At Yacht Supply 24, we supply a range of marine products, including Kobelt steering & Kobelt control systems, engine controls, clutches and brakes, as well as alarm and monitoring systems for marine vessels. Whether you're in need of reliable marine components for recreational or commercial applications, Kobelt's precision-engineered products are trusted by professionals around the world.
Kobelt has its origins in a garage in Vancouver, where Jack Kobelt began designing, manufacturing and assembling products and components in 1962. 50 years later, Kobelt has a vertically integrated factory a few blocks away that is capable of casting parts in an automated foundry, processing parts on an array of CNC machinery and assembling sophisticated products and systems of all shapes and sizes. Starting in the 2000s, Kobelt focused on expanding the electronic control system line by creating the Mighty Mariner; a propulsion control system that includes microprocessors, actuators & indicators that allowed for ease of installation & configuration. New, more sophisticated electronic control heads were produced that included LED panels with enhanced displays and functionality. Using the company’s pedigree of durable, dependable products as the foundation for success, Kobelt now stands ready to build the next generation of products.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time Price incl. 19% VAT Kobelt 7201 Auto Pilot Hydraulic pump that comes with a special board. The relay on the board is capable of handling 30 amperes of current for any rotation. A fuse is provided for maximum engine load at 30. This is designed for 12 volts of engine. For 24 volts of the engine, the maximum load is 15 amps, and the fuse is installed accordingly. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time Price incl. 19% VAT This series of disc brakes was specially designed to go along with the 5020 brake calipers, again, so that the entire system works smoothly and reliably. Due to the self-cooling system of these disks, they can be placed in the category of ultra-strong and very wear-resistant. The versatility of these disks is practically unlimited. These discs are cast with their high strength cast iron and are also available from other different materials, as desired by the customer. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time Price incl. 19% VAT These discs are designed to match caliper 5021 through 5024 as well as model 5027. This series of vented type disks, thanks to their rib in a design that allows them to cool. Therefore, they are in a series of heavy-duty and wear-resistant. We recommend that you contact our specialists in order to choose the true correct disk option. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time Price incl. 19% VAT These discs are designed to match the 5019 brake calipers (liquid or spring). These disks are designed for medium operating conditions, due to their internal ventilated design, they are extremely wear-resistant. They are made of cast iron. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time Price incl. 19% VAT These brake discs are designed for medium to high operating levels. The patented design involves rapid cooling of the disks due to air fuses. This drive will perform tasks that are not possible with conventional ventilated drives. These discs are available in two different sizes. Great friction gives you more contact area with the brake pad. They have a powerful braking force. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time Price incl. 19% VAT This caliper is designed specifically for medium and light operating conditions, and is used in almost all industries. Due to its compact and durable design, it can be installed in very small spaces, and will do its job for many years. The caliper is equipped with balancing, for uniform wear. The structure is made of bronze and stainless steel. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time Price incl. 19% VAT The fluid pressure in this system is absolutely proportional to the braking force. An increase in pressure will increase the braking torque. All 5019 brake calipers can be used in any of hydraulic or pneumatic applications, as its "O" ring and piston design will not be damaged by hydraulic fluid. A spring drive is available with a large number of combinations, including adjustable springs, for various braking moments. The standard brake pads supplied by Kobelt are made of asbestos, and have been designed to provide a coefficient of friction of approximately 0.45 to 0.55. The lining can withstand up to 7500 ° F (400 ° C). Brake shoe bearings - removable from the brake shoe itself. This arrangement allows adjustment washers to be installed between the bearing and brake pads. Installation of adjustment gaskets between these two elements will reduce the gap between the brake pads. 5019 has a leg mount or side mount. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time Price incl. 19% VAT The 5020 is a larger model of the 5019. However, it has a much higher downforce, and therefore fits into the environment of difficult conditions. Replaceable gaskets can be installed between brake pads to adapt to different disc thicknesses. Membrane-type fluid is used. Maximum pressure 100 psi (6.9 bar). The braking force is directly proportional to the fluid pressure in the actuator. Two pipe connections are provided on the drive. These pipe ports are common within the structure, and therefore, in most cases, only one inlet for connection is quite enough. All are made of bronze and stainless steel, which will ensure years of uninterrupted service. Kobelt developed an entire series of brake discs to go with this in the kit, due to its popularity. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time Price incl. 19% VAT A special series of brake discs (12-30 "diameter), with super ventilation and a lot of energy capabilities, was designed to go with a 5020 brake caliper, providing almost unlimited applications in all industries for stop and brake. The force is absolutely proportional to the force of the actuator. Therefore, by changing the control pressure on the actuator, a smooth and positive response of the system is ensured. All Kobelt brakes are equipped with patented balancing links that provide equal wear on the brake pads. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time Price incl. 19% VAT The 5021 brake caliper is very flexible due to its large area and reinforced clamp. This is the main reason why it is used in almost all industries where frequent braking and stopping are required. Patented balancing rods provide uniform wear on both brake pads. Washers can be installed between brake pads to reduce the gap between them. The maximum disk thickness is 2. The drive is equipped with two holes for supplying liquid. These ports are interconnected internally and require only one input. The maximum liquid supply is 100 psi (6.9 bar). |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time Price incl. 19% VAT As the fluid pressure decreases, the actuator spring begins to press on the brakes. The manual screw option is available to adjust fluid pressure. To achieve different pressure forces, various springs are available. The drives are made of bronze and stainless steel hardware, together with carbon steel. Steel springs made of stainless steel are available by special order. The drive fluid pressure shall not exceed 250 psi. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time Price incl. 19% VAT This caliper is a derivative of the 5021, where in fact the two brakes are combined into one. This doubles the clamping forces and also increases the clamping area. 5022 is a very compact caliper and is ideal for installation in a limited space. Most parts for 5022 are interchangeable with the 5021 model. The drives are equipped with two ports each. Only one port is required to connect to the management source in most applications. The maximum feed pressure to the caliper is 100 psi (6.9 bar). The bearings are detached from the brake shoe and alignment plates may be installed between the two members to reduce the clearance between the brake pads. The pusher on the air actuator also has an adjustment which can be used for the least wear of the brake pads. This will avoid excessive use of compressed air when the brake pedal is pressed. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time Price incl. 19% VAT The spring caliper is used in cases where the pressure of the working fluid releases the brakes, and the spring starts to operate, replacing the liquid pressure. These brakes are extremely durable. It is simply not possible to maintain fluid pressure for a long period. However, the spring tension can be maintained almost indefinitely. The drives are very pressure sensitive and the brakes can be controlled smoothly. The slightest change in fluid pressure will cause a proportional change in braking force. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time Price incl. 19% VAT This brake caliper was designed specifically for use in high torque systems. It is ideal for emergency stops and propeller shaft stops. It will work well with the standard disc series. This brake caliper is available with both air pneumatic pressure and spring version. Drives are equipped with two holes for liquid supply. These ports are shared and have only one input. Changing the control pressure on the drive will cause an absolutely proportional change in braking torque. The maximum liquid supply is 100 PSI (6.9 bar). Kobelt has developed an entire series of brake discs to match this caliper. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time Price incl. 19% VAT A reinforced version of the model 5023, and is used for systems with the highest friction and very high torque. It is ideal for emergency stops and propeller shaft stops. It will work well with the standard disc series. This brake caliper is available with both air pneumatic pressure and spring version. Drives are equipped with two holes for liquid supply. These ports are shared and have only one input. Changing the control pressure on the drive will cause an absolutely proportional change in braking torque. The maximum liquid supply is 100 PSI (6.9 bar). Kobelt has developed an entire series of brake discs to match this caliper. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time Price incl. 19% VAT The 5024 is a very compact mechanism for high brake torque. All components on this caliper are shared with Model 5027. This caliper is suitable for many industrial and marine applications. The latest developments in Kobelt's production are included in this support, and are subject to a long warranty period. The diaphragm drive is very sensitive to pressure changes. Maximum drive feed pressure shall not exceed 100 psi (6.9 bar). The plug actuator can be adjusted to prevent wear. Thus, the gap between the disc and the brake shoe can be maintained at an optimal level. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time Price incl. 19% VAT The 5024 is a compact caliper designed for high brake torque. All components on this caliper are shared with Model 5027. This caliper is ideal for many industrial and marine applications. The latest developments in Kobelt's production are included in this caliper, so they give a long warranty period. The diaphragm actuator responds to changes in fluid pressure very accurately. Maximum drive feed pressure shall not exceed 100 psi (6.9 bar). |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time Price incl. 19% VAT 5025 The brake caliper is designed to absorb high energy with average torque requirements. It corresponds to a series of 4 x 7 discs. This disc offers excellent thermal capabilities and is ideal for marine and industrial applications requiring high energy consumption over long periods of time, such as tension brakes for winches, small hoods, equipment anchors, etc. Due to its large braking application, the caliper offers many hours of operation before a lining change is required. The diaphragm actuator is sensitive to changes in fluid pressure. Maximum drive feed pressure shall not exceed 100 psi (6.9 bar). The fork actuator can be adjusted for the least wear. |
Our managers will contact you and clarify the terms of the order
|
What types of Kobelt Items do you have in your catalogue?