Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Nanni Diesel 970315046 cylinder head assembly is a complete cylinder-head component built for the cylinder head system on N2.14 marine diesel engines. It supports efficient combustion by housing critical top-end passages and sealing surfaces, helping maintain reliable compression and stable engine operation under marine duty cycles. |
$ 3,939.09
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970315047 timing gear case gasket is a sealing element for the timing gear case assembly, helping protect the front gear train area by maintaining a tight joint at the timing case cover. It is used on N2.14 engines and on N3.21 engines (from Serial No. KTC08050772), including N3.21 Standard engines, to support clean, leak-controlled operation around the timing case. |
$ 81.57
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970315049 injection pump spacing shim (0.175 mm) is a precision adjustment element used within the injection and feed pumps assembly on N2.14 engines. It helps set correct pump positioning during service work, supporting accurate fuel system setup and consistent engine operation. |
$ 23.05
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970315050 injection pump shim (0.350 mm) is a precision spacing element used within the injection and feed pumps assembly to help set correct pump positioning and alignment. Designed for N2.14 engines, it supports accurate fuel system setup for consistent injection performance and reliable operation. |
$ 16.88
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970315051 injection pipe is a precision line used within the glow plug assembly to support dependable cold-start operation on N2.14 engines. Built for correct routing and secure connection in the starting-aid system, it helps maintain consistent delivery where it is required for reliable engine starting and smooth warm-up. |
$ 219.22
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970315052 injection pipe is a precision fuel line used within the glow plug assembly on N2.14 marine diesel engines. It supports clean, controlled fuel delivery within the injection system layout, helping maintain consistent starting and running performance with an OEM-correct fit. |
$ 219.75
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970315054 complete cylinder head assembly is a direct replacement component for the cylinder head system on N3.21 marine diesel engines. Supplied as a complete cylinder head, it restores the critical top-end structure that supports valve train operation and combustion sealing, and it is intended for engines from engine number KTC08050772 onward, including N3.21 and N3.21 Standard applications. |
$ 5,167.93
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970315056 crankcase assembly forms the core structural housing within the crankcase and cylinders assembly, supporting correct alignment and protection of key internal engine components. Built as an OEM replacement part for Nanni Diesel N4.40 and N4.50 marine engines, it helps maintain the integrity of the engine’s lower-end architecture for dependable operation underway. |
$ 28,202.01
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970315057 timing gear case assembly supports secure, accurate operation of the engine timing case by housing and protecting the timing gear train. Designed for Nanni Diesel N4.40 and N4.50 marine engines, it helps maintain alignment and shielding of critical timing components for dependable engine performance. |
$ 3,336.58
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970315058 flange bolt is a dedicated fastening element used in the timing case and timing gear case, helping secure covers and mating components so the timing drive area stays accurately aligned and protected. Built for OEM-style fit on Nanni N4 series engines, it is specified for N4.40, N4.50, and N4.65 applications to support dependable service work and clean, vibration-resistant assembly. |
$ 7.79
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970315059 flange bolt is a dedicated engine fastener that secures components within the timing case area for dependable gear-train alignment and vibration resistance. Used in the timing case or timing gear case assembly, it is a direct-fit replacement for N4.40, N4.50, and N4.65 engines to support clean, secure reassembly during service work. |
$ 13.91
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970315060 flange bolt is a dedicated timing case fastener that provides secure, vibration-resistant clamping for critical front-engine components on Nanni marine diesel engines. Used within the timing case and timing gear case assemblies, it helps maintain correct alignment and sealing of the timing cover area on N4.40, N4.50, and N4.65 engines. |
$ 16.45
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970315063 complete cylinder head assembly is a direct-fit replacement component for the cylinder head system on N4.50 marine diesel engines. Designed to restore proper valve and combustion chamber function, it supports reliable compression sealing and stable engine operation under continuous marine loads. |
$ 8,207.46
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970315064 cylinder head sealing gasket is built to maintain a tight seal between the cylinder head and engine block in the cylinder head assembly. Used on Nanni Diesel N4.50 and N4.65 engines, it helps preserve compression and supports stable coolant and combustion-gas separation for dependable marine engine operation. |
$ 584.46
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970315065 cylinder head gasket is a precision sealing element for the cylinder head assembly, helping maintain stable compression and separation of combustion gases and engine coolant. Designed for OEM-fit service on N4.50 and N4.65 marine diesel engines, it supports dependable operation during heavy-load running and repeated thermal cycles. |
$ 554.92
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970315066 cylinder head sealing gasket is a precision-fit component for the cylinder head assembly, helping maintain combustion compression and proper sealing between the cylinder head and engine block. Designed for Nanni N4.50 and N4.65 marine diesel engines, it supports dependable operation by protecting the sealing interface exposed to heat, pressure, and coolant flow. |
$ 586.77
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970315067 cylinder head sealing gasket supports a tight, stable joint between the cylinder head and engine block for dependable combustion and fluid sealing. Positioned within the cylinder head assembly, it is the correct OEM replacement for N4.50 and N4.65 engines, helping maintain compression and protect the cooling circuit under marine operating loads. |
$ 614.11
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970315068 cylinder head sealing gasket supports a tight, stable joint between the engine block and cylinder head within the cylinder head assembly. Specified as a 1.35 gasket for N4.50 and N4.65 engines, it helps maintain combustion sealing and protects coolant and oil passages for dependable marine engine operation. |
$ 551.77
-
+
|
Where is the Nanni Diesel engine typically located on a yacht or vessel?
Nanni Diesel engines are commonly located in the engine compartment or engine room of yachts and vessels. These powerful marine engines are known for their reliability and are often installed below deck, providing propulsion and power for various onboard systems. Nanni Diesel offers a comprehensive range of engine parts and spare parts to ensure the continued performance of their engines in the demanding marine environment.
What spare parts catalog is available for Nanni Diesel engines?
Nanni Diesel provides an extensive spare parts catalog tailored to their engines, offering a wide array of genuine components. This comprehensive catalog includes parts for various engine models, such as Nanni Diesel marine engines, Nanni boat engines, Nanni generators, and heat exchangers. It covers critical components like filters, gaskets, pumps, belts, and more, making it a valuable resource for boat owners and technicians to easily identify and obtain the specific parts needed for maintenance, repairs, or replacements.
Nanni Diesel engines are strategically designed to fit within the engine compartment or dedicated engine room of yachts and vessels, optimizing space utilization while ensuring efficient performance. With a diverse lineup ranging from compact 10hp engines to powerful models, Nanni offers a comprehensive range of marine diesel engines tailored to suit varying vessel sizes and applications worldwide. Their commitment to quality extends to a full range of marine engine parts and spare parts, backed by extensive sales and customer support to assist boat owners in maintaining top-tier performance, whether at home or exploring the seas.
What types of maintenance are recommended for Nanni Marine Diesel Engines?
To ensure the optimal performance and longevity of Nanni Diesel engines, regular maintenance practices are crucial. This includes routine checks of engine components, changing filters and fluids at recommended intervals, inspecting and cleaning heat exchangers, and using genuine Nanni spare parts when replacements are needed. Following the manufacturer's guidelines outlined in the Nanni Diesel spare parts catalogue is essential for maintaining the engine's reliability and efficiency in marine applications.