Since its inception in 1899, BUKH has been manufacturing marine engines. With over a century of experience, these engines have evolved to become some of the most reliable in the world.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Bukh engine support is designed for marine engine mounting and installation applications. |
$ 270.13
-
+
|
|
1-2 weeks delivery time The Bukh 000E6038 coupling half is a drivetrain coupling component for BUKH BW7 and BUKH SD installations. Designed to form one side of the coupling connection, it helps transmit engine torque into the drive system while supporting secure alignment between connected drivetrain elements in marine propulsion setups. |
$ 249.92
-
+
|
|
1-2 weeks delivery time The Bukh 000E6040 shaft locking plate is a practical retention component for D30 shaft installations, designed to help secure fasteners against loosening in high-vibration marine service. Used as part of a shaft fastening arrangement, it supports reliable assembly integrity and helps maintain correct alignment and clamp load over time. |
$ 20.08
-
+
|
|
1-2 weeks delivery time The Bukh 000E6054 valve spring is a precision valvetrain component for BUKH DV10 and DV20 marine diesel engines. It helps control valve motion by maintaining proper closing force, supporting stable combustion, consistent compression, and dependable engine operation in marine service. |
$ 47.40
-
+
|
|
1-2 weeks delivery time The Bukh 000E6091 rear WT cover is a fitted closing panel for the WT assembly on BUKH DV10-24 marine diesel engines. Designed to restore correct enclosure and protection at the rear of the WT unit, it helps keep the assembly properly covered for dependable engine-room operation. |
$ 363.40
-
+
|
|
1-2 weeks delivery time The Bukh locking screw modification is intended for marine engine fastening and service applications. |
$ 37.19
-
+
|
|
1-2 weeks delivery time The Bukh 000E6285 copper pipe is a formed metal line designed for BUKH DV36 and DV48 marine diesel engines. Used as part of the engine’s pipework, it supports secure fluid routing and dependable operation by maintaining an OEM-style fit in the onboard system layout. |
$ 1,325.17
-
+
|
|
1-2 weeks delivery time The Bukh 000E6338 turbocharger seal is a dedicated sealing component for the turbo assembly, helping maintain a tight, leak-resistant joint where the turbocharger is installed. Designed for dependable marine service, it supports stable turbo operation by keeping pressure and flow paths properly sealed during continuous engine loading. |
$ 24.09
-
+
|
|
1-2 weeks delivery time The Bukh 000E6358 oil gasket is a sealing element for the turbocharger oil system on BUKH DV48 marine diesel engines. Designed to help create a tight seal at the oil connection, it supports clean, leak-free operation and dependable lubrication flow to the turbocharger during continuous marine service. |
$ 23.31
-
+
|
|
1-2 weeks delivery time The Bukh 000E6543 locking screw is a secure closure fastener used on BUKH DV10LME marine engines to lock and seal a threaded port in its intended assembly. It helps maintain system integrity by keeping the connection tight under vibration, supporting clean, dependable engine operation in marine service. |
$ 65.90
-
+
|
|
1-2 weeks delivery time The Bukh intermediate shaft is intended for marine drivetrain and transmission connection applications. |
$ 943.36
-
+
|
|
1-2 weeks delivery time The Bukh 000E6691 intermediate housing is a structural engine component designed to support and locate adjoining parts within a Bukh assembly. Built for dependable alignment and secure mounting, it helps maintain proper fit between connected sections, supporting smooth operation and serviceable installation in Bukh engine applications. |
$ 1,672.26
-
+
|
|
1-2 weeks delivery time The Bukh 000E6851 intermediate arm is a linkage component used on BUKH ADV10LME and DV10LME engines to transmit movement between connected parts in the related arm assembly. Built as a direct replacement part, it helps maintain precise, dependable mechanical operation where accurate motion transfer matters onboard. |
$ 81.43
-
+
|
|
1-2 weeks delivery time The Bukh 000E6907 charge controller holder provides a secure mounting point for the charge controller in a marine electrical installation. Designed as a dedicated bracket-style support, it helps keep the controller firmly positioned to reduce vibration-related stress and maintain a clean, service-friendly installation. |
$ 148.27
-
+
|
|
1-2 weeks delivery time The Bukh 000E7013 air filter bushing is a precision fit component for the air filter assembly on BUKH DV10LME marine diesel engines. It supports secure mounting and correct alignment of the air filter parts, helping maintain a stable, rattle-free installation and consistent airflow management in the engine’s intake system. |
$ 50.56
-
+
|
|
1-2 weeks delivery time The Bukh 000E7029 cover lid with an alarm hole is a practical replacement component designed to close and protect its housing while providing a dedicated pass-through for an alarm device or indicator. It supports clean installation and helps keep the alarm arrangement securely positioned in place. |
$ 47.12
-
+
|
|
1-2 weeks delivery time The Bukh gear wheel is intended for marine engine gear train and drivetrain service applications. |
$ 880.67
-
+
|
|
1-2 weeks delivery time The Bukh 000E7075 insulated socket is an electrical insulating component used to separate and protect conductors and connection points in marine installations. It helps reduce the risk of unintended electrical contact by providing isolation where secure, vibration-resistant routing and protection are required. |
$ 53.86
-
+
|
What are the key features of BUKH marine diesel engines that make them suitable for lifeboats?
BUKH marine diesel engines are specifically designed for lifeboats, ensuring reliability and compliance with SOLAS marine safety standards. Their compact, lightweight design and ability to start manually or with minimal power make them ideal for emergency situations. Additionally, these engines are built to endure harsh marine environments, providing smooth operation and minimal vibration for both commercial and leisure applications.
How does BUKH ensure its diesel motors meet international marine safety standards?
BUKH ensures its diesel motors meet international marine safety standards by designing and manufacturing engines in compliance with stringent SOLAS requirements. These compact, lightweight diesel engines are engineered in Denmark with a focus on reliability and durability, making them suitable for both commercial and leisure applications. The company's reputation for quality is reinforced through genuine parts, meticulous service systems, and thorough testing to meet the needs of operators and owners worldwide.
How does the water cooling system in BUKH engines contribute to their efficiency and reliability?
The water cooling system in BUKH engines enhances efficiency and reliability by maintaining optimal operating temperatures during extended use. This system ensures the compact lightweight diesel engine runs smoothly, even under demanding conditions, by dissipating heat effectively. Designed to suit all commercial and leisure applications, it reduces wear on internal components and supports consistent performance for work boats and inboard setups.
What does SOLAS marine approval mean for BUKH diesel engines used in lifeboats and rescue boats?
SOLAS approval for BUKH engines confirms they meet the strictest global standards for maritime safety. This certification is a fundamental requirement for powering marine safety equipment on merchant vessels. It provides absolute confidence that these diesels will start and perform under the most severe emergency conditions at sea.
How are models like the BUKH DV10, DV24, and DV36 designed to be among the most reliable diesel engines in the world?
Reliability stems from a philosophy of robust simplicity, honed over decades as one of the world's leading OEM manufacturers of marine diesel engines for lifeboats. Key design principles include: over-engineered, low-stress internal components; minimalistic systems with fewer potential failure points; use of corrosion-resistant materials for longevity.
What are the advantages of a keel-cooled BUKH engine compared to a conventional raw-water cooled system?
Keel-cooled BUKH engines use a closed, internal coolant loop that shields the system from silt, salt, and debris, resulting in drastically reduced corrosion and abrasion. Maintenance focuses on the external keel exchanger, making them ideal for shallow, muddy, or high-salinity waters with simplified cold weather readiness using standard antifreeze. In contrast, raw-water cooled systems constantly ingest surrounding water, leading to elevated wear on pumps and passages, demanding frequent strainer and impeller care, and requiring thorough drainage to prevent freeze damage.
How does the 20hp and 24hp power range of BUKH engines match typical lifeboat and workboat requirements?
The DV20 and 24 hp outputs deliver the ideal balance of thrust and control for small craft. This power band provides ample force for rapid launch and strong headway while maintaining manageable handling for precise rescue maneuvers.
What spare parts and service support are available to BUKH engine owners to ensure long-term reliability?
A global network of specialist distributors ensures genuine spare parts and expert service are accessible for the lifespan of your installation. Support includes: worldwide availability of legacy component kits; technical guidance for maintenance and keel cooled system checks; OEM-backed repair protocols from the manufacturer.
How does the gearbox configuration on BUKH DV series engines contribute to safe and predictable maneuvering?
The integrated gearbox offers precise and immediate response to helm inputs. This direct control is vital for safe maneuvering in close quarters during high-stress recovery operations. Its predictable performance allows operators to focus on the rescue, not the engine's behavior.