Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Jabsco 21770 bronze impeller pump is a self-priming, flange-mounted engine cooling unit (size 040) built for durable, efficient service. It delivers a nominal flow rate of 40 litres/min (8.9 gallons/min) at 1500 rpm, uses a Neoprene impeller with a key-drive hub, and is driven via coupling. Hose-port information is provided for 1 inch ID hose connections, and the pump is often found on DTN (Holland) Renault marinized engines. |
$ 829.98
-
+
|
|
1-2 weeks delivery time The Jabsco 21777 shaft component is engineered for durable, reliable service in marine environments, supporting boat maintenance and marine equipment installations with a precision design built to endure demanding sea conditions. High-quality construction helps deliver long-lasting performance, and the listed shipping weight of 0.40 kg supports straightforward handling as a Jabsco spare part. |
$ 208.02
-
+
|
|
1-2 weeks delivery time The Jabsco 21849 mechanical seal assembly is a durable sealing component that prevents leaks and helps maintain efficient, reliable pump operation in marine and industrial applications. Its lightweight 0.05 kg design simplifies handling, installation, and replacement, and it is intended to fit multiple Jabsco pump models. In some pumps, the assembly eliminates the need for a metal washer, reducing installation complexity while supporting long-lasting sealing performance under demanding conditions. |
$ 173.86
-
+
|
|
1-2 weeks delivery time The Jabsco 21858 lock nut is a replacement spare part, also referenced as Sherwood 21858, intended for service use where this specific lock nut is required. |
$ 1.49
-
+
|
|
1-2 weeks delivery time The Jabsco 21899-0005B impeller unit is built for safe, efficient pumping in food-grade and industrial service, using food-approved neoprene with a plastic insert for reliable operation. Its double flat drive interface supports secure torque transfer, while the 127 mm diameter and 102 mm depth are intended to deliver a precise fit in compatible impeller pumps. The product information also lists FDA and 3A certifications and a typical operating temperature range of approximately 4°C to 70°C. |
$ 687.52
-
+
|
|
1-2 weeks delivery time The Jabsco 21908 replacement spare part is supplied as an original spare part identified by part number 21908. |
$ 479.44
-
+
|
|
1-2 weeks delivery time The Jabsco 21909-0000 spare component is a Jabsco spare part supplied for replacement use where the matching part number is required. |
$ 923.14
-
+
|
|
1-2 weeks delivery time The Jabsco 21937-0000 wear plate component is a durable spare part designed to protect equipment and support smooth, efficient operation. Precision engineering and high-quality materials help enhance machinery performance and longevity by providing reliable wear protection in daily use. |
$ 1,986.19
-
+
|
|
1-2 weeks delivery time The Jabsco 21978-0000 replacement component is supplied as a Jabsco spare part for service and maintenance needs where the correct part number match is required. |
$ 2,453.70
-
+
|
|
1-2 weeks delivery time The Jabsco 21987 connection spare part is a 1.17 in connection component supplied as a Jabsco spare part, with Sherwood 21987 referenced in the product identification. |
$ 341.97
-
+
|
|
1-2 weeks delivery time The Jabsco 22039 cam component is a 3/4 cam spare part for the 270 Series, built from durable brass to deliver high-quality construction and reliable performance for equipment service and upgrades. |
$ 224.72
-
+
|
|
1-2 weeks delivery time The Jabsco 22040-0501 bronze impeller pump is a 2 inch pump with a 270 flange designed to support smooth operation and consistent flow for fluid transfer and circulation needs in marine and industrial applications. It features square flange connections with a 57 mm internal diameter and is built for reliable performance in demanding environments, with a listed shipping weight of 8.20 kg. |
$ 2,324.27
-
+
|
|
1-2 weeks delivery time The Jabsco 22040-0701S engine cooling pump is a self-priming bronze impeller unit built for demanding marine engine cooling service. Its flange-type, size 270 design uses square flange connections (86 mm x 86 mm) with a 57 mm internal diameter, and it includes a neoprene impeller for dependable cooling-water circulation. A stainless steel shaft with a mechanical seal helps reduce wear, while the shaft drive with key and lock nut supports secure installation; it is frequently used on MAN D2530M, D2540L, D2540ML, and D2540MT engines. |
$ 3,198.92
-
+
|
|
|
1-2 weeks delivery time The Jabsco 22064-0100 replacement component is a genuine Jabsco spare part intended for service and maintenance where this specific part number is required, helping restore equipment function with correct part matching. |
$ 2,953.98
-
+
|
|
1-2 weeks delivery time The Jabsco 22130-2721 macerator pump unit delivers efficient waste-water evacuation for marine and RV sanitation systems with 110 V / 240 V operation (also listed as 110/220 V and 110/230 V) at 50 Hz. A stainless steel cutter reduces solids to a maximum particle size of 3 mm (1/8 inch), while the self-priming design supports installation flexibility with priming performance listed up to 1.2 m. Built with long-lasting stainless steel bolts and wear-resistant components such as an oil-resistant nitrile impeller and stainless steel wear plate, it supports strong output up to 46 L/min at 1.5 m head and 36 L/min at 6 m head using the specified hose and threaded connections. |
$ 2,132.86
-
+
|
|
1-2 weeks delivery time The Jabsco 22138B motor assembly is a key drive unit built for the Jabsco 22130 model, delivering efficient power to run the pump in marine applications. Precision engineering, advanced technology, and durable construction help ensure reliable operation and long service life for demanding onboard use. |
$ 2,290.28
-
+
|
|
1-2 weeks delivery time The Jabsco 22174-2100 spare component is a genuine replacement part identified as a Jabsco spare part, supplied under the listed part number for straightforward ordering and service replacement. |
$ 1,393.61
-
+
|
|
1-2 weeks delivery time The Jabsco 22220-241 bronze engine cooling pump is built for efficient engine cooling with 1 in BSP (British Standard Pipe) connections for a secure fit and straightforward integration into your cooling system. Its bronze construction provides strong corrosion resistance to support long service life and reliable performance in marine and industrial pump applications. |
$ 1,722.65
-
+
|
What is the function of a Jabsco marine toilet, and how does it differ from other types of marine toilets?
A Jabsco marine toilet is designed to handle marine sanitation efficiently by flushing waste into a holding tank or overboard, depending on regulations. It differs from other types of marine toilets by offering both manual and electric models, including the quiet flush variant, which reduces noise for a more comfortable onboard experience. As a leading manufacturer, Jabsco provides reliable marine waste system components that integrate seamlessly with other marine products, such as bilge pumps and water systems, ensuring smooth operation and sanitation on any vessel.
A key advantage of using Jabsco marine toilets is their ability to integrate seamlessly with other Jabsco products, such as searchlights and marine waste systems, providing a comprehensive solution for onboard needs. With expertise in marine water systems, Jabsco ensures that both manual and electric toilet models, including the Jabsco manual toilet, function efficiently even under challenging conditions. Established as an expert in the field, Jabsco continues to innovate and provide high-quality sanitation solutions that meet the demands of marine environments.
How does the Jabsco engine cooling pump help maintain engine temperature and performance in marine environments?
The Jabsco engine cooling pump plays a crucial role in maintaining engine temperature and performance in marine environments by circulating water through the engine to dissipate heat. This pump ensures that the engine runs smoothly by preventing overheating, which can lead to mechanical failure. As a part of Jabsco marine products, these pumps are designed for durability and efficiency, providing reliable performance with easy access to spares and accessories for maintenance.
In what types of boats are Jabsco bilge pumps most commonly used, and why?
Jabsco bilge pumps are most commonly used in a variety of boats, including fishing boats, sailboats, and cruisers, due to their reliability and efficiency in removing excess water. These marine pumps, often combined with rule pumps and equipped with reliable valves, ensure effective water discharge and prevent flooding, maintaining optimal safety and performance. Their widespread use is supported by the brand's reputation for quality and the availability of replacement parts.