Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Nanni Diesel 970314202 adjusting washer is a precision adjustment element used within the nozzle holder assembly on N4.38 engines. Installed as part of the injector hardware stack-up, it supports correct component positioning to help maintain stable fuel injection operation and dependable engine performance. |
$ 15.88
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970314203 adjusting washer is a precision shim element used within the injector nozzle holder assembly on N4.38 engines. Installed to help set and maintain correct injector/nozzle holder adjustment, it supports consistent fuel injection performance and dependable combustion in marine operating conditions. |
$ 20.08
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970314204 adjusting washer is a precision spacer element used within the injector nozzle holder assembly on N4.38 engines. Installed during injector servicing, it supports correct component positioning in the nozzle holder, helping maintain stable fuel injection operation and dependable engine performance. |
$ 19.85
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970314205 adjusting washer is a precision shim element used within the nozzle holder assembly to support correct injector/nozzle stack positioning on N4.38 engines. Designed as an OEM-fit replacement, it helps maintain stable seating and consistent operation of the fuel injection components in demanding marine duty. |
$ 16.68
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970314206 adjusting washer is a precision shim element used within the nozzle holder assembly on N4.38 engines. Installed to set correct positioning and clamping of injector nozzle holder components, it helps maintain consistent fuel injection alignment for reliable combustion and smooth marine engine operation. |
$ 16.55
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970314207 adjusting washer is a precision shim element used within the nozzle holder assembly to help set correct injector/nozzle positioning and secure stack-up on N4.38 marine diesel engines. Installed as part of the fuel injection hardware, it supports stable spray geometry and consistent engine running by maintaining accurate internal clearances. |
$ 20.13
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970314208 adjusting washer is a precision shim element used within the nozzle holder assembly to help set the correct injector/nozzle seating and alignment on N4.38 engines. Installed as part of the nozzle holder stack-up, it supports consistent fuel injection performance by maintaining proper component positioning under operating loads. |
$ 16.63
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970314209 fuel camshaft is a precision valve-train component used within the fuel camshaft assembly to drive and time fuel-system actuation on N4.38 engines. Built for OEM fit, it supports stable injection timing and consistent engine performance under marine operating loads. |
$ 1,346.89
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970314211 injection pump shim is a precision spacing element used within the injection pump component assembly on N4.38 engines. It supports correct pump positioning and alignment during service work, helping maintain accurate fuel system setup for reliable starting, smooth running, and consistent marine diesel performance. |
$ 31.75
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970314212 start spring pin is a precision locating and retaining fastener used within the crankcase and cylinders assembly on N4.38 engines. It supports secure positioning of the start spring so the related mechanism operates smoothly and consistently during engine use. |
$ 20.22
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970314220 governor adjustment fastener provides precise mechanical setting control within the governor setting assembly on Nanni marine diesel engines. Used on N3.30 and N4.38 engines, this adjusting bolt supports stable speed regulation by allowing accurate governor calibration during service or overhaul. |
$ 10.37
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970314221 timing gear case assembly is a complete gear case component used within the timing case system, helping protect and support the engine’s timing gear arrangement for stable, aligned operation. Specified for engines up to Serial No. KT08090422, it is a direct-fit replacement for N3.30 and N4.38 marine diesel engines where the correct timing case configuration is required. |
$ 2,710
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970314224 governor start spring is a precision control spring used within the governor assembly on N3.30 engines to support stable starting behavior and correct fuel-control response. Designed as an OEM-fit replacement, it helps maintain smooth governor operation for dependable engine pick-up from start through low-speed running. |
$ 12.10
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970314225 hydraulic pump cover is a protective engine component used within the governor setting assembly on N3.30 engines. It helps shield and support the hydraulic pump area, promoting stable governor-related operation by keeping the pump section properly enclosed and protected in marine service. |
$ 51.74
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970314226 governor shaft assembly is a precision drivetrain element used within the camshaft fuel system on N3.30 engines. It supports stable governor operation by transmitting motion in the fuel control mechanism, helping the engine maintain consistent speed response under changing load conditions. |
$ 2,325.25
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970314228 governor shaft is a precision drive element used within the camshaft fuel assembly on N4.38 marine diesel engines. It supports stable governor actuation to help maintain consistent engine speed under changing loads, making it an ideal OEM replacement for dependable fuel control operation. |
$ 252.79
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970314231 governor shaft assembly is a precision drivetrain component used within the camshaft fuel assembly to support accurate governor movement and stable engine speed control. Designed for N4.38 engines, it helps transmit and guide governor action so the fuel system responds smoothly under changing loads in marine operating conditions. |
$ 2,471.08
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970314232 governor drive gear supports stable engine speed control by transmitting timing motion within the camshaft fuel assembly on Nanni marine diesel engines. Designed as an OEM replacement component, it helps the governor system react smoothly to load changes for consistent running on N3.30 and N4.38 engines. |
$ 389.39
-
+
|
Where is the Nanni Diesel engine typically located on a yacht or vessel?
Nanni Diesel engines are commonly located in the engine compartment or engine room of yachts and vessels. These powerful marine engines are known for their reliability and are often installed below deck, providing propulsion and power for various onboard systems. Nanni Diesel offers a comprehensive range of engine parts and spare parts to ensure the continued performance of their engines in the demanding marine environment.
What spare parts catalog is available for Nanni Diesel engines?
Nanni Diesel provides an extensive spare parts catalog tailored to their engines, offering a wide array of genuine components. This comprehensive catalog includes parts for various engine models, such as Nanni Diesel marine engines, Nanni boat engines, Nanni generators, and heat exchangers. It covers critical components like filters, gaskets, pumps, belts, and more, making it a valuable resource for boat owners and technicians to easily identify and obtain the specific parts needed for maintenance, repairs, or replacements.
Nanni Diesel engines are strategically designed to fit within the engine compartment or dedicated engine room of yachts and vessels, optimizing space utilization while ensuring efficient performance. With a diverse lineup ranging from compact 10hp engines to powerful models, Nanni offers a comprehensive range of marine diesel engines tailored to suit varying vessel sizes and applications worldwide. Their commitment to quality extends to a full range of marine engine parts and spare parts, backed by extensive sales and customer support to assist boat owners in maintaining top-tier performance, whether at home or exploring the seas.
What types of maintenance are recommended for Nanni Marine Diesel Engines?
To ensure the optimal performance and longevity of Nanni Diesel engines, regular maintenance practices are crucial. This includes routine checks of engine components, changing filters and fluids at recommended intervals, inspecting and cleaning heat exchangers, and using genuine Nanni spare parts when replacements are needed. Following the manufacturer's guidelines outlined in the Nanni Diesel spare parts catalogue is essential for maintaining the engine's reliability and efficiency in marine applications.