Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Nanni Diesel 970314157 governor fork lever is a control linkage element used within the speed regulator and governor assembly to transmit movement accurately and keep engine speed response stable. Designed for OEM-fit replacement, it supports smooth governing operation on N2.14 engines and on N3.21 and N3.21 Standard engines. |
$ 462.79
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970314165 gasket set is a multi-gasket sealing kit intended for engine service work, helping restore tight, leak-resistant joints across key mating surfaces. Designed for use on Nanni Diesel engines, it supports clean reassembly and dependable sealing performance during maintenance and repair. |
$ 223.08
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970314175 crankcase fastener bolt secures critical joints within the crankcase and cylinder area, helping maintain proper clamping force and alignment under marine diesel vibration and load. Used in the crankcase and cylinders assembly, it is a direct-fit replacement for Nanni Diesel N4.40 and N4.50 engines to support dependable engine integrity during service and overhaul work. |
$ 2.96
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970314176 pan head screw is a dedicated fastening element for securing the cylinder head cover on N3.30 engines. Used within the cylinder head cover assembly, it helps maintain stable clamping and alignment of the cover, supporting clean sealing and dependable operation in marine engine service. |
$ 0.86
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970314180 O-ring is a sealing element for the speed control assembly, helping keep control-related interfaces tight and protected against leakage and ingress in marine engine installations. Designed as a direct-fit replacement, it supports smooth, dependable operation on Nanni Diesel N4.40 and N4.50 engines. |
$ 6.26
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970314181 sealing O-ring is a precision-fit seal used within the timing case and oil pan assemblies to help maintain leak-free engine operation. Designed for dependable OEM replacement fit on N4 series marine engines, it supports proper oil containment and clean sealing during timing case service on N4.40 and N4.50 engines, and in the oil pan area on N4.85 and N4.100 engines. |
$ 4.16
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970314182 cylinder head plug is a dedicated sealing element used in the cylinder head assembly to close off a machined port and help maintain proper coolant and pressure containment. Built for a correct OEM fit, it suits Nanni Diesel N3.30 and N4.38 marine engines, supporting dependable operation and clean service work when renewing cylinder head components. |
$ 7.22
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970314186 crankcase plug is a dedicated sealing element used in the crankcase and cylinder area to close off a service or machining opening and help maintain proper oil containment. Designed as an OEM-fit replacement, it supports clean, leak-resistant operation on Nanni N4.40 and N4.50 marine diesel engines. |
$ 24.29
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970314188 starter-motor ball bearing is a precision rolling element designed to support smooth, stable rotation inside the starter motor assembly. Used on N3.21, N3.21 Standard, N3.30, and N4.38 engines, it helps the starter operate efficiently by reducing friction and maintaining proper alignment under repeated start cycles in marine service. |
$ 97.73
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970314189 camshaft drive gear is a timing component used in the camshaft assembly to transmit rotational drive and maintain correct valve timing. Specified for N4.50 engines with serial number up to No. KTH08040182, it is a precise OEM replacement choice when servicing camshaft and timing geartrain components. |
$ 548.75
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970314191 governor adjustment bolt assembly is a precision adjustment fastener used in the governor setting system to help set and retain the correct governing position on N4.50 engines. Designed as an OEM-fit replacement, it supports stable engine speed control and dependable operation under marine load conditions. |
$ 51.87
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970314193 magnetic switch assembly is a starter-motor control component that helps deliver dependable starter engagement when you turn the key. Used within the starter motor assembly, it supports consistent cranking performance on Nanni N4.40 and N4.50 marine diesel engines, making it a smart OEM replacement choice during starter service or refurbishment. |
$ 1,946.24
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970314195 rocker arm shaft is a valvetrain component used within the Valves and Springs assembly on N3.21 marine diesel engines. It supports and aligns the rocker arms so valve motion remains stable and accurately transferred from the pushrod train to the valves, helping maintain consistent engine operation on N3.21 and N3.21 Standard engines. |
$ 358.55
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970314197 fuel injection pump camshaft is a precision drive element used within the injection and feed pump assembly to control the pump’s mechanical actuation and support consistent fuel delivery timing. Built for OEM-fit replacement, it suits Nanni 3.75HE engines as well as N3.21 and N3.21 Standard engines, making it a dependable choice when servicing the fuel injection drive train. |
$ 1,279.95
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970314198 camshaft bush is a precision support element within the camshaft assembly, helping the camshaft run smoothly and maintain correct alignment under load. Designed as an OEM-fit replacement for 3.75HE, N3.21, and N3.21 Standard engines, it promotes stable valve timing operation and dependable long-term performance in marine diesel duty. |
$ 62.06
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970314199 adjusting washer is a precision shim-style element used within the injector nozzle holder assembly to support correct injector setup on N4.38 engines. Installed in the nozzle holder stack, it helps maintain consistent injector seating and alignment for reliable fuel delivery and stable combustion in marine duty. |
$ 16.55
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970314200 adjusting washer is a precision shim element used within the nozzle holder assembly to help set correct injector/nozzle positioning for stable fuel delivery. Designed for N4.38 engines, it supports consistent injection performance by maintaining accurate internal spacing during service and rebuild work. |
$ 17.21
-
+
|
|
1-2 weeks delivery time The Nanni Diesel 970314201 adjusting washer is a precision shim element used within the injector nozzle holder assembly to help set correct injector stack height and seating. Designed for N4.38 engines, it supports consistent injector installation, secure component alignment, and stable fuel injection performance under marine operating conditions. |
$ 16.21
-
+
|
Where is the Nanni Diesel engine typically located on a yacht or vessel?
Nanni Diesel engines are commonly located in the engine compartment or engine room of yachts and vessels. These powerful marine engines are known for their reliability and are often installed below deck, providing propulsion and power for various onboard systems. Nanni Diesel offers a comprehensive range of engine parts and spare parts to ensure the continued performance of their engines in the demanding marine environment.
What spare parts catalog is available for Nanni Diesel engines?
Nanni Diesel provides an extensive spare parts catalog tailored to their engines, offering a wide array of genuine components. This comprehensive catalog includes parts for various engine models, such as Nanni Diesel marine engines, Nanni boat engines, Nanni generators, and heat exchangers. It covers critical components like filters, gaskets, pumps, belts, and more, making it a valuable resource for boat owners and technicians to easily identify and obtain the specific parts needed for maintenance, repairs, or replacements.
Nanni Diesel engines are strategically designed to fit within the engine compartment or dedicated engine room of yachts and vessels, optimizing space utilization while ensuring efficient performance. With a diverse lineup ranging from compact 10hp engines to powerful models, Nanni offers a comprehensive range of marine diesel engines tailored to suit varying vessel sizes and applications worldwide. Their commitment to quality extends to a full range of marine engine parts and spare parts, backed by extensive sales and customer support to assist boat owners in maintaining top-tier performance, whether at home or exploring the seas.
What types of maintenance are recommended for Nanni Marine Diesel Engines?
To ensure the optimal performance and longevity of Nanni Diesel engines, regular maintenance practices are crucial. This includes routine checks of engine components, changing filters and fluids at recommended intervals, inspecting and cleaning heat exchangers, and using genuine Nanni spare parts when replacements are needed. Following the manufacturer's guidelines outlined in the Nanni Diesel spare parts catalogue is essential for maintaining the engine's reliability and efficiency in marine applications.