Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Nanni Diesel 970315344 piston ring assembly 0.5 is a precision sealing element used in the crankshaft and piston assembly to help maintain strong compression control and stable oil regulation at the piston. Designed as an OEM-fit replacement for 3.100HE and N3.30 engines, it supports efficient combustion performance and consistent cylinder sealing under marine operating loads. |
$ 452.69
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970315352 eye joint is a connection element used within the injection and feed pump assembly on N4.65 engines. It supports secure line or linkage attachment at the pump, helping maintain dependable fuel delivery and stable pump operation with an OEM-style fit for marine service. |
$ 27.59
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970315353 O-ring sealing element supports leak-free operation within the injection and feed pump assembly on N4.65 engines. Designed as an OEM-fit replacement, it helps maintain proper fuel circuit sealing to protect prime stability and reliable fuel delivery in marine service. |
$ 7.61
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970315389 cylinder head sealing gasket is designed for the cylinder head assembly (page 9) on N4.40 engines and helps maintain a tight seal between the cylinder head and engine block. With a listed thickness of 1.20, it supports stable compression and helps control coolant and combustion-gas sealing for dependable marine engine operation. |
$ 708.88
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970315399 sealing O-ring for the sea water pump cover helps keep the pump housing properly sealed to support stable raw-water flow and reduce the risk of leakage at the cover joint. Supplied as part of the sea water pump assembly, it is intended for N4.85 and N4.100 engines where a dependable cover seal is critical for maintaining cooling-water circulation. |
$ 19.41
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970315431 bearing case cover is a precision-fit closing element for the crankshaft bearings assembly, helping protect the bearing area and maintain correct retention and alignment in the lower-end structure. Designed for use on Nanni Diesel 3.100HE and 4.150HE engines, it supports reliable crankshaft bearing operation in demanding marine duty. |
$ 192.06
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970315453 crankshaft metal element No. 1 is a precision engine component used within the crankshaft and pistons assembly to support smooth rotating operation and stable alignment under load. Designed as a direct-fit replacement for Nanni Diesel 3.100HE and 4.150HE marine engines, it helps maintain dependable bottom-end performance and service reliability. |
$ 230.12
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970315520 fastening bolt is a dedicated hardware element used within the fuel filter assembly to keep the filter components securely clamped during engine operation. Designed for OEM-correct fit on T4.270, T4.230, and T4.205 Standard engines, it supports leak-resistant fuel system service by maintaining proper retention of the fuel filter assembly parts under vibration. |
$ 14.17
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970315604 rubber sealing washer is a combined washer-and-seal element used within the turbocharger and exhaust mixer assembly to help maintain tight, vibration-resistant joints. Designed for Nanni T6 marine diesel applications, it supports secure fastening and helps reduce the risk of leakage around connected components on T6.420TDI and T6.300 engines. |
$ 5.35
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970315607 crankshaft lip seal is a sealing element used in the crankshaft and main bearing assembly to help keep engine oil contained at the rotating shaft interface. Designed for N3.21 Standard engines, it supports clean, reliable operation by maintaining a tight seal where the crankshaft passes through the engine housing. |
$ 99.21
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970315619 140A Type B1 fuse is a protective electrical element for the electrics system, designed to safeguard key circuits against overload and short-circuit conditions. Built for dependable OEM fit on T4.270, T4.230, and T4.205 Standard engines, it helps maintain reliable power distribution and reduces the risk of electrical damage onboard. |
$ 2.96
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970315620 80A Type B1 fuse is a protective electrical element used in the electrics system to safeguard key circuits from overcurrent events. Designed for OEM-fit replacement on Nanni T4 series engines, it helps maintain reliable power distribution and wiring protection on T4.270, T4.230, and T4.205 Standard engines. |
$ 3.60
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970315621 40A Type B1 fuse is a protective electrical element used in the electrics system to help safeguard circuits from overloads. Designed for Nanni T4.270, T4.230, and T4.205 Standard engines, it supports dependable power distribution by interrupting the circuit when excessive current is present. |
$ 2.74
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970315622 20A blade-type fuse is a protective electrical element used in the electrics system to safeguard wiring and components against overcurrent. Designed for reliable OEM-style replacement on Nanni T4 series installations, it supports the electrical protection needs of T4.270, T4.230, and T4.205 Standard engines. |
$ 5.37
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970315713 intercooler body is a core structural component of the air cooler assembly used on N4.85 and N4.100 engines. It forms the main housing that supports the intercooler section, helping route charge air through the cooling circuit for stable intake-air temperatures and dependable engine operation in marine service. |
$ 2,921.25
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970315724 timing gear case gasket provides a secure seal for the timing gear case assembly on N4.65 engines. Designed as an OEM-style replacement, it helps keep the gear case properly sealed to support clean, reliable operation and protect internal timing components from leaks that can compromise performance. |
$ 118.20
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970315796 straight locating pin is a precision fastener used within the crankshaft and pistons assembly to help position and secure related components during operation. Designed for correct OEM fit on N4.65 engines, it supports reliable alignment in the rotating assembly where consistent placement is essential for smooth mechanical performance. |
$ 6.26
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970315806 flywheel fastening bolt is built to secure the flywheel within the flywheel assembly on N4.65 engines. It helps maintain a rigid, vibration-resistant connection between the flywheel and the crankshaft interface, supporting reliable power transmission to the drivetrain in marine operating conditions. |
$ 60.63
-
+
|
Where is the Nanni Diesel engine typically located on a yacht or vessel?
Nanni Diesel engines are commonly located in the engine compartment or engine room of yachts and vessels. These powerful marine engines are known for their reliability and are often installed below deck, providing propulsion and power for various onboard systems. Nanni Diesel offers a comprehensive range of engine parts and spare parts to ensure the continued performance of their engines in the demanding marine environment.
What spare parts catalog is available for Nanni Diesel engines?
Nanni Diesel provides an extensive spare parts catalog tailored to their engines, offering a wide array of genuine components. This comprehensive catalog includes parts for various engine models, such as Nanni Diesel marine engines, Nanni boat engines, Nanni generators, and heat exchangers. It covers critical components like filters, gaskets, pumps, belts, and more, making it a valuable resource for boat owners and technicians to easily identify and obtain the specific parts needed for maintenance, repairs, or replacements.
Nanni Diesel engines are strategically designed to fit within the engine compartment or dedicated engine room of yachts and vessels, optimizing space utilization while ensuring efficient performance. With a diverse lineup ranging from compact 10hp engines to powerful models, Nanni offers a comprehensive range of marine diesel engines tailored to suit varying vessel sizes and applications worldwide. Their commitment to quality extends to a full range of marine engine parts and spare parts, backed by extensive sales and customer support to assist boat owners in maintaining top-tier performance, whether at home or exploring the seas.
What types of maintenance are recommended for Nanni Marine Diesel Engines?
To ensure the optimal performance and longevity of Nanni Diesel engines, regular maintenance practices are crucial. This includes routine checks of engine components, changing filters and fluids at recommended intervals, inspecting and cleaning heat exchangers, and using genuine Nanni spare parts when replacements are needed. Following the manufacturer's guidelines outlined in the Nanni Diesel spare parts catalogue is essential for maintaining the engine's reliability and efficiency in marine applications.