Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Nanni Diesel 43360111 hollow screw is a dedicated fastener for the drain pump assembly, providing a secure, leak-controlled connection point within the pump circuit on N4.85 and N4.100 engines. With its M22 X P150 designation, it supports correct installation and dependable service performance in the engine’s draining system. |
$ 23.91
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 43363101 banjo bolt is a precision fastener for banjo-style fluid connections within the turbocharger exhaust mixer assembly on T6 series engines. With an M10x1.5 thread, it helps secure the banjo fitting to maintain a dependable, leak-resistant connection on Nanni Diesel T6.420TDI and T6.300 marine engines. |
$ 12.86
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 48100189 clamp is a secure retention fastener used across key cooling and drivetrain-related groups, including the gearbox oil cooler, air cooler, intercooler, and gearbox assemblies. It helps keep connected lines and fittings firmly clamped in place to support dependable operation on 4.330TDI, 4.340TDI, 5.250TDI, N4.115, T4.155, and 4.380TDI engines, including stern drive configurations for T4.155 and 4.380TDI. |
$ 33.79
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 48100570 RSGU Clamp 45 is a spare clamp designed to adapt the inlet hose to the elbow on Nanni Diesel N2.10 engines. This component is identified as Part 1 in the reference diagram and is intended for direct replacement within the engine intake connection. |
$ 8.08
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 48100789 air filter element protects the engine air intake by trapping airborne contaminants before they reach the induction system. Installed within the air filter assembly, it helps maintain clean airflow and supports consistent running on 4.330TDI and 4.340TDI marine diesel engines. |
$ 303.48
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 48100794 clamp is a secure fastening element used in the air cooler and intercooler assemblies, helping hold ducting and connections firmly in place under boost and vibration. Designed for Nanni marine diesel applications, it supports dependable charge-air plumbing on 4.330TDI and N4.115 engines to maintain stable airflow through the cooling circuit. |
$ 24.55
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 48100810 intercooler clamp is a securing fastener used within the intercooler assembly to keep charge-air connections tight under boost and vibration. Designed for OEM-fit servicing on T6.420TDI and T6.300 marine engines, it also suits the same engine models in stern drive configurations to help maintain stable hose seating and leak-free intercooler plumbing. |
$ 40.68
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 48100880 clamp is a securing fastener used in the gearbox oil cooler assembly, holding cooler lines or components firmly in place to help maintain stable oil cooling and reduce vibration-related wear. This clamp is applied across multiple Nanni installations, including gearbox oil cooler and gearbox cooler assemblies on 4.200TD, N4.60, N4.65, N4.85, and N4.100 engines. |
$ 32.52
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 48100894 hose clamp secures the turbocharger water hose in the turbocharger cooling circuit, helping maintain a tight, leak-resistant connection under heat and vibration. Designed for fitment on T4.270, T4.230, and T4.205 Standard engines, it supports dependable coolant flow to the turbocharger for stable operating temperatures. |
$ 9.55
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 48100940 copper gasket is a precision sealing element used within the turbocharger assembly to help maintain a tight, leak-resistant joint under heat and pressure. Sized 21.5x28x1, it is suited for N4.85 and N4.100 engines, supporting dependable turbocharger operation and clean, stable connections during service or overhaul. |
$ 11.26
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 48100944 air cooler clamp secures associated piping and connections within the N4.100 air cooler assembly, helping maintain a stable, leak-resistant installation under marine engine vibration. Designed for N4.85 and N4.107 engines, this clamp style includes a 34/20 size reference and an 8 screw mounting hole for dependable fastening where the air cooler system requires a positive hold. |
$ 15.36
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 48100945 hollow screw 8 P125 is a dedicated fastener used within the turbocharger assembly to support secure, leak-resistant connections under high heat and boost conditions. Designed for OEM fit on Nanni Diesel N4.85 and N4.100 marine engines, it helps maintain dependable turbocharger operation and stable engine performance. |
$ 9.94
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 48100953 sail drive coupling is a driveline connection component used within the flywheel housing assembly to transfer torque smoothly from the engine to the sail drive interface. Built for dependable alignment and power transmission, it is specified for N2.10, N2.14, and N3.21 Sail Drive engines where a secure coupling at the flywheel housing is essential for efficient propulsion. |
$ 1,367.52
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 48101008 air cleaner is a filtration component used in the Air Filter and PCV assembly to help keep intake air clean for efficient combustion. Designed for T4.270 and T4.230 engines, it supports engine protection by reducing the ingress of dust and airborne contaminants into the air intake system. |
$ 295
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 48108036 alternator drive belt is built to transmit engine power to the alternator reliably, helping maintain stable battery charging underway. Installed within the alternator assembly, this belt is a direct-fit replacement for N4.85 and N4.100 engines to keep the charging system operating smoothly. |
$ 38.50
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 48108082 alternator drive belt is a V-belt used within the alternator system and maintenance kit on Nanni Diesel 4.330TDI and 4.340TDI engines. Designed to transmit power from the engine to the alternator, it helps maintain stable battery charging and reliable onboard electrical performance under typical marine operating loads. |
$ 103.08
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 48108141 alternator drive V-belt provides dependable power transmission within the standard alternator assembly, keeping the alternator driven smoothly and consistently. Designed for N4.115 engines, this belt supports stable charging performance by maintaining proper belt-driven rotation under typical marine engine loads. |
$ 28.92
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 48170000 fuel filter bracket is a mounting support component that secures the fuel filter installation for stable, service-friendly operation. Used within the filter support and speed control assemblies, it helps keep the fuel filtration hardware firmly positioned on T6.420TDI and T6.300 engines, including stern drive applications where vibration-resistant mounting is especially important. |
$ 982.02
-
+
|
Where is the Nanni Diesel engine typically located on a yacht or vessel?
Nanni Diesel engines are commonly located in the engine compartment or engine room of yachts and vessels. These powerful marine engines are known for their reliability and are often installed below deck, providing propulsion and power for various onboard systems. Nanni Diesel offers a comprehensive range of engine parts and spare parts to ensure the continued performance of their engines in the demanding marine environment.
What spare parts catalog is available for Nanni Diesel engines?
Nanni Diesel provides an extensive spare parts catalog tailored to their engines, offering a wide array of genuine components. This comprehensive catalog includes parts for various engine models, such as Nanni Diesel marine engines, Nanni boat engines, Nanni generators, and heat exchangers. It covers critical components like filters, gaskets, pumps, belts, and more, making it a valuable resource for boat owners and technicians to easily identify and obtain the specific parts needed for maintenance, repairs, or replacements.
Nanni Diesel engines are strategically designed to fit within the engine compartment or dedicated engine room of yachts and vessels, optimizing space utilization while ensuring efficient performance. With a diverse lineup ranging from compact 10hp engines to powerful models, Nanni offers a comprehensive range of marine diesel engines tailored to suit varying vessel sizes and applications worldwide. Their commitment to quality extends to a full range of marine engine parts and spare parts, backed by extensive sales and customer support to assist boat owners in maintaining top-tier performance, whether at home or exploring the seas.
What types of maintenance are recommended for Nanni Marine Diesel Engines?
To ensure the optimal performance and longevity of Nanni Diesel engines, regular maintenance practices are crucial. This includes routine checks of engine components, changing filters and fluids at recommended intervals, inspecting and cleaning heat exchangers, and using genuine Nanni spare parts when replacements are needed. Following the manufacturer's guidelines outlined in the Nanni Diesel spare parts catalogue is essential for maintaining the engine's reliability and efficiency in marine applications.