Since its inception in 1899, BUKH has been manufacturing marine engines. With over a century of experience, these engines have evolved to become some of the most reliable in the world.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Bukh 212-97110 equal ended coupling (MC108) is a fuel-connection fitting used on BUKH EPA28, EPA36, and EPA48 marine engines. Designed to join fuel lines with a secure, consistent connection, it supports clean routing and dependable sealing within the engine’s fuel connection layout. |
$ 60.85
-
+
|
|
1-2 weeks delivery time The Bukh 212-97112 male stud coupling is a 1/4 BSPT threaded connector used on BUKH EPA28, EPA36 and EPA48 marine diesel engines for both the flywheel housing and fuel connection assemblies. Designed to create a secure, service-friendly joint, it helps ensure tight, dependable threaded connections where a compact stud-style fitting is required. |
$ 22.61
-
+
|
|
1-2 weeks delivery time The Bukh 212-97113 male compression elbow provides a secure 90-degree connection point in the fuel connection layout on BUKH EPA48 marine engines. Built to route fuel lines cleanly in tight engine-room spaces, it supports leak-resistant plumbing and dependable fuel delivery by joining an 8 mm line to a 1/8 BSPT threaded port. |
$ 55.31
-
+
|
|
1-2 weeks delivery time The Bukh 212-97114 fuel compression union elbow is a threaded fuel-connection fitting used on BUKH EPA28, EPA36, and EPA48 marine diesel engines. Designed as a 1/4 BSPT elbow (ME108/163), it supports secure routing of fuel lines in tight installations, helping maintain leak-resistant, dependable connections in the engine’s fuel system. |
$ 44
-
+
|
|
1-2 weeks delivery time The Bukh 212-97119 equal elbow ME108 is a fuel-connection fitting used on BUKH EPA28, EPA36, and EPA48 marine diesel engines. Designed to route fuel lines through a right-angle turn while maintaining a matching connection size, it supports clean hose alignment and secure plumbing in the engine’s fuel connection assembly. |
$ 52
-
+
|
|
1-2 weeks delivery time The Bukh 212-99385 threaded male-to-male adapter connects 1/4 in and 3/8 in BSP fittings in the BUKH EPA48 header tank assembly. It provides a secure interface for coolant hose or pipe connections, supporting a tight, service-ready installation in the engine’s cooling system. |
$ 27.67
-
+
|
|
1-2 weeks delivery time The Bukh 212-99403 galvanized 3/8 BSP plug is a compact sealing component used on the header tank of BUKH EPA28, EPA36, and EPA48 marine engines. It closes off a threaded port to help keep the cooling system properly sealed, supporting stable coolant retention and reliable engine temperature control. |
$ 13.20
-
+
|
|
1-2 weeks delivery time The Bukh 21350-3A100 timing chain cover assembly is a dedicated cover unit for the timing chain cover area on BUKH S270J marine diesel engines. It closes off and protects the timing drive section, supporting clean, secure operation of the engine’s front-end timing components in marine service. |
$ 1,191.69
-
+
|
|
1-2 weeks delivery time The Bukh 21352-3A000 sealing component is designed for the timing chain cover on BUKH S270J marine diesel engines. It helps maintain a tight seal at the cover interface, supporting clean, reliable operation by keeping fluids contained and protecting the timing chain area from unwanted ingress in a marine environment. |
$ 49.64
-
+
|
|
1-2 weeks delivery time The Bukh 21353-3A000 sealing element is designed for the timing chain cover on BUKH S270J marine diesel engines. Installed as part of the timing chain cover assembly, it helps maintain a tight seal to keep oil where it belongs and protect the timing area for dependable operation on board. |
$ 70.20
-
+
|
|
1-2 weeks delivery time The Bukh 21354-3A002 left timing chain case cap is a dedicated cover component for the timing chain cover area on BUKH S270J marine diesel engines. It helps close and protect the timing chain case, supporting clean operation and safeguarding internal timing components in a harsh marine engine-room environment. |
$ 154.12
-
+
|
|
1-2 weeks delivery time The Bukh 21355-3A100 right-hand cap assembly for the timing chain cover is designed for BUKH S270J marine diesel engines. Used on the timing chain cover, this component supports a secure, protected enclosure around the timing chain area to help maintain reliable engine operation in marine service. |
$ 97.58
-
+
|
|
1-2 weeks delivery time The Bukh 21356-3A000 timing chain cover bracket provides secure support within the timing chain cover assembly on BUKH S270J marine diesel engines. Designed to hold and stabilize the chain case hardware, it helps maintain correct component alignment and dependable timing drive protection in harsh marine operating conditions. |
$ 25.04
-
+
|
|
1-2 weeks delivery time The Bukh 21358-3A001 oil filler cap provides a secure seal for the oil fill point on the timing chain cover of BUKH S270J marine diesel engines. Designed to close off the oil filler opening, it helps keep the lubrication system protected from contamination while supporting clean, straightforward oil servicing. |
$ 14.49
-
+
|
|
1-2 weeks delivery time The Bukh 21360-3A100 front timing chain cover assembly secures and protects the timing chain cover area on BUKH S270J marine diesel engines. Designed as an OEM-fit cover unit, it helps shield internal timing components from contaminants while supporting a properly enclosed front engine assembly for dependable operation at sea. |
$ 691.71
-
+
|
|
1-2 weeks delivery time The Bukh 21362-3A000 fuel pump cover is a dedicated cover component for the fuel pump area on BUKH S270J marine diesel engines. Installed at the timing chain cover assembly, it helps protect the fuel pump interface and supports a clean, secure engine layout suited to continuous marine operation. |
$ 47.94
-
+
|
|
1-2 weeks delivery time The Bukh 21364-3A000 front oil seal is a precision sealing component for the timing chain cover area on BUKH S270J marine diesel engines. It helps retain engine oil where the rotating shaft passes through the front cover, supporting clean operation and protecting surrounding components from oil leakage in continuous marine service. |
$ 25.04
-
+
|
|
1-2 weeks delivery time The Bukh 21365-3A000 sealing O-ring is a dedicated seal for the timing chain cover on BUKH S270J marine diesel engines. It helps maintain a tight joint at the cover interface, supporting clean, reliable engine operation by keeping fluids contained where they belong. |
$ 19.66
-
+
|
What are the key features of BUKH marine diesel engines that make them suitable for lifeboats?
BUKH marine diesel engines are specifically designed for lifeboats, ensuring reliability and compliance with SOLAS marine safety standards. Their compact, lightweight design and ability to start manually or with minimal power make them ideal for emergency situations. Additionally, these engines are built to endure harsh marine environments, providing smooth operation and minimal vibration for both commercial and leisure applications.
How does BUKH ensure its diesel motors meet international marine safety standards?
BUKH ensures its diesel motors meet international marine safety standards by designing and manufacturing engines in compliance with stringent SOLAS requirements. These compact, lightweight diesel engines are engineered in Denmark with a focus on reliability and durability, making them suitable for both commercial and leisure applications. The company's reputation for quality is reinforced through genuine parts, meticulous service systems, and thorough testing to meet the needs of operators and owners worldwide.
How does the water cooling system in BUKH engines contribute to their efficiency and reliability?
The water cooling system in BUKH engines enhances efficiency and reliability by maintaining optimal operating temperatures during extended use. This system ensures the compact lightweight diesel engine runs smoothly, even under demanding conditions, by dissipating heat effectively. Designed to suit all commercial and leisure applications, it reduces wear on internal components and supports consistent performance for work boats and inboard setups.
What does SOLAS marine approval mean for BUKH diesel engines used in lifeboats and rescue boats?
SOLAS approval for BUKH engines confirms they meet the strictest global standards for maritime safety. This certification is a fundamental requirement for powering marine safety equipment on merchant vessels. It provides absolute confidence that these diesels will start and perform under the most severe emergency conditions at sea.
How are models like the BUKH DV10, DV24, and DV36 designed to be among the most reliable diesel engines in the world?
Reliability stems from a philosophy of robust simplicity, honed over decades as one of the world's leading OEM manufacturers of marine diesel engines for lifeboats. Key design principles include: over-engineered, low-stress internal components; minimalistic systems with fewer potential failure points; use of corrosion-resistant materials for longevity.
What are the advantages of a keel-cooled BUKH engine compared to a conventional raw-water cooled system?
Keel-cooled BUKH engines use a closed, internal coolant loop that shields the system from silt, salt, and debris, resulting in drastically reduced corrosion and abrasion. Maintenance focuses on the external keel exchanger, making them ideal for shallow, muddy, or high-salinity waters with simplified cold weather readiness using standard antifreeze. In contrast, raw-water cooled systems constantly ingest surrounding water, leading to elevated wear on pumps and passages, demanding frequent strainer and impeller care, and requiring thorough drainage to prevent freeze damage.
How does the 20hp and 24hp power range of BUKH engines match typical lifeboat and workboat requirements?
The DV20 and 24 hp outputs deliver the ideal balance of thrust and control for small craft. This power band provides ample force for rapid launch and strong headway while maintaining manageable handling for precise rescue maneuvers.
What spare parts and service support are available to BUKH engine owners to ensure long-term reliability?
A global network of specialist distributors ensures genuine spare parts and expert service are accessible for the lifespan of your installation. Support includes: worldwide availability of legacy component kits; technical guidance for maintenance and keel cooled system checks; OEM-backed repair protocols from the manufacturer.
How does the gearbox configuration on BUKH DV series engines contribute to safe and predictable maneuvering?
The integrated gearbox offers precise and immediate response to helm inputs. This direct control is vital for safe maneuvering in close quarters during high-stress recovery operations. Its predictable performance allows operators to focus on the rescue, not the engine's behavior.