
$ 83.04
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 48328059 hose is a dedicated line for the 5.250TDI engine installation, used within both the gearbox assembly and the turbo and exhaust mixer system. Designed as an OEM replacement, it supports reliable routing of engine fluids or gases where the hose connection is critical to keeping the drivetrain and exhaust-mixing circuits operating smoothly. |
$ 194.02
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 48328060 hose is a gearbox-system line designed to support reliable fluid routing within the gear box assembly on 5.250TDI engines. Built as an OEM replacement component, it helps maintain clean, controlled flow through the transmission circuit to support dependable shifting and marine drivetrain operation. |
$ 149.35
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 48328061 hose is a dedicated air-path component used within the air cooler assembly on 5.250TDI engines. It supports secure routing of charge-air flow through the cooling stage, helping maintain stable connections and consistent air delivery for reliable engine performance in marine duty. |
$ 84.52
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 48328069 hose is a dedicated flexible line used on 5.250TDI engines, appearing in both the cylinder head cover assembly and the turbo and exhaust mixer assembly. It supports secure fluid or gas routing between connected components, helping maintain stable engine operation and dependable connections in high-heat marine engine environments. |
$ 49.38
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 48328070 hose is a dedicated line used within the cylinder head cover assembly to support correct fluid or vapor routing on 5.250TDI engines. Built as an OEM-fit replacement, it helps maintain a tidy, secure connection at the cylinder head cover for dependable day-to-day operation in marine service. |
$ 45.07
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 48328071 hose is a dedicated line used within the cylinder head cover system on 3.100HE engines and the air filter assembly on N4.115 engines. Designed for clean, OEM-style routing, it supports stable airflow and crankcase-breather ventilation depending on the installation point, helping keep your engine bay organized and the connected components working as intended. |
$ 37.90
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 48328074 hose is a cooling-system connection hose used in the heat exchanger circuit, also referenced within the heat exchanger and exhaust manifold grouping on applicable installations. Designed for dependable coolant flow management and secure routing in the engine’s thermal-control system, it fits Nanni Diesel 4.330TDI, 4.340TDI, and N4.115 engines. |
$ 134.72
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 48328076 hose is a flexible air-charge connection used within the air cooler and intercooler assemblies to route compressed intake air reliably. Designed for OEM fit on Nanni marine diesel installations, it supports stable airflow and helps maintain consistent charge-air cooling performance on 4.330TDI, 4.340TDI, and N4.115 engines. |
$ 104.90
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 48328077 hose is a dedicated line for the gearbox oil cooler circuit, supporting stable transmission oil temperatures in marine propulsion use. Used within the gear box oil cooler assembly, it routes oil cooler flow on compatible Nanni installations including 4.330TDI and N4.115 engines, helping protect gearbox performance under sustained load. |
$ 156.89
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 48328078 hose is a dedicated line for the gearbox oil cooler circuit, helping route oil through the cooler to control transmission operating temperature. Used within the gearbox oil cooler assembly, it is a correct-fit replacement for Nanni 4.330TDI, 4.340TDI, and N4.115 marine engines to support stable lubrication performance and dependable power transmission. |
$ 111.75
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 48328079 hose is a flexible coolant-circuit line used within the heat exchanger system, including heat exchanger and exhaust manifold heat exchanger arrangements, on Nanni marine diesel installations. Designed as an OEM replacement hose for 4.330TDI, 4.340TDI, and N4.115 engines, it supports secure routing of coolant flow through the heat exchanger assembly for stable operating temperatures. |
$ 166.27
-
+
|
Where is the Nanni Diesel engine typically located on a yacht or vessel?
Nanni Diesel engines are commonly located in the engine compartment or engine room of yachts and vessels. These powerful marine engines are known for their reliability and are often installed below deck, providing propulsion and power for various onboard systems. Nanni Diesel offers a comprehensive range of engine parts and spare parts to ensure the continued performance of their engines in the demanding marine environment.
What spare parts catalog is available for Nanni Diesel engines?
Nanni Diesel provides an extensive spare parts catalog tailored to their engines, offering a wide array of genuine components. This comprehensive catalog includes parts for various engine models, such as Nanni Diesel marine engines, Nanni boat engines, Nanni generators, and heat exchangers. It covers critical components like filters, gaskets, pumps, belts, and more, making it a valuable resource for boat owners and technicians to easily identify and obtain the specific parts needed for maintenance, repairs, or replacements.
Nanni Diesel engines are strategically designed to fit within the engine compartment or dedicated engine room of yachts and vessels, optimizing space utilization while ensuring efficient performance. With a diverse lineup ranging from compact 10hp engines to powerful models, Nanni offers a comprehensive range of marine diesel engines tailored to suit varying vessel sizes and applications worldwide. Their commitment to quality extends to a full range of marine engine parts and spare parts, backed by extensive sales and customer support to assist boat owners in maintaining top-tier performance, whether at home or exploring the seas.
What types of maintenance are recommended for Nanni Marine Diesel Engines?
To ensure the optimal performance and longevity of Nanni Diesel engines, regular maintenance practices are crucial. This includes routine checks of engine components, changing filters and fluids at recommended intervals, inspecting and cleaning heat exchangers, and using genuine Nanni spare parts when replacements are needed. Following the manufacturer's guidelines outlined in the Nanni Diesel spare parts catalogue is essential for maintaining the engine's reliability and efficiency in marine applications.