Yacht-supply24.com supplies a wide range of Jabsco products, including water pump systems, engine cooling pumps, searchlights, blowers, marine wc waste systems, toilets, impellers, and more. Whether you need reliable and efficient pumps for hygienic applications, fluid transfer in chemical processing, laboratory, paint processing, plating, and construction, or top-quality marine equipment, Jabsco has got you covered.
Jabsco, a brand under Xylem, is a renowned manufacturer of products for the leisure marine market, with a rich history of over 80 years in servicing general industrial, marine, and sanitary markets. Shop our selection of Jabsco products and enjoy prompt delivery and competitive prices.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Jabsco 15500-0000 float switch module provides precise liquid level control for marine, industrial, and other fluid-handling systems. Its durable construction supports long-lasting use, while the design emphasizes dependable performance and straightforward installation and maintenance for reliable level management in boats, machinery, and general fluid systems. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Jabsco 15780-0100 engine cooling pump is a bronze, bare-shaft marine diesel seawater cooling unit for Cummins K38, K50, KTA38, and KTA50 engines. Its two-impeller design combines a self-priming flexible impeller with a bronze centrifugal impeller to deliver high flow up to 400 GPM while maintaining strong priming performance at low or high speeds. Built from marine-quality bronze and stainless steel with flanged ports, it is engineered for durability, easy service, and reliable operation when suction lines are airtight, with an important limitation of not running dry for more than 30 seconds. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Jabsco 16400-3350 drum pump tube is a 35-1/2 in (90 cm) long polypropylene transfer tube built to move liquids from containers, carboys, drums, and vats. Its 1 in (25 mm) diameter and slip-on hose discharge ports support straightforward hose connection, while the polypropylene construction makes it well-suited for corrosive liquids. The motor is sold separately, and the updated manufacturer catalog reference is Lutz Pumps 0110-205. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Jabsco 16400-3400 drum pump tube is a 40 in (102 cm) long polypropylene tube built to empty containers, carboys, drums, and vats while handling corrosive liquids. It uses 1 in (25 mm) diameter slip-on hose discharge ports, and the motor is sold separately. The manufacturer has updated the catalog reference, and it now ships under Lutz Pumps catalog number 0110-205. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Jabsco 16450-0115 drum pump electric motor delivers efficient liquid transfer and dispensing with a stated flow rate of 26 GPM (100 LPM). It operates on 115 VAC, 60 Hz, single-phase power and includes a self-aligning drive coupling, a built-in power switch safety guard, and an integral circuit breaker with manual reset for dependable operation. Designed for use with Jabsco D100 size drum pump tubes, it features a 20-foot oil-resistant power cord and is intended for various liquid chemicals, but it is not suitable for flammable liquids or explosive environments. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Jabsco 1673-2001 bronze pedestal pump unit is a flexible impeller water-handling solution for marine and industrial service, supplied as a bare shafted pedestal pump end only without a motor. Its bronze construction with a stainless steel shaft, neoprene impeller, and mechanical seal supports reliable operation in demanding environments, while 1/2 inch NPT ports simplify installation. Self-priming performance lifts up to 10 feet with dry suction and up to 25 feet when wetted, with a nominal flow of 40 litres per minute at 1500 rpm, and the pump can be mounted at any angle and run in either direction. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Jabsco 17020-0001 epoxy pump unit delivers durable transfer and circulation performance for industrial and laboratory use, using a glass-filled epoxy pump body to reduce corrosion and metallic contamination. It features a 3/8" NPT internal port size, 5.5 GPM flow at 10 feet of head (1750 RPM), and 21.6 PSI maximum pressure, with impeller options in neoprene, nitrile, or Viton. A corrosion-resistant steel shaft with an epoxy drive sleeve and a mechanical carbon-on-ceramic shaft seal support reliable service, while the 115Vac single-phase motor (1/4 HP) includes overload protection and capacitor start. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Jabsco 17246-0000 macerator motor is a 12-volt drive unit built specifically for the 18590 pump, delivering reliable and efficient operation for marine waste management systems. Engineered for durability, it supports smooth, consistent performance and is well-suited for system upgrades or maintenance to keep the pump running at its best. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Jabsco 17366-1000 pump shaft is a 316 stainless steel replacement shaft for Jabsco 17360-1001 raw water engine cooling pumps, providing a durable fit for marine cooling service. It is suitable for Caterpillar D-343 and Detroit Diesel V-71 and V-92 engines, and cross-references to Caterpillar 3N5692 and Detroit Diesel 8927572. This shaft also fits multiple Jabsco pump models including 17360-1001, 18760-0001 through 18760-0013, and 18760-3000. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Jabsco 17867-0000 oil change hose kit supports efficient, mess-free oil changes for marine engines and other machinery. Its durable, high-quality construction is built for long-term reliability, and the user-friendly design helps simplify routine maintenance. Supplied as a complete hose kit, it includes the essential components needed for a seamless oil-changing experience across a range of applications. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Jabsco 17906-0000 bearing housing kit is a reliable spare-part component designed to support smooth, efficient operation and help maintain machinery performance and longevity, backed by Jabsco precision engineering for durable service. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Jabsco 18220-1123 ballast pump and motor unit delivers reversible water ballasting for boats using a flexible impeller design with a nitrile (Buna) impeller and lip type seal. Its 12 VDC motor, self-priming non-airlocking operation, and integrated run-dry protection help support fast, reliable fill and drain control, including filling a typical 40-gallon ballast tank in under 5 minutes. With 1/2 inch NPT and 1 inch external hose barb ports, a stated flow rate of 9 GPM (34 LPM), and compliance with USCG 183.410 and ISO 8846 marine standards, it is built for durable intermittent-duty ballast tank service and includes a double throw reversing switch for convenient operation. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Jabsco 18328-0012 motor kit with crank arm delivers reliable power for marine applications with a 12 Vdc supply. Built to support efficient performance and durability, it helps ensure smooth operation and provides a dependable, long-lasting upgrade for marine equipment. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Jabsco 18510-0000 Centri Puppy centrifugal pump is a non-self-priming DC motor pump for general marine pumping duties where a flooded intake is present. It uses a 3/4 in. NPT internal port and delivers flow up to 20 GPM, making it suitable for livewell filling and circulation and for diesel fuel transfer (not gasoline). This model has been superseded by Jabsco 50830-0012 with the same performance and dimensions and a complete stainless steel construction; orders placed for 18510-0000 are supplied as 50830-0012. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Jabsco 18510-0001 Centri Puppy centrifugal pump unit is built for general pumping duties where a flooded intake condition exists, including livewell filling, circulation, and diesel fuel transfer (not gasoline). It runs on 24V DC at 4 amps with a 5A fuse, and uses a bronze body and impeller with a Viton lip seal and stainless steel shaft for durable service. A 3/4" NPT internal port supports straightforward plumbing, while the fully enclosed, ignition-protected permanent magnet motor helps deliver reliable operation; this pump is not self-priming. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Jabsco 18590-0001 self-priming waste pump unit is built for reliable and efficient waste pumping in marine and RV environments. Its self-priming capability supports consistent performance in tough conditions, and this model has been replaced by Jabsco 18590-2094, which continues the same high-quality standards. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Jabsco 18590-1001 macerator pump unit with a 24 V motor delivers robust waste management performance, providing 46 liters per minute at 0 meters head and 28 liters per minute at 6 meters head. It uses an oil-resistant nitrile impeller, a stainless wearplate, and a stainless steel cutter that reduces particle size to a maximum of 3 mm, while self-priming up to 1.2 meters and supporting short-term dry running for added reliability. With a 38 mm inlet and 25 mm outlet, 8 A current draw, a required 15 A fuse, and compact dimensions of 9.2 cm (H) × 11.9 cm (W) × 29.4 cm (L), it fits demanding installations where consistent maceration and transfer are essential. |
Our managers will contact you and clarify the terms of the order
|
|
1-2 weeks delivery time The Jabsco 18590-1090 macerator pump is a robust marine sanitation pump designed to handle waste disposal reliably. It runs on 12 Volt power and is equipped with a CE Listed EMC motor for compliance-focused operation. A standard 1-1/2 inch inlet supports straightforward installation, and this model is noted as replaced by Jabsco 18590-2092. |
Our managers will contact you and clarify the terms of the order
|
What is the function of a Jabsco marine toilet, and how does it differ from other types of marine toilets?
A Jabsco marine toilet is designed to handle marine sanitation efficiently by flushing waste into a holding tank or overboard, depending on regulations. It differs from other types of marine toilets by offering both manual and electric models, including the quiet flush variant, which reduces noise for a more comfortable onboard experience. As a leading manufacturer, Jabsco provides reliable marine waste system components that integrate seamlessly with other marine products, such as bilge pumps and water systems, ensuring smooth operation and sanitation on any vessel.
A key advantage of using Jabsco marine toilets is their ability to integrate seamlessly with other Jabsco products, such as searchlights and marine waste systems, providing a comprehensive solution for onboard needs. With expertise in marine water systems, Jabsco ensures that both manual and electric toilet models, including the Jabsco manual toilet, function efficiently even under challenging conditions. Established as an expert in the field, Jabsco continues to innovate and provide high-quality sanitation solutions that meet the demands of marine environments.
How does the Jabsco engine cooling pump help maintain engine temperature and performance in marine environments?
The Jabsco engine cooling pump plays a crucial role in maintaining engine temperature and performance in marine environments by circulating water through the engine to dissipate heat. This pump ensures that the engine runs smoothly by preventing overheating, which can lead to mechanical failure. As a part of Jabsco marine products, these pumps are designed for durability and efficiency, providing reliable performance with easy access to spares and accessories for maintenance.
In what types of boats are Jabsco bilge pumps most commonly used, and why?
Jabsco bilge pumps are most commonly used in a variety of boats, including fishing boats, sailboats, and cruisers, due to their reliability and efficiency in removing excess water. These marine pumps, often combined with rule pumps and equipped with reliable valves, ensure effective water discharge and prevent flooding, maintaining optimal safety and performance. Their widespread use is supported by the brand's reputation for quality and the availability of replacement parts.