Since its inception in 1899, BUKH has been manufacturing marine engines. With over a century of experience, these engines have evolved to become some of the most reliable in the world.
Fast deliveries of yacht equipment, calculation, selection of analogues and spare parts. Send us your request and we will contact you ASAP with a solution. We deliver in Cyprus, throughout Europe and worldwide. More than 10 years of experience.
Email us: info@yacht-supply24.com or fill our Feedback form.
You can also fill out the "Ask a question" form on the right or at the bottom of the page.
|
1-2 weeks delivery time The Bukh gasket is intended for marine engine sealing and service applications. |
$ 12.10
-
+
|
|
1-2 weeks delivery time The Bukh 620L0658 valve train push rod (250 mm length) is designed for BUKH DV10LME marine diesel engines. It transmits camshaft-driven motion to the valve gear for accurate valve operation, helping maintain stable running and dependable performance when replacing worn or bent valve train components. |
$ 309.80
-
+
|
|
1-2 weeks delivery time The Bukh gasket is intended for marine engine sealing and service applications. |
$ 11.13
-
+
|
|
1-2 weeks delivery time The Bukh 620L0724 vent is a dedicated engine venting component for BUKH DV10LME marine diesel engines. Designed to support proper ventilation and controlled pressure relief, it helps keep the engine’s venting function working reliably for stable operation in marine service. |
$ 275.98
-
+
|
|
1-2 weeks delivery time The Bukh breather pipe gasket is designed for marine diesel crankcase ventilation sealing applications. |
$ 15.14
-
+
|
|
1-2 weeks delivery time The Bukh 620L2166 piston ring set is a precision replacement set for BUKH DV18 marine diesel engines, designed to restore proper sealing at the piston and cylinder interface. It helps maintain strong compression, supports stable combustion, and contributes to controlled oil management for dependable engine performance. |
$ 639.61
-
+
|
|
1-2 weeks delivery time The Bukh 620L2303 fuel feed pump supports clean, consistent diesel supply on BUKH DV18 marine engines. Installed in the fuel delivery system, this pump helps move fuel from the tank toward the engine’s filtration and injection components, promoting steady operation and dependable starting. |
$ 1,068.77
-
+
|
|
1-2 weeks delivery time The Bukh cap nut is intended for marine engine fastening and protection applications. |
$ 2.38
-
+
|
|
1-2 weeks delivery time The Bukh 7 ft cable is intended for marine engine control or electrical connection applications. |
$ 137.25
-
+
|
|
1-2 weeks delivery time The Bukh 10 ft cable is intended for marine engine control or electrical connection applications. |
$ 145.21
-
+
|
|
1-2 weeks delivery time The Bukh 15 ft cable is designed for marine engine control or electrical connection applications. |
$ 237.77
-
+
|
|
1-2 weeks delivery time The Bukh 20 ft cable is intended for marine engine control or electrical connection applications. |
$ 191.77
-
+
|
|
1-2 weeks delivery time The Bukh 25 ft cable is designed for marine engine control or electrical connection applications. |
$ 215.07
-
+
|
|
1-2 weeks delivery time The Bukh custom paint option is intended for marine engine finishing and color matching applications. |
$ 4,701.93
-
+
|
|
1-2 weeks delivery time The Bukh 66-3036 propeller set is designed to deliver dependable thrust and smooth power transfer in Bukh marine propulsion applications. As a direct replacement propeller solution, it supports efficient drive performance and helps maintain predictable handling and cruising characteristics on vessels equipped with Bukh propulsion hardware. |
$ 7,372.37
-
+
|
|
1-2 weeks delivery time The Bukh M4 lock nut is designed for marine engine vibration-resistant fastening applications. |
$ 1.73
-
+
|
|
1-2 weeks delivery time The Bukh 66706-5512 start switch is a home switch used as a replacement equivalent to Bukh 600-00057. Designed for dependable operator start control, it supports reliable engagement of the engine starting circuit and is well-suited for marine duty where clean, consistent switch operation is essential. |
$ 603.75
-
+
|
|
1-2 weeks delivery time The Bukh flange bolt is intended for marine engine assembly and fastening applications. |
$ 2.81
-
+
|
What are the key features of BUKH marine diesel engines that make them suitable for lifeboats?
BUKH marine diesel engines are specifically designed for lifeboats, ensuring reliability and compliance with SOLAS marine safety standards. Their compact, lightweight design and ability to start manually or with minimal power make them ideal for emergency situations. Additionally, these engines are built to endure harsh marine environments, providing smooth operation and minimal vibration for both commercial and leisure applications.
How does BUKH ensure its diesel motors meet international marine safety standards?
BUKH ensures its diesel motors meet international marine safety standards by designing and manufacturing engines in compliance with stringent SOLAS requirements. These compact, lightweight diesel engines are engineered in Denmark with a focus on reliability and durability, making them suitable for both commercial and leisure applications. The company's reputation for quality is reinforced through genuine parts, meticulous service systems, and thorough testing to meet the needs of operators and owners worldwide.
How does the water cooling system in BUKH engines contribute to their efficiency and reliability?
The water cooling system in BUKH engines enhances efficiency and reliability by maintaining optimal operating temperatures during extended use. This system ensures the compact lightweight diesel engine runs smoothly, even under demanding conditions, by dissipating heat effectively. Designed to suit all commercial and leisure applications, it reduces wear on internal components and supports consistent performance for work boats and inboard setups.
What does SOLAS marine approval mean for BUKH diesel engines used in lifeboats and rescue boats?
SOLAS approval for BUKH engines confirms they meet the strictest global standards for maritime safety. This certification is a fundamental requirement for powering marine safety equipment on merchant vessels. It provides absolute confidence that these diesels will start and perform under the most severe emergency conditions at sea.
How are models like the BUKH DV10, DV24, and DV36 designed to be among the most reliable diesel engines in the world?
Reliability stems from a philosophy of robust simplicity, honed over decades as one of the world's leading OEM manufacturers of marine diesel engines for lifeboats. Key design principles include: over-engineered, low-stress internal components; minimalistic systems with fewer potential failure points; use of corrosion-resistant materials for longevity.
What are the advantages of a keel-cooled BUKH engine compared to a conventional raw-water cooled system?
Keel-cooled BUKH engines use a closed, internal coolant loop that shields the system from silt, salt, and debris, resulting in drastically reduced corrosion and abrasion. Maintenance focuses on the external keel exchanger, making them ideal for shallow, muddy, or high-salinity waters with simplified cold weather readiness using standard antifreeze. In contrast, raw-water cooled systems constantly ingest surrounding water, leading to elevated wear on pumps and passages, demanding frequent strainer and impeller care, and requiring thorough drainage to prevent freeze damage.
How does the 20hp and 24hp power range of BUKH engines match typical lifeboat and workboat requirements?
The DV20 and 24 hp outputs deliver the ideal balance of thrust and control for small craft. This power band provides ample force for rapid launch and strong headway while maintaining manageable handling for precise rescue maneuvers.
What spare parts and service support are available to BUKH engine owners to ensure long-term reliability?
A global network of specialist distributors ensures genuine spare parts and expert service are accessible for the lifespan of your installation. Support includes: worldwide availability of legacy component kits; technical guidance for maintenance and keel cooled system checks; OEM-backed repair protocols from the manufacturer.
How does the gearbox configuration on BUKH DV series engines contribute to safe and predictable maneuvering?
The integrated gearbox offers precise and immediate response to helm inputs. This direct control is vital for safe maneuvering in close quarters during high-stress recovery operations. Its predictable performance allows operators to focus on the rescue, not the engine's behavior.